AVARRO 0E-HDMISP2 2-Ports HDMI Splitter User Manual

: June 8, 2024
: AVARRO

Table of Contents

Introduction
Features
Package Contents
Installation and Wiring
Wiring
Troubleshooting
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

0E-HDMISP2 2-Ports HDMI Splitter
User Manual

Introduction

Overview

The 0E-HDMISP2 is a 1 x 2 HDMI splitter with scaler, reliably distributes one HDMI input signal to two outputs at resolutions up to 4K@60Hz 4:4:4 chroma subsampling. It follows HDCP 2.2 and HDMI 2.0b specifications, including supported data rates up to 18 Gbps, HDR (high dynamic range), 3D and HD lossless audio formats. With the built-in scaler, when connected to two different displays, the corresponding HDMI output is capable of scaling down automatically (down to 1080P) to feed an optimal output signal to its attached display.
The splitter provides HDCP management which continuously authenticates HDCP encryption between all devices, ensuring correct source content is output to each display. It also features automatic input cable equalization, actively conditions input HDMI signals to compensate for signal loss when using long cables or cascading multiple units.

Features

Distributes one HDMI input signal to two HDMI displays
Supports HDMI 2.0b Specifications, including:
Data rates up to 18.0 Gbps
- 3D
- DR
- HD lossless audio formats
- HDCP 2.2 compliant
Each HDMI output supports scaling down to 1080P individually (fps will not change during scaling down from 4K to 1080P)
ont panel LED indication for I/O and Power connectivity
Automatic input cable equalization for signal regeneration compensation

Package Contents

Before you start the installatio of the product, please check the package contents:

1 x 0E-HDMISP2 Splitter
1 x DC 5V Power Adapter with US Pins
2 x Mounting Brackets
1 x User Manual

ID.	Name	Description
1	DC 5V	Connect the power supply provided.
2&4	HDMI OUT (1-2)	Connect to the HDMI display using an HDMI cable.
3	HDMI IN	Connect to the HDMI source using an HDMI cable.

Technical

Input/Output Signal Type| HDMI with 4K@60Hz 4:4:4, HDCP 2.2, HDR, 3D, Scaler
Input/Output Resolution Supported| VESA:
800×6008, 1024×7688, 1280×7688, 1280×8008,
1280×9608, 1280×10248, 1360×7688,
1366×7688, 1440×9008, 1600×9008,
1600×12008, 1680×10508, 1920×12008
SMPTE:
720x480P7,8, 720x576P6, 1280x720P6,7,8,
1920x1080P6,7,8, 3840x2160P2,3,5,6,8,
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 7 = at 59.94 Hz, 8 = 60 Hz
** Audio Format| Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X
Maximum Data Rate| 18Gbps
HDR Format Supported| HDR 10
Cable Type| Range| Supported Video
---|---|---
** HDMI| Input/Output: 15m/50ft| 1080P@60Hz
Input:10m/33ft Output: 15m/50ft| 4K@30Hz
Input/Output: 5m/16ft| 4K@60Hz

Installation and Wiring

Brackets Installation Note: Before installation, please ensure the device is disconnected from the power source.
In order to keep elegant appearance, we design to share screws wit the product chassis, please refer to the below steps to install.

Steps to install the device in a suitable location:

Remove the screws that secure the side panel to the device.
The bracket is attached to the enclosure as shown.
Repeat steps1-2 for the other side of the unit.
Attach the brackets to the surface you want to hold the device against using the screws (provided by others).

Wiring

Warnings:

Before wiring, disconnect the power from the device.
During wiring, connect and disconnect the cables gently.

Steps for device installation:

Connect an HDMI source (such as Blu-ray player, games console, STB, Apple TV etc.) to the HDMI IN port of the splitter via an HDMI cable.
Connect HDMI displays to HDMI OUT.
Connect the power adapter provided to the unit.
Power on all attached devices.

When all is set, check if all LED indicators on the 0E-HDMISP2 are normal to ensure installation is successful. For LED indication, please refer to Panel section.

Troubleshooting

Most problems that occur are due to simple issues. If you have trouble, please check the list of simple fixes below.

No Power
• Ensure the power is on.
• Ensure you use the power adapter provided in the package.
No Picture or Video Flash
• Ensure all devices are on, and all cables are qualified and connected properly. Ensure all the cables’ length are within the maximum distance (refer to Specification table).
• Ensure all the LED indicators are normal.
• When connecting source to display directly, ensure them can work properly.
• Ensure the input resolution is supported by the device.
• Ensure the input resolution is within 4K@30Hz when Dolby vision signal is input.
HDR Video Not Supported Ensure the source and all displays support HDR. If any display doesn’t support HDR, all outputs will not support HDR video.
Surround Audio Not Supported Ensure the source and all displays support surround. If one display supports stereo only, all displays will output stereo audio.

Limited Warranty

Limited Warranty
a. General
Subject to the terms and conditions of this Limited Warranty, from the date of sale through the period of time for product categories specified in Section 1(b), ADI warrants AVARRO branded products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted. Except as required by law, this Limited Warranty is only made to Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) The product is installed outside of stated operating parameters, altered, or improperly services or repaired;
(iii) Damage is caused by outside natural occurrences, such as lightning, power surges, fire, floods, acts of nature, or the like.
(iv) Defects resulting from unauthorized modification, misuse, vandalism, or other causes unrelated to defective materials or workmanship, or failures
related to batteries of any type used in connection with the products sold hereunder.
ADI only warrants those products branded AVARRO and sold by ADI. Any other products branded by third parties are warranted by the third-party manufacturer for a period as defined by the third-party manufacturer, and ADI assigns to Buyer those warranties and only those warranties extended by such third-party manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.
b. Specific Warranties for product categories are as follows: Product Categories| Warranty Period
---|---
HDMI Distribution| 2 years
EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description (whether in writing or made orally by ADI or ADI’s agents), specifications, samples, models, bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection with the Buyer’s order are for the sole purpose of identifying ADI’s products and shall not be construed as an express warranty or condition. Any suggestions by ADI or ADI’s agents regarding use, applications or suitability of the products shall not be construed as an express warranty or condition unless confirmed to be such in writing by ADI. ADI does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases provide adequate warning or protection. Buyer understands and will cause its customer to understand that a properly installed and maintained product is not insurance or guarantee that such will not cause or lead to personal injury or property loss. CONSEQUENTLY, ADI SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING. However, if ADI is held liable whether directly or indirectly for any loss or damage with respect to the products it sells, regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price of the product, which shall be fixed as liquidated damages and not as a penalty and shall be the complete and exclusive remedy against ADI.
Limitation on Liability to Buyer’s Customers. Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer acknowledges that ADI shall only be deemed to give consumers of its products such statutory warranties as may be required by law and at no time shall Buyer represent to its customers and/or users of ADI products that ADI provides any additional warranties. By accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnity and hold ADI harmless against and defend ADI from, any and all suits, claims, demands, causes of action and judgments relating to damages, whether for personal injury or to personal property, suffered by any person, firm, corporation or business association, including but not limited to, Buyer’s customers and/or users of the products because of any failure of the products to detect and/or warn of the danger for which the goods were designed or any other failure of the products whether or not such damages are caused or contributed to by the sold or joint concurring negligence or fault of ADI.
Returns Subject to the terms and conditions listed below, during the applicable warranty period, ADI will replace Product or provide a credit at purchase at its sole option free of charge any defective products returned prepaid. Any obligations of ADI to replace Limited Lifetime warranty products pursuant to this warranty which result from defect are limited to the availability of replacement product. ADI reserves the right to replace any such products with the then currently available products, or provide a credit in its sole discretion. In the event Buyer has a problem with any ADI product, please call your local ADI branch for return instructions:
For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830
Be sure to have the model number and the nature of the problem available. In the event of replacement, the return product will be credited to Buyer’s account and a new invoice issued for the replacement item. ADI reserves the right to issue a credit only in lieu of replacement.
If any AVARRO branded products are found to be in good working order or such product’s inability to function properly is a result of user damage or abuse, the product will be returned to Buyer in the same condition as received and Buyer shall be responsible for any return freight changes.
overning Law
The laws of State of New York apply to this Limited Warranty.
Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect.