SKYDANCE DMX512-SPI Decoder and RF Controller

DMX512-SPI Decoder and RF Controller
User Manual

DMX512-SPI Decoder and RF Controller

Model No.: DS
Compatible with 45 kinds of chips / Digital display / Stand-alone function/ Wireless remote control / Din rail

Features

• DMX512 to SPI decoder and RF controller with digital display.

• Compatible with 45 kinds of digital IC RGB or RGBW LED strips,
  IC type and R/G/B order can be set.
  Compatible chips: TM1803，TM1804，TM1809，TM1812，UCS1903，UCS1909，UCS1912，SK6813，UCS2903，UCS2909，UCS2912，WS2811，WS2812，WS2813，WS2815，TM1829，TLS3001，TLS3002，GW6205，MBI6120，TM1814B(RGBW)，SK6812(RGBW)，WS2813(RGBW)，WS2814(RGBW)，UCS8904B(RGBW)，SM16714(RGBW)，LPD6803，LPD1101，D705，UCS6909，UCS6912，LPD8803，LPD8806，WS2801，WS2803，P9813，SK9822，TM1914A，GS8206，GS8208，UCS2904，SM16804，SM16825，UCS2603，UCS5603.

• DMX decode mode, stand-alone mode and RF mode selectable.

• Standard DMX512 compliant interface, set DMX decode start address by buttons.

• Under stand-alone mode, change mode, speed or brightness by bottons.

• Under RF mode, match with RF 2.4G RGB/RGBW remote control.

• 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.

Technical Parameters

Input and Output

Input voltage| 5-24VDC
Power consumption| 1W
Input signal| DMX512 + RF 2.4GHz
Output signal| SPI(TTL)
The number of Dynamic mode| 32
Control dots| 170 pixels (RGB 510 CH)
Max 900 pixels
Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD,RED
Environment

Operation temperature| Ta: -30ºC ~ +55ºC
Case temperature (Max.)| T c: +65ºC
IP rating| IP20

Warranty and Protection

Weight

Mechanical Structures and Installations

Wiring Diagram Note:
● If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips.

Operation

IC type, RGB order and pixel length length setting

• You must rst assure IC type, RGB order and pixel length of the LED strip is correct.

• Long press M and ◀ key, prepare for setup IC type, RGB order, pixel length, automatic blank screen, Short press M key to switch four item.
  Press ◀ or ▶ key to setup value of each item.
  Long press M key for 2s, or timeout 10s, quit setting.
  

• IC type table:
  No.| IC type| Output signal
  ---|---|---
  C11| TM1803| DATA
  C12| TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813
  UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815| DATA
  C13| TM1829| DATA
  C14| TLS3001,TLS3002| DATA
  C15| Gw6205| DATA
  C16| MBI6120| DATA
  C17| TM1814B(RGBW)| DATA
  C18| SK6812(RGBW),WS2813(RGBW),WS2814(RGBW)| DATA
  C19| UCS8904B(RGBW)| DATA
  C21| LPD6803,LPD1101,D705,UCS6909,UCS6912| DATA,CLK
  C22| LPD8803,LPD8806| DATA,CLK
  C23| WS2801,WS2803| DATA,CLK
  C24| P9813| DATA,CLK
  C25| SK9822| DATA,CLK
  C31| TM1914A| DATA
  C32| GS8206,GS8208| DATA
  C33| UCS2904| DATA
  C34| SM16804| DATA
  C35| SM16825| DATA
  C36| SM16714(RGBW)| DATA
  C37| UCS5603| DATA
  C38| UCS2603| DATA

• RGB order: O-1 – O-6 indicate six order (RGB, RBG, GRB, GBR, BRG, BGR).

• Pixel length: Range is 008-900.

• Automatic blank screen: enable (“bon”) or disable(“boF”) automatic blank screen.

DMX decode mode
There are two DMX decode modes selectable.
DMX decode mode1: change light color by setting DMX decode address ;
DMX decode mod 2: switch light dynamic modes, control brightness and dynamic mode speed via 3 different DMX decode addresses.
Long press M, ◀ and ▶ key at the same time to switch DMX decode mode (display”d-1″ ) and DMX decode mode (display”d-2″ ).
Long press M key for 2s, and then return to DMX address interface.

• mode 1:

• Short press M key, when display 001-512, enter DMX decode mode.

• Press ◀ or ▶ key to change DMX decode start address(001-512), long press for fast adjustment.

• Long press M key for 2s, prepare for setup decode number and multiple of pixels.
  Short press M key to switch two item.
  Press ◀ or ▶ key to setup value of each item.
  Decode number(display “dno”) : DMX decode channel number, range is 003-600(for RGB).
  Multiple of pixels(display “Pno”) : Each 3 DMX channel control length(for RGB), range is 001- pixel length.
  Long press M key for 2s, or timeout 10s, quit setting.

• If there is a DMX signal input, will enter DMX decode mode automatically.

For example, the DMX-SPI decoder connect with RGB strip:
DMX data from DMX512 console:DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 1):DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 3):

• mode 2:

• Short press M key, when display 001-512, Press ◀ or ▶ key to change DMX decode start address(001-512), long press for fast adjustment.
  For example, when the DMX start address is set to 001. The address 1 of DMX console is for dynamic light type setting (32 modes), address 2 is for brightness setting (10  levels), address 3 is for speed setting (10 levels).
  Long press M key for 2s, or timeout 10s, quit setting.

• Address 1 of DMX console : dynamic light mode
  1: 0-8
  2: 9-16
  3: 17-24
  4: 25-32
  5: 33-40
  6: 41-48
  7: 49-56
  8: 57-64| 9: 65-72
  10: 73-80
  11: 81-88
  12: 89-96
  13: 97-104
  14: 105-112
  15: 113-120
  16: 121-128| 17: 129-136
  18: 137-144
  19: 145-152
  20: 153-160
  21: 161-168
  22: 169-176
  23: 177-184
  24: 185-192| 25: 193-200
  26: 201-208
  27: 209-216
  28: 217-224
  29: 225-232
  30: 233-240
  31: 241-248
  32: 249-255
  ---|---|---|---

• Address 2 of DMX console : Brightness (when address 2<5, turn off the light)
  1: 5-25 (10%)
  2: 26-50 (20%)
  3: 51-75(30%)
  4: 76-100(40%)
  5: 101-125(50%)| 6: 126-150(60%)
  7: 151-175(70%)
  8: 176-200(80%)
  9: 201-225(90%)
  10: 226-255(100%)
  ---|---

• Address 3 of DMX console : Speed
  1: 0-25(10%)
  2: 26-50(20%)
  3: 51-75(30%)
  4: 76-100(40%)
  5: 101-125(50%)| 6: 126-150(60%)
  7: 151-175(70%)
  8: 176-200(80%)
  9: 201-225(90%)
  10: 226-255(100%)
  ---|---

Stand-alone mode

• Short press M key, when display P01-P32, enter stand-alone mode.

• Press ◀ or ▶ key to change dynamic mode number(P01-P32).

• Each mode can adjust speed and brightness.
  Long press M key for 2s, prepare for setup mode speed and brightness.
  Short press M key to switch two item.
  Press ◀ or ▶ key to setup value of each item.
  Mode speed: 1-10 level speed(S-1, S-9, S-F).
  Mode brightness: 1-10 level brightness(b-1, b-9, b-F).
  Long press M key for 2s, or timeout 10s, quit setting.

• Enter stand-alone mode only when DMX signal is disconnected or lost.

Dynamic mode list

sectionally
P09| 7 color multi horse race close + on| P20| Red float| P31| 7 color jump sectionally
P10| 7 color scan close + open| P21| Green float| P32| 7 color strobe sectionally
P11| 7 color multi-scan close + open| P22| Blue float| |

Restore factory default parameter

• Long press ◀ and ▶ key, restore factory default parameter, display”RES”.
• Factory default parameter: DMX decode mode 1, DMX decode start address is 1, decode number is 510, multiple of pixels 1, dynamic mode number is 1, chip type is TM1809, RGB order, pixel length is 170, disable automatic blank screen, without matched RF remote.

RF mode
Match: Long press M and ▶ key for 2s, display “RLS”, within 5s, press on/off key of the RGB remote, display “RLO”, match is successful, then use the RF remote to change mode number, adjust speed or brightness.
Delete: Long press M and ▶ key for 5s, until display “RLE”, delete all matched RF remote.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>