AVARRO 0E-HDMIEX4KA HDMI Extender Over Single Utp User Manual
- June 8, 2024
- AVARRO
Table of Contents
0E-HDMIEX4KA HDMI Extender Over Single Utp
User Manual
MANUAL
HDMI EXTENDER OVER SINGLE UTP
0E-HDMIEX4KA
Introduction
Overview
This product is an HDBaseT Extender kit. It supports 4K@60 4:4:4 with HDR and
HDCP 2.2 compatibility, and offers the distribution of uncompressed UHD video,
audio, power, and IR together up to 40m/131ft over a single Cat 6a/7 cable. It
also supports bi-directional IR pass-through and bi-directional RS232
passthrough. By the DIP switch of Audio Output on the receiver, it’s able
toconfigure the ARC channelfeed by TV (with ARC support), or auxiliary
S/PDIF Input port. This suit also provides an HDMI audio de-embedding with
phoenix analog connecter. Its proprietary two-way PoC technology, with LED
indication for visual power supply to units and signal status to show
established connection between connected devices.
Features
- 4K/UHD capability @60 Hz with 4:4:4 Chroma sampling, plus support for HDR formats.
- HDCP 2.2 compatibility.
- Supports HD signal transmission up to 60 meters (1080P) and 35 meters (4K@60Hz YUV 4:4:4) via a single Cat 5e/6 cable.
- Supports HD signal transmission up to 70 meters (1080P) and 40 meters (4K@60Hz YUV 4:4:4) via a single Cat 6a/7 cable.
- Visual Lossless Compression enables 4K@60 HDR extension over HDBaseT.
- Receiver to transmitter audio return via ARC or digital coax pathway.
- HDMI audio de-embedding with phoenix analog connecter.
- Extends RS232, IR control signals.
- Support nonstandard bi-directional PoC power supply.
- Automatic EDID management.
- Visual LEDs indication.
Package Contents
Before you start the installation of the product, please check the package contents:
- 1 x 0E-HDMIEX4KA Transmitter
- 1 x 0E-HDMIEX4KA Receiver
- 1 x DC 12V Power Adapter with US Pins
- 1 x IR Emitter
- 1 x Broadband IR Receiver (30-50KHz)
- 2 x Phoenix Male Connecter (3.5mm 3-Pin)
- 4 x Mounting Brackets
- 1 x User Manual
Panel
Transmitter
Front Panel
No.
| Name|
Description
---|---|---
1| POWER
LED
| ON: The transmitter is powered on.
OFF: The transmitter is powered off.
2| STATUS LED| FLASHING SLOWLY: The transmitter is working properly.
OFF: The transmitter is not working properly.
3| HDCP LED| ON: HDCP protected content is being transmitted.
FLASHING QUICKLY: Non-HDCP protected content is being transmitted.
OFF: No content is being transmitted.
4| LINK LED| ON : HDBT link is normal.
OFF: No HDBT link or link error.
5| AUDIO OUT| HDMI audio de-embedding, connect to audio system like AV
receiver.
Rear Panel 
No.| Name|
Description
---|---|---
1| DC 12V| Connect to the power adapter provided. With bi- directional PoC
supported, one power adapter is needed to be connected to transmitter or
receiver to power both units.
2| HDBT OUT| Connect to HDBT IN port of receiver.
3| IR IN| Connect to IR receiver.
4| IR OUT| Connect to IR emitter.
5| RS232| Connect to a RS232 enabled device for RS232 Passing Through.
6| HDMI IN| Connect to an HDMI source.
7| S/PDIF OUT| Connect to audio system like AV receiver.
Receiver
Front Panel 
No.| Name|
Description
---|---|---
1| POWER LED| ON: The receiver is powered on.
OFF: The receiver is powered off.
2| STATUS LED| FLASHING SLOWLY: The receiver is working properly.
OFF: The receiver is not working properly.
3| HDCP LED| ON: HDCP protected content is being transmitted.
Flashing Quickly: Non-HDCP protected content is being transmitted.
OFF: No content is being transmitted.
4| LINK LED| ON : HDBT link is normal.
OFF: No HDBT link or link error.
5| AUDIO CONTROL| ARC , configure ARC channel feed by TV
S/PDIF IN , configure auxiliary S/PDIF input, pass optical audio from RX
to TX unit
---|---|---
Rear Panel 
No.
| Name|
Description
---|---|---
1| DC 12V| Connect to the power adapter provided. With bi- directional PoC
supported, one power adapter is needed to be connected to transmitter or
receiver to power both units.
2| HDBT IN| Connect to HDBT OUT port of transmitter.
3| IR IN| Connect to IR receiver.
4| IR OUT| Connect to IR emitter.
5| RS232| Connect to control system for RS232 Passing Through.
6| HDMI OUT| Connect to an HDMI display.
7| S/PDIF IN| Connect to an audio source device on S/PDIF IN mode.
Specification
Technical
Input/Output Port| Transmitter: 1 x HDMI IN, 1 x HDBT OUT, 1 x AUDIO OUT
(3-Pin Phoenix Connecter), 1 x IR IN, 1 x IR OUT, 1 x S/PDIF OUT, 1 x RS232, 1
x DC 12V IN Receiver: 1 x HDBT IN, 1 x HDMI OUT, 1 x IR IN, 1 x IR OUT, 1
x RS232, 1 x S/PDIF IN, 1 x DC 12V IN
Input/Output Signal Type| HDMI with 4K@60Hz, 4:4:4 8bit, HDCP 2.2
Input/Output Resolution Supported| 800×6008, 1024×7688, 1280×7688, 1280×8008,
1280×9608, 1280×10248, 1360×7688, 1366×7688, 1440×9008, 1600×9008, 1600×12008,
1680×10508, 1920×10808, 1920×12008, 3840×21602,3,5,6,8, 4096×21602,3,5,6,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6
= at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
Technical
Audio Format Supported| HDMI: Fully supports audio formats in HDMI 2.0
specification, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio,
DTS:X
S/PDIF: PCM 2.0, Dolby Digital, DTS 5.1
Maximum Data Rate| 18Gbps
Maximum Pixel Clock| 600MHz
General
Operating Temperature| 0°C to 45°C (32°F to 113°F)
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, non-condensing
ESD Protection| ±8kV (Air-gap discharge)/ ±4kV (Contact discharge)
Surge Protection| Voltage: ±1 kV
Power Consumption (Max)| Receiver is powered by transmitter: 18.72W
Transmitter is powered by receiver: 18.96W
Transmitter and receiver are powered separately:
Transmitter: 8.4W
Receiver: 6.6W
Device Dimension (W x H x D)| Transmitter/Receiver: 19.5cm x 2.1cm x
9.48cm/7.68” x 0.83’’ x 3.73”
Product Weight| Transmitter/Receiver: 0.4kg/0.88lb
Transmission Distance
Note: We recommend the use of T568B straight-through category cables
Cable Type| Range|
Supported Video
---|---|---
Cat 5e/6| 35m/115ft| 4K@60Hz 4:4:4
60m/197ft| 1080P@60Hz
Cat 6a/7| 40m/131ft| 4K@60Hz 4:4:4
70m/230ft| 1080P@60Hz
HDMI| Input/Output: 15m/49ft| 1080p@60Hz
Input/Output: 10m/33ft| 4K@30Hz 4:4:4
Input/Output: 5m/16ft| 4K@60Hz 4:4:4
Installation and Wiring
Brackets Installation
Note: Before installation, please ensure the device is disconnected from
the power source.
Steps to install the device in a suitable location:
- Remove the four screws that secure the side panels to the transmitter.
- Position and install the mounting brackets with the four mounting screws provided.
Mount and secure the transmitter to a surface or a suitable location with the mounting screws (provided by others).- Repeat steps from 1 to 3 to install the receiver.
Wiring
Warnings:
- Before wiring, disconnect the power from the device.
- During wiring, connect and disconnect the cables gently.
ARC Mode:
Note: When you want to configure ARC channel feed by TV:
Ensure AV System and TV support ARC function and CEC should be enabled.
- Switch the DIP switch on front panel of the receiver to ARC mode.
- Connect an AV System to HDMI IN port of the transmitter.
- Connect HDMI IN ports with ARC function supported of a TV to HDMI OUT port of the receiver.
- Connect HDBT OUT of the transmitter to HDBT IN port of the receiver.
- Set CEC function of TV to on.
- Switch the AV System to ARC channel.
- Connect the provided power adapter to the transmitter or receiver.
- Power on all attached devices. The audio signal of TV through HDMI OUT port will be transmitted to the AV System connected to HDMI IN Port of transmitter. (See Figure 1)
S/PDIF Pass-through Mode
-
Switch the DIP switch on front panel of the receiver to S/PDIF IN mode.
-
Connect an audio receiver to the S/PDIF OUT port of transmitter.
-
Connect an audio source to S/PDIF IN port of receiver.
-
Connect HDBT OUT port of the transmitter to HDBT IN port of the receiver.
-
Connect the provided power adapter to the transmitter or receiver.
-
Power on all attached devices. Audio signal from S/PDIF IN port will be transmitted to S/PDIF OUT port. (See Figure 2)
Figure 1 Switch Audio Control to “ARC” Mode
Figure 2 Switch Audio Control to “S/PDIF IN” Mode
For additional wiring:
- Bi-directional IR pass-through: Connect the provided IR receiver to IR IN port of the transmitter/receiver, and connect the provided IR emitter to IR OUT port of the receiver/transmitter. You can control the HDMI source at receiver side or control the display at transmitter side. (See Figure 2)
- Bi-directional RS232 pass-through: Connect RS232 enabled devices such as PC to RS232 ports of the transmitter and receiver. (See “RS232 PassThrough” section)
RS232 Pass-Through
According to the bi-direction RS232 pass through function, you can use two RS232 control systems for serial communication by connecting to the devices via serial cables in order to control the source device or the display.
Limited Warranty
1. Limited Warranty
a. General
Subject to the terms and conditions of this Limited Warranty, from the date of
sale through the period of time for product categories specified in Section
1(b), ADI warrants AVARRO branded products to be free from defects in
materials and workmanship under normal use and service, normal wear and tear
excepted. Except as required by law, this Limited Warranty is only made to
Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) The product is installed outside of stated operating parameters, altered,
or improperly services or repaired;
(iii) Damage is caused by outside natural occurrences, such as lightning,
power surges, fire, floods, acts of nature, or the like.
(iv) Defects resulting from unauthorized modification, misuse, vandalism, or
other causes unrelated to defective materials or workmanship, or failures
related to batteries of any type used in connection with the products sold
hereunder.
ADI only warrants those products branded AVARRO and sold by ADI. Any other
products branded by third parties are warranted by the third party
manufacturer for a period as defined by the third party manufacturer, and ADI
assigns to Buyer those warranties and only those warranties extended by such
third party manufacturers or vendors for non-ADI branded products. ADI does
not itself warrant any non-ADI branded product and sells only on an as is
basis in accordance with ADI’s terms and conditions of sale.
b. Specific Warranties for product categories are as follows:
| Product Categories | Warranty Period |
|---|---|
| HDMI Distribution | 2 years |
2. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY THERE ARE NO WARRANTIES
OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE
FACE
HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE
TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR
FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR
UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS
CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description (whether in
writing or made orally by ADI or ADI’s agents), specifications, samples,
models, bulletin, drawings, diagrams, engineering sheets, or similar materials
used in connection with the Buyer’s order are for the sole purpose of
identifying ADI’s products and shall not be
construed as an express warranty or condition. Any suggestions by ADI or ADI’s
agents regarding use, applications or suitability of the products shall not be
construed as an express warranty or condition unless confirmed to be such in
writing by ADI. ADI does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent any personal
injury or property loss by burglary, robbery, fire or otherwise, or that the
products will in all cases provide adequate warning or protection. Buyer
understands and will cause its customer to understand that a properly
installed and maintained product is not insurance or guarantee that such will
not cause or lead to personal injury or property loss. CONSEQUENTLY, ADI SHALL
HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED
ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING.
However, if ADI is held liable whether directly or indirectly for any loss or
damage with respect to the products it sells, regardless of cause or origin,
its maximum liability shall not in any case exceed the purchase price of the
product, which shall be fixed as liquidated damages and not as a penalty and
shall be the complete and exclusive remedy against ADI.
3. Limitation on Liability to Buyer’s Customers.
Buyer agrees to limit liability to its customers to the fullest extent
permitted by law. Buyer acknowledges that ADI shall only be deemed to give
consumers of its products such statutory warranties as may be required by law
and at no time shall Buyer represent to its customers and/or users of ADI
products that ADI provides any additional warranties. By accepting the
products, to the fullest extent permitted by law, Buyer assumes all liability
for, and agrees to indemnity and hold ADI harmless against and defend ADI
from, any and all suits, claims, demands, causes of action and judgments
relating to damages, whether for personal injury or to personal property,
suffered by any person, firm, corporation or business association, including
but not limited to, Buyer’s customers and/or users of the products because of
any failure of the products to detect and/or
warn of the danger for which the goods were designed or any other failure of
the products whether or not such damages are caused or contributed to by the
sold or joint concurring negligence or fault of ADI.
4. Returns
Subject to the terms and conditions listed below, during the applicable
warranty period, ADI will replace Product or provide a credit at purchase at
its sole option free of charge any defective products returned prepaid. Any
obligations of ADI to replace Limited Lifetime warranty products pursuant to
this warranty which result from defect are limited to the availability of
replacement product. ADI reserves the right to replace any such products with
the then currently available products, or provide a credit in its sole
discretion. In the event Buyer has a problem with any ADI product, please call
your local ADI branch for return instructions:
For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830
Be sure to have the model number and the nature of the problem available. In
the event of replacement, the return product will be credited to Buyer’s
account and a new invoice issued for the replacement item. ADI reserves the
right to issue a credit only in lieu of replacement.
If any AVARRO branded products are found to be in good working order or such
product’s inability to function properly is a result of user damage or abuse,
the product will be returned to Buyer in the same condition as received and
Buyer shall be responsible for any return freight changes.
5. Governing Law
The laws of State of New York apply to this Limited Warranty.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall
be null and void, but the remainder of the Limited Warranty shall remain in
full force and effect.
For more information please call
1-833-574-9124
email [email protected] ···
To learn more about AVARRO products visit
avarro.adiglobaldistribution.us