10.0 kW Fronius Symo Gen 24 Inverter User Guide

June 1, 2024
Fronius

10.0 kW Fronius Symo Gen 24 Inverter

10.0 kW Fronius Symo Gen 24 Inverter

WARNING!

Operating the equipment incorrectly or poor workmanship can cause serious injury or damage. The inverter may only be installed and commissioned by trained personnel acting in accordance with the technical regulations. Before working with the device, ensure that you have read and understood all the documents provided (both hard copies enclosed with the product and documents provided online). Caution! When solar modules are exposed to light, they supply voltage to the inverter. This document does not describe all of the possible system configurations. Fronius International GmbH declares that the radio equipment type Fronius Symo GEN24 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.fronius.com

Execution of the Self-test

Fronius Symo GEN24 3.0 – 5.0 / 3.0 – 5.0 Plus

manuals.fronius.com/html/4204260388/#0_m_0000021045

Fronius Symo GEN24 8.0 – 10.0 / 8.0 – 10.0 Plus

manuals.fronius.com/html/4204260315/#0_m_0000021045

Fronius Symo GEN24 6.0 – 10.0 SC / 6.0 – 10.0 Plus SC

https://manuals.fronius.com/html/4204260492/#0_m_0000021045

Operating Instructions

Only suitable battery configurations for Fronius GEN24 inverters permitted.

Fronius Symo GEN24
3 – 5 kW
3 – 5 kW Plus

manuals.fronius.com/html/4204260388

Fronius Symo GEN24
6 – 10 kW
6 – 10 kW Plus

manuals.fronius.com/html/4204260315

Fronius Symo GEN24
6 – 10 kW SC
6 – 10 kW Plus SC
QR Code

manuals.fronius.com/html/4204260492

Fronius Symo GEN24 Plus with third-party battery.
QR Code

https://www.fronius.com/en/solar-energy/installerspartners/downloads

Search for: „42,0410,2610“

Detailed, country-specific warranty terms are available on: www.fronius.com/solar/warranty

Warning signs explanation

General warning sign

Electricity hazard

Hot surface

Tools

Tools

To note during installation

DC Voltage
To note during installation
To note during installation
To note during installation

Mounting conditions

Mounting conditions
Mounting conditions

Mounting

Mounting

AC~

Mounting conditions
Mounting conditions
Mounting conditions
Mounting conditions
Mounting conditions
Mounting conditions

Data communication (optional)

Mounting conditions

Commissioning

Mounting conditions
Mounting conditions
Mounting conditions

Control panel

Mounting conditions

Setup with mobile phone

Setup with mobile phone

Setup with PC – Ethernet

Setup with PC - Ethernet

Setup with PC – WLAN

Setup with PC - WLAN
Setup with PC - WLAN

Technical Data (WLAN)
Frequency band: channel 1-14(2412-2462 MHz)
Radio-frequency power: <100 mW (<20 dBm)
IP WLAN: 192.168.250.181
IP LAN 1: 169.254.0.180

  • Please note that the BAT (RJ45) interface is reserved for future use and not given at the moment.

Fronius Symo GEN24 3.0 – 5.0 / 3.0 – 5.0 Plus

Dimensions (height x width x depth) 530 x 474 x 165 mm
Max. short-circuit current (ISC PV = ISC max) 20 A (MPPT1) / 20 A (MPPT2)
Battery voltage range 160 – 500 V

Fronius Symo GEN24 6.0 – 10.0 / 6.0 – 10.0 Plus / 6.0 – 10.0 SC / 6.0 – 10.0 Plus SC

Dimensions (height x width x depth) 595 x 529 x 180 mm
Max. short-circuit current (ISC PV = ISC max) 40 A (MPPT1) / 20 A (MPPT2)
Battery voltage range 160 – 500 V

fronius.com/en/solar-energy/installers-partners/products-solutions /monitoring-digital-tools
MONITORING & DIGITAL TOOLS
QR Code

Customer Support

Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Austria
contact@fronius.com
www.fronius.com

Under www.fronius.com/contact you will find the addresses of all Fronius Sales & Service Partners and locations.
Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals