AVARRO NX-FM2460 Fixed Medium TV Mount User Manual

**AVARRO NX-FM2460 Fixed Medium TV Mount

**

Features

• Fits 24″- 60″ TVs up to 120 lbs.
• VESA 100 x 100 to 400 x 400 (W x H) (mm)
• Locking mechanism secures rails to wall plate (pad lock optional)
• Post installation leveling

CAUTION: DO NOT EXCEED MAXI-MUM WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!Max Loading
Weight: 120 lbs

TOOLS NEEDED

SYMBOLS

• Drill

• Level

• Socket Wrench

• Caution

• Tighten

• Pencil Mark

• Screwdriver

• Heavy!

HARDWARE PRODUCT NUMBERS

PRODUCT COMPONENT PARTS

Flat Panel Mounting Pattern (W x H)

• Minimum: 100mm x 100mm
• Maximum: 700mm x 450mm

Contents

A| 1| Wall Plate
B| 2| Vertical Rails
C| 2| Locking Mechanism
D| 1| Pendant
15| 1| Bubble Level

STEP 1A – FLAT BACK FLAT PANEL (UNIVERSAL VERTICAL RAILS)

Connect Vertical Rails to flat panel

STEP 1B – CURVED BACK FLAT PANEL (UNIVERSAL VERTICAL RAILS)

Connect Vertical Rails to flat panel

Spacers can also be used to provide clearance for cables and connectors.

STEP 1- USE M8 STEEL WASHER IF THE PHILLIPS SCREWS FROM THE MONITOR KIT

ARE TOO LONG

Diagrams show two options for using additional washers if hardware screws are too long to properly tighten into back of flat panel television.

Select the proper spacers or spacer suit as below if necessary

STEP 2- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 3)

Find stud and mark edge and center locations

STEP 2A & 2B- LOCATE WOOD STUDS AND DRILL PILOT HOLES

Drill pilot hole

• Mark center of wood using stud finder and pencil, use wall plate to level and mark pilot holes.
  

• Drill 4 pilot holes
  

STEP 2C- MOUNT WALL PLATE TO WALL

Mount wall plate

STEP 3 – SOLID CONCRETE INSTALLATION

Use wall plate to mark mounting locations/ drill pilot holes

STEP 3A & 3B – POSITION WALL PLATE, MARK, & DRILL PILOT HOLES

• Position wall plate to desired location, level, and mark pilot locations with pencil.
  

• Drill 4 pilot holes
  

STEP 3C- SOLID CONCRETE INSTALLATION

Insert wall Anchors gently into concrete wall with hammer if necessary

STEP 4A- ATTACH PANELTO WALL PLATE

Hang vertical rails with monitor attached

STEP 4B- ADJUST THE SCREWS ON THE VERTICAILS TO LEVEL THE FLAT PANEL

STEP 4C- ADDITIONAL SECURITY FEATURE (OPTIONAL)

Vertical Rails have 7mm hole located at the bottom for placement of pad lock for additional theft) security (pad lock not included)

STEP 4D – ADJUST STRAP LENGTH (OPTIONAL)

Limited Warranty

General

Subject to the terms and conditions of this Limited Warranty, from the date of sale through the period of time for product categories specified in Section 1(b), ADI warrants AVARRO branded products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted. Except as required by law, this Limited Warranty is only made to Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:

1. The product is improperly installed, applied or maintained;
2. The product is installed outside of stated operating parameters, altered, or improperly services or repaired;
3. Damage is caused by outside natural occurrences, such as lightning, power surges, fire, floods, acts of nature, or the like.
4. Defects resulting from unauthorized modification, misuse, vandalism, or other causes unrelated to defective materials or workmanship, or failures related to batteries of any type used in connection with the products sold hereunder.

ADI only warrants those products branded AVARRO and sold by ADI. Any other products branded by third parties are warranted by the third party manufacturer for a period as defined by the third party manufacturer, and ADI assigns to Buyer those warranties and only those warranties extended by such third party manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.

Specific Warranties for product categories are as follows:

EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY

THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description (whether in writing or made orally by ADI or ADI’s agents), specifications, samples, models, bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection with the Buyer’s order are for the sole purpose of identifying ADI’s products and shall not be construed as an express warranty or condition. Any suggestions by ADI or ADI’s agents regarding use, applications or suitability of the products shall not be construed as an express warranty or condition unless confirmed to be such in writing by ADI. ADI does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases provide adequate warning or protection. Buyer understands and will cause its customer to understand that a properly installed and maintained product is not insurance or guarantee that such will not cause or lead to personal injury or property loss. CONSEQUENTLY ADI SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING.

However, if ADI is held liable whether directly or indirectly for any loss or damage with respect to the products it sells, regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price of the product, which shall be fixed as liquidated damages and not as a penalty and shall be the complete and exclusive remedy against ADI.

Limitation on Liability to Buyer’s Customers.

Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer acknowledges that ADI shall only be deemed to give consumers of its products such statutory warranties as may be required by law and at no time shall Buyer represent to its customers and/or users of ADI products that ADI provides any additional warranties. By accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnity and hold ADI harmless against and defend ADI from, any and all suits, claims, demands, causes of action and judgments relating to damages, whether for personal injury or to personal property, suffered by any person, firm, corporation or business association, including but not limited to, Buyer’s customers and/or users of the products because of any failure of the products to detect and/or warn of the danger for which the goods were designed or any other failure of the products whether or not such damages are caused or contributed to by the sold or joint concurring negligence or fault of ADI.

Returns

Subject to the terms and conditions listed below, during the applicable warranty period, ADI will replace Product or provide a credit at purchase at its sole option free of charge any defective products returned prepaid. Any obligations of ADI to replace Limited Lifetime warranty products pursuant to this warranty which result from defect are limited to the availability of replacement product. ADI reserves the right to replace any such products with the then currently available products, or provide a credit in its sole discretion.

In the event Buyer has a problem with any ADI product, please call your local ADI branch for return instructions:

For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830

Be sure to have the model number and the nature of the problem available. In the event of replacement, the return product will be credited to Buyer’s account and a new invoice issued for the replacement item. ADI reserves the right to issue a credit only in lieu of replacement.

If any AVARRO branded products are found to be in good working order or such product’s inability to function properly is a result of user damage or abuse, the product will be returned to Buyer in the same condition as received and Buyer shall be responsible for any return freight changes.

Governing Law

The laws of State of New York apply to this Limited Warranty.

Miscellaneous

Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect.

References

• AVARRO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>