UMIDIGI G1 MP08 Smartphone User Manual
- June 8, 2024
- Umidigi
Table of Contents
G1 MP08 Smartphone
User Manual
G1
G1 MP08 Smartphone
MPO8 Thanks for choosing UMIDIGI products
www.umidigi.com
Amazon service
Email:amazonservice@umidigi.com
Building a great phone Is hard enough, so building a great phone on a budget
should be infinitely more difficult. Big thanks to all who made this
superphone super awesome by contributing valu- able time and developing
hardware, software & other developments. Thanks for choosing UMIDIGI products,
thanks to your support our value can be realized and we can constantly move
forward to create smart devices with better user experience.
www.umidigi.com
Scan following QR-codes to follow us and enter giveaway to win a UMIDIGI smart
device for free!
VK: vk.com/umidigi
YouTube: youtube.com/umidigi
Facebook: facebook.com/Umidigi
Twitter: twitter.com/umidigi
Instagram: instagram.com/umidigi
UMIDIGI is registered trademark by Shenzhen Youmi Intelligent Technology Co.,
Ltd. All other trademarks are the property of their respective owner.
PRODUCT HEX-VISION IMAGE
POWER BUTTON
: Long press to turn on the device; When the device is on, short press Power
Button to shutdown or turn on the screen.
PRODUCT HEX-VISION IMAGE 
VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.
CARD INSERT MANUAL
Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the
slot. Be aware of the direction of the cut edge when placing the Nano-SIM card
into the slot.
Reminder:
Please use standard Nano-SIM card. Please don’t use a non-standard card that
is hand-cut, in order to prevent the SIM slot and card tray from being damaged
and card-rejection situation that may cause damage to the phone.
TF Card
Installation
Please place the metal contact of the TF card adown, be aware of the direction
of the cut edge. Place the card onto the tray and insert into the device.
Reminder: Please turn off the phone before changing or replacing the TF
card.TF card does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be
careful when using the slot thimble from scratching the phone.
DUAL-SIM MANAGEMENT
Please choose which SIM card slot to be the main one to be for 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G12G via Setting>Network&Intemet>Mobile network >Preferred network type
NETWORK CONNECTION
Connecting WLAN
Into the setting of WLAN via Settings>Network&Intemet>Wi-Fi When WLAN is on, a
list available WiFi connection will appear. Click on the one you want to
connect to, enter the password if the network isencrypted, then click Connect.
When it’s a public network, just click Connect When the network shows
“connected”, it is available to use
Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected
devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button
then select “Refresh”, then the phone will search for available Bluetooth
devices for pairing and list on the screen. Click on the one you want to pair
with, then click “Pair” on the dialog pop-up.Documents are available for
transmission after Bluetooth pairing.
Reminder: Slide down the status bar twice to open the shortcut switches
for Bluetooth and other functions.
WLAN Hot-spot Setting
Click on via Sedings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to turn
on the Portable WLAN Hot-spot function. When setting up WLAN hot-spot, enter
your user name in “Network Name” and password, then click Save. Another device
can use the WLAN hot-spot by searching and entering the password of the
password.
Reminder: Please enable the Data Connection before enabling the network
sharing function. Your mobile traffic will be shared by other devices, so
please use it carefully. The signal of the WLAN hot-spot depends on the signal
strength and devices
CAMERA
Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, panorama to take photos/videos.
INSTRUCTIONS FOR DUAL-CARD STANDBY
‘Dual card, dual standby, single pass” means you can insert two SIM cards and have them both “standby”, but cannot make phone calls at the same time. During the standby mode both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls nor make phone calls.
SECURITY INFORMATION
Security information (including BS, ES, battery security information) of
third-party software installation and function may vary in different regions
or by different hardware specifications. UMIDIGI holds disclaimer for the
performance problem or incompatibility caused by third-party applications,
registry editing, OS software modifying. Customizing the OS may cause the
device or some applications fail to work properly. Please prevent the device
or the battery in extreme cold/hot condition. The extreme temperature will
lead to deformation of the phone and reduce the charging capacity and battery
life.
Please only use the custom designed and approved battery and recharger by
UMIDIGI. Incompatible battery and recharger may cause damage to the phone.
Please abide by local regulation when disposing of the used batteries and
phones.
Please do not place the battery or the phone onto or inside heating devices
such as microwave, oven or radiator. The battery may explode if it gets too
hot.
Please do not crush or pierce the battery. Prevent the battery from getting
high pressure from outside, it may cause internal short and overheating
BASIC INFORMATION
Model
Operating System
CPU
GPU
RAM
ROM
Battery| G1
Android”‘ 12 Go
4x ARM Cortex-A53 Mpcore up to 1.5GHz
IMG 8XE 1PPC@ 570MHz
2GB
32GB
5150mAh
Display
Screen Size
Resolution
Touch| 6.52 inch
720×1600 Pixels
Capacitive multi-touch
Cameras
Rear Camera
Front Camera| 13MP+2MP Camera
5MP Camera
Connection(I/O)
Band
SIM/TF card WIFI
Bluetooth
GNSS
FM
Earphone Port USB Port| LTE FDD:B11213/415/7/8/12117/20/28A/28B LTE
TDD:B38/40141
WCDMA:B1/2/415/8 GSM:B2/3/5/8
2 Nano SIM Card Or 1 Nano SIM and 1 TF Card IEEE802.11 ac/a/b/gin
Bluetooth 4.2
GPS. Beidou. Glonass.Galileo
Yes
3.5mm
Type-C
Other Features
Video File Format Audio
File Format Card Extend
Language
Sensor| 3GP/MPEG4.etc.
WAV/MP3/AAC/AMR/MIDI/APE/WMA.etc.
Support TF card up to 256 GB
Support Multi-language
G-Sensor, P-Sensor,L-Sensor. Compass.
In the box
1 x Phone
1x Screen Protector (pre-applied)
1 x Phone Case
1x Type-C Cable
1 x Power Adapter
1x SIM Tray Ejector
1x Ouick Stan Guide| Android is a trademark of Google LLC.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This Product meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies.The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health. FCC RF
Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg
averaged over one gram of this Device C1 (FCC ID: 2ATZ4-G1C1F) has been tested
against this SAR limit. SAR information on this can be viewed on-line at
http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for
search. This device was tested for typical operations 10mm from the body. To
maintain compliance with FCC RF exposure requirements, 10mm separation
distance should. maintained to the user’s bodies
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the followingmeasures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Canadian regulatory statement
This device complies with Innovation, Science, and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
Mobile Phone has been tested and meets applicable limits for radio frequency
(RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the
body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that
set the limit averaged over 1 gram of tissue.
During testing, Model:A80 (IC: 26074-G1C1F) radios are set to their highest
transmission levels and placed in positions that simulate uses against the
head, with no separation, and when worn or carried against the torso of the
body, with 10mm separation. To reduce exposure to RF energy, use a hands-free
option, such as the built-in speakerphone, the supplied headphones, or other
similar accessories. Cases with metal parts may change the RF performance of
the device, including its compliance with RF exposure guidelines, in a manner
that has not been tested or certified. Although this device has been tested to
determine SAR in each band of operation, not all bands are available in all
areas. Bands are dependent on your service provider’s wireless and roaming
networks. 5150-5250MHz is restricted to indoor use only.
http://www.umidigi.com/
Follow UMIDIGI community.a place where you can share and discuss with UMIDIGl
Manufacturer:
Shenzhen Youmi Intelligent Technology Co., Ltd.
Add:406-407 Jinqi Zhigu Building,4/F,1
Tangling Road, Nanshan District, Shenzhen
City,Guangdong Province China
Made in China