AVARRO NX-CRS14U 14 Space Skeleton Rack Enclosure User Manual
- October 30, 2023
- AVARRO
Table of Contents
- TOOLS NEEDED
- SYMBOLS
- HARDWARE PRODUCT NUMBERS
- PRODUCT COMPONENT PARTS
- STEP 1 – INSTALL BRACKETS
- STEP 2- INSTALL FLAT BRACKETS TO FRAMES
- STEP 3 – ATTACH FOOT SCREWS
- OPTIONAL STEP- STACKING (SECOND RACK SOLD SEPARATELY)
- STEP 4A- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 4B)
- STEP 4A- SECURE LAG BOLTS
- STEP 5- HANG THE RACK TO THE LAG BOLTS AND TIGHTEN THE LAG BOLTS
- Limited Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MANUAL/MANUEL
14 Space Skeleton Rack Enclosure
NX-CRS14U
For more information please call 1-833-574-9124 or email
AVARRO@adiglobal.com
••• To learn more about AVARRO products visit
avarro.adiglobaldistribution.us
TOOLS NEEDED
SYMBOLS
HARDWARE PRODUCT NUMBERS
PRODUCT COMPONENT PARTS
Product Components
A1 | 1 | Left Frame |
---|---|---|
A2 | 1 | Right Frame |
B 2 | 2 | L Brackets |
C 2 | 2 | Flat Brackets |
STEP 1 – INSTALL BRACKETS
Fit L Bracket over left frame vertical screw stud.
Slide L Bracket over horizontal screw stud.
Secure L Bracket with Nylon Nuts.
Repeat Step 1 to secure Right L Bracket.
STEP 2- INSTALL FLAT BRACKETS TO FRAMES
STEP 3 – ATTACH FOOT SCREWS
Install Foot Screws. Make sure Foot Screws are screwed in until the Nylon Nuts at the top of the Foot Screws are flush against the frame.
OPTIONAL STEP- STACKING (SECOND RACK SOLD SEPARATELY)
Fit second frame (without Foot Screws) onto first one.
Secure frames with Phillips Screws
CAUTION:
****When stacking, ensure heavier equipment is placed at the bottom of the
rack(s) for stability.
STEP 4A- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 4B)
Find stud and mark edge and center locations
WOOD DRILL BIT NOT INCLUDED
STEP 4A – MARK PILOT HOLE LOCATIONS AND DRILL
STEP 4A- WOOD STUD INSTALLATION (CONCRETE INSTALLATION SKIP TO STEP 4B)
Find stud and mark edge and center locations
WOOD DRILL BIT NOT INCLUDED
STEP 4A- SECURE LAG BOLTS
STEP 4B – SOLID CONCRETE INSTALLATION
Use wall plate to mark mounting locations/ drill pilot holes
STEP 4B- MARK AND DRILL PILOT HOLES AND MOUNT RACK
STEP 4B- SECURE THE ANCHORS AND THE LAG BOLTS
STEP 5- HANG THE RACK TO THE LAG BOLTS AND TIGHTEN THE LAG BOLTS
Limited Warranty
a. General
Subject to the terms and conditions of this Limited Warranty, from the date of
sale through the period of time for product categories specified in Section
1(b), ADI warrants AVARRO branded products to be free from defects in
materials and workmanship under normal use and service, normal wear and tear
excepted. Except as required by law, this Limited Warranty is only made to
Buyer and may not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
- The product is improperly installed, applied or maintained;
- The product is installed outside of stated operating parameters, altered, or improperly services or repaired;
- Damage is caused by outside natural occurrences, such as lightning, power surges, fire, floods, acts of nature, or the like.
- Defects resulting from unauthorized modification, misuse, vandalism, or other causes unrelated to defective materials or workmanship, or failures related to batteries of any type used in connection with the products sold hereunder.
ADI only warrants those products branded AVARRO and sold by ADI. Any other products branded by third parties are warranted by the third party manufacturer for a period as defined by the third party manufacturer, and ADI assigns to Buyer those warranties and only those warranties extended by such third party manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.
b. Specific Warranties for product categories are as follows:
Product Categories | Warranty Period |
---|---|
Mounts | 5 years |
Rack 5 | 5 years |
EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY,
OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO
CASE SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY
TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION,
EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF
THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product
description (whether in writing or made orally by ADI or ADI’s agents),
specifications, samples, models, bulletin, drawings, diagrams, engineering
sheets, or similar materials used in connection with the Buyer’s order are for
the sole purpose of identifying ADI’s products and shall not be construed as
an express warranty or condition. Any suggestions by ADI or ADI’s agents
regarding use, applications or suitability of the products shall not be
construed as an express warranty or condition unless confirmed to be such in
writing by ADI. ADI does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent any personal
injury or property loss by burglary, robbery, fire or otherwise, or that the
products will in all cases provide adequate warning or protection. Buyer
understands and will cause its customer to understand that a properly
installed and maintained product is not insurance or guarantee that such will
not cause or lead to personal injury or property loss. CONSEQUENTLY ADI SHALL
HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED
ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE
WARNING.
However, if ADI is held liable whether directly or indirectly for any loss or
damage with respect to the products it sells, regardless of cause or origin,
its maximum liability shall not in any case exceed the purchase price of the
product, which shall be fixed as liquidated damages and not as a penalty and
shall be the complete and exclusive remedy against ADI.
Limitation on Liability to Buyer’s Customers.
Buyer agrees to limit liability to its customers to the fullest extent
permitted by law. Buyer acknowledges that ADI shall only be deemed to give
consumers of its products such statutory warranties as may be required by law
and at no time shall Buyer represent to its customers and/or users of ADI
products that ADI provides any additional warranties. By accepting the
products, to the fullest extent permitted by law, Buyer assumes all liability
for, and agrees to indemnity and hold ADI harmless against and defend ADI
from, any and all suits, claims, demands, causes of action and judgments
relating to damages, whether for personal injury or to personal property,
suffered by any person, firm, corporation or business association, including
but not limited to, Buyer’s customers and/or users of the products because of
any failure of the products to detect and/or warn of the danger for which the
goods were designed or any other failure of the products whether or not such
damages are caused or contributed to by the sold or joint concurring
negligence or fault of ADI.
Returns
Subject to the terms and conditions listed below, during the applicable
warranty period, ADI will replace Product or provide a credit at purchase at
its sole option free of charge any defective products returned prepaid. Any
obligations of ADI to replace Limited Lifetime warranty products pursuant to
this warranty which result from defect are limited to the availability of
replacement product. ADI reserves the right to replace any such products with
the then currently available products, or provide a credit in its sole
discretion. In the event Buyer has a problem with any ADI product, please call
your local ADI branch for return instructions:
For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830
Be sure to have the model number and the nature of the problem available. In
the event of replacement, the return product will be credited to Buyer’s
account and a new invoice issued for the replacement item. ADI reserves the
right to issue a credit only in lieu of replacement.
If any AVARRO branded products are found to be in good working order or such
product’s inability to function properly is a result of user damage or abuse,
the product will be returned to Buyer in the same condition as received and
Buyer shall be responsible for any return freight changes.
Governing Law
The laws of State of New York apply to this Limited Warranty.
Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it shall
be null and void, but the remainder of the Limited Warranty shall remain in
full force and effect.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>