logitech Pro X Wireless Headphone User Guide

June 8, 2024
Logitech

logitech Pro X Wireless Headphone User Guide
logitech Pro X Wireless Headphone

Package Contents

Package Contents
Package Contents
Package Contents

FEATURES

  1. Microphone mute toggle
  2. Volume wheel
  3. Power switch
  4. USB C charging port
  5. Microphone
    Features

HEADSET SETUP

  1. Connect microphone to headset
  2. Plug receiver into USB port
  3. Turn on power switch
  4. Download and install optional software
    Setup Instruction

HEADSET OPERATION

Microphone mute toggle

  • Microphone is active when red is not visible Microphone is muted when red is visible.

Volume wheel

  • Rotate up to increase OS volume.
  • Rotate down to decrease OS volume

Power switch

  • Power is on when cyan is visible Power is off when red is visible Headset will power down automatically after 30 minutes of no audio to save battery life To resume use, turn the power off, then back on again Timeout value can be adjusted in G HUB.

USB C charging port

  • Use provided USB A to USB C charging cable to charge headset by plugging into USB port on PC Cable is for charging and firmware update only – audio will not play over wired connection.

Microphone

  • For optimal voice pickup, place foam ball approximately two fingers’ width from the corner of your mouth Blue VO!CE functionality can be enabled using G HUB software.

©2020 Logitech Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals