OKP ROBOTICS K7 Series Robotic Vacuum Cleaner K7 User Manual

OKP ROBOTICS K7 Series Robotic Vacuum Cleaner K7

Congratulations on the purchase of your OKP ROBOTICS!
We hope it brings you many years of satisfaction. We trust thepurchaseofyour new robot will help keep your home clean and provide youmorequalitytime to do other things. Wisdom Inspired Freedom
Should you encounter situations that have not been properly addressedinthis Instruction Manual, please contact our Customer Service Center wherea technician can address your specifi c problem or question. For more information, please visit the OKP ROBOTICS official website: www.okptlife.com or send email to support@okplife.com The Company reserves the right to make technological and/ or designchangesto this product for continuous Improvement.

Maintance

Dust Bin and Filters
When cleaning and maintaining the robot and its accessories, turn off the robot and unplug the Charging dock.

1. Remove the dustbin, open the dustbin cover, and empty the Dust Bin.
2. Remove dust filter. HEPA is not recommended for washing. Pat the High Eff iciency Filter clean.
3. Flush the Dustbin and the filter net.
4. Dry the Sponge filter, Dust Bin and Filter Net completely before reinstalling.

Roller Brush and Side Brushes

1. Cleaning Roller Brush
   Turn the robot over. Push both buttons on the Roller Brush Cover and remove it. Remove the Roller Brush.Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Roller Brush.

2. Cleaning the Side Brushes
   Remove the Side Brushes. Wipe the Side Brushes and their slots with a dry cloth.

3. Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Universal Wheel.

4. Clean the driving wheel to maintain it’s effectiveness.

Other Components

• Clean the anti-collision sensor panel.
• Wipe the Anti-Drop Sensors with the brush or the felt side of the Multi-Function Cleaning Tool to maintain their effectiveness.
• Wipe the Charging Contacts and Charging Dock Pins with the brush of the Multi-Function Cleaning Tool or a dry clean cloth to maintain their effectiveness.

*If you do not use this product for a long time, please take out the battery and keep it properly. If the battery leaks, remove the battery, And wipe the battery cell clean. This product has a Long life battery and does not need to be replaced frequently. If you need to replace it, you can contact our after- sales service for replacement.

Indicator Light

Lighting Effects

networking status
Low Battery| Red light is always on| As per current networking status
Cleaning Mode| Blue light is always on| As per current networking status
Before starting distribution network| Blue light is always on| Blue light flashes
Distribution process/

Loss of signal reconnection

| Blue light is always on| Exit the distribution network after 5

minutes, the blue light is off

Connect to Wi- Fi| Blue light is always on| Blue light is always on

Common alarm tips
When the robot failure, the Start/Pause button light flashes in red and the buzzer sounds of different lengths will be emitted. Refer to the following table to check the cause of the fault:

Tips if the above method does not solve the problem, please try the following: re- open the power switch on the side of the robot to restart the machine.

Troubleshooting

Please use this chart to troubleshoot common problems using robot.

sure the WIFI name and the password are entered correctly.
Make sure the robot is less than 5 feet(0.5 meter)away from the router and your phone – the closer the better!| Ensure the robot is under WIFI signal coverage.
Robot isn’ t in network pairing mode.| Make sure the robot is in the network pairing mode.
Didn’ t connect to 2. 4 G Wi- Fi signal.| The robot doesn’t connect compatible with 5G WiFi signal, Please connect to 2.4G WiFi signal.
Download the incorrect APP| Please scan the QR code in the user manual or search “ OKP life” on google play or app store.
02| The robot is too noisy.| Side brush, rolling brush,entangled, dustbin Filter material blocked, etc.| It is recommended to clean and maintain the brush, roller brush,dustbin and filters regularly.
The robot is in MAX suction power mode.| Change the suction power mode to Medium or Low.
NO| Malfunction| Possible Causes| Solutions
---|---|---|---
03|

Robot will not Charge.

| Robot has not made a connection with the Charging Dock.| Be sure that robot’ s Charging Contacts have made a connection with the Charging Dock Pins.
Charging Dock is unplugged while robot is powered ON, which causes battery. consumption.| Plug in the Charging Dock and ensure robot is powered ON. Keep robot on the Charging Dock to make sure it has a full battery to work at any time.
04| Robot gets into trouble while working and stops.| The robot is entangled or obstructed by scattered wires on the ground, drape curtains or carpet edges.| Robot will try various ways to get itself out of trouble. If it is unsuccessful, manually remove the obstacles and restart.
Side Brush is stuck or the rotation speed of the Side Brush decreases.| Remove the debris tangled around the Side Brush. If the Side Brush still rotates slowly, contact Customer Service.
Roller Brush is stuck or the rotation speed of the Roller brush decreases.| Remove the debris tangled around the roller Brush with the provided Multi- Function Cleaning Tool. If the Roller Brush still rotates slowly, contact Customer Service.
05| Robot returns to the Charging Dock before it finishes cleaning.| When battery power gets low, robot automatically switches to Return to Charger Mode and returns to the Charging Dock to recharge itself.| This is normal. No solution necessary.
Working time varies according to floor surface,room complexity and the selected Cleaning Mode.| This is normal. No solution necessary.
06| Robot will not clean automatically at scheduled time.| Time Scheduling function is cancelled.| Turn on the power switch of the robot, reconnect the network and use the APP to check the scheduled settings.
Robot is powered OFF( once the robot is power off, the time scheduling settings via remote control will be removed).| Power on the robot and make the schedule using the remote control over again.
The robot’ s battery is low.| Keep robot powered ON and on the Charging Dock to make sure it has a full battery to work at any time.
The robot’ s components are tangled with debris.| Power OFF robot, clean the Dust Bin, and invert the robot. Clean Side Brushes and the Roller Brush as described in section 4.
07| Remote Control failure( effective control range of Remote Control is 5m (16’).| The batteries in the Remote Control need to be replaced.| Replace the battery with a new one and install it properly.
Robot is powered OFF or robot’s battery is low.| Make sure robot is powered ON and fully charged.
The infrared signal cannot be transmitted because the Infrared Emitter on the Remote Control or robot’ s Infrared Receiver on robot is dirty.| Use a dry cloth or the Multi-Function Cleaning Tool to wipe the Infrared Emitter on Remote Control and the Infrared Receiver on robot.
There is other equipment interfering with the infrared signal to robot.| Avoid using the Remote Control near other equipment using infrared signals.

If the trouble cannot be eliminated according to the above operation, Please contact support@okplife.com
The images are only for reference, please refer to the actual item as the standard. OKP reserves the right to update products without prior notice.

Technical paremeter

Output:DC 19V;0,6A;Class II;

Okp Technologies Corp
http://www.okplife.com
support@okplife.com
Part of the eastern section,level 4 Building 3, Longcheng Industrial Park, Huanggekeng Community, Longcheng Street, Longgang District, Shenzhen

References

• OKP Robot Vacuum – Leading the Future of Home Cleaning – okplife

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>