AVARRO 0E-HDMISPL4 4 Ports HDMI Splitter User Manual

AVARRO 0E-HDMISPL4 4 Ports HDMI Splitter User Manual

Introduction

Overview
0E-HDMISPL4 is a 1 to 4 splitter for HDMI with Ultra HD 4K support. It reliably distributes one HDMI source signal to four HDMI outputs. It supports HDMI 1.4a specification features including data rates up to 10.2 Gbps, 3D, Lip Sync, and HD lossless Audio/Video formats. The splitter features HDCP management, which continuously authenticates HDCP encryption between all devices, ensuring the simultaneous distribution of source content to all outputs. The splitter ensures signal integrity by equalizing and regenerating the incoming signal. It is ideal for applications, such as offices, schools, conferences rooms, shopping malls, hotels, or museums, which require the distribution of an HDMI source signal to multiple outputs.

Features

• Slim appearance and space saving.
• HDMI 1.4a and HDCP compliant.
• Supports HD resolutions up to 3840 x 2160@30Hz.
• Distributes one HDMI source to four HDMI displays.
• Automatic input cable equalization and signal regeneration compensation.
• Supports automatic EDID management.
• Supports signal transmission distance up to 33 feet (10 meters) at 4K when used with standard HDMI cables.
• Reshapes marginal or noisy HDMI signals, ensuring a strong, stable digital signal.

Package Contents

Before you start the installation of the product, please check the package contents:

• 1 x 0E-HDMISPL4
• 1 x DC 5V Power Adapter
• 1 x User Manual

Panel

1

|

INPUT LED

| STEADY BLUE: When a source device is powered on and connected to the splitter. OFF: No source device is connected or it ispowered off.

2

|

OUTPUT (1~4) LED

| STEADY BLUE: When the HDMI displays are powered on and connected to corresponding numbered outputs 1~4. OFF: No HDMI display is connected or it is powered off.
3| POWER LED| STEADY BLUE: When the splitter is poweredon.

Specification

Technical

Input/Output Port| 1 x HDMI IN, 4 x HDMI OUT
Input/Output Signal Type| HDMI 1.4a, 3D and DVI 1.0
Input/Output Resolution Supported| 3840 x 2160@30Hz (4K),1920 x 1080@60/50/30/25/24Hz,1280 x 720@60/50/30/25/24Hz,720 x 576@50Hz,720 x 480@60Hz
Audio Format| Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD,Dolby Atmos, DTS-HD Master Audio, DTS:X
Maximum Data Rate| 10.2Gbps
Maximum Pixel Clock| 340MHz
General

Operating Temperature| 0°C to 45°C (32°F to 113°F)
Storage Temperature| -20°C to 70°C (-4°F to 158°F)
Humidity| 10% to 90%, non-condensing
ESD Protection| ±8kV (Air-gap discharge)/
General

| ±4kV (Contact discharge)
Surge Protection| Voltage: ±1 kV
Power Supply| DC 5V 1A
Power Consumption(Max)| 2W
Device Dimension(W x H x D)| 14.0 cm x 6.4 cm x 2.4 cm /5.51” x 0.79” x 2.57”
Product Weight| 0.28kg/0.62lb

Wiring

1. Connect an HDMI source device (such as a Blu-ray player) to the splitter.
2. Connect four HDMI displays (such as HD monitors) to the splitter.
3. Connect all the devices to their power supplies, power them on

EDID Management

The splitter features automatic EDID without DIP switch for EDID management, and enables the source to output the most-suitable timing to all displays by analyzing and mixing their different EDID information. For example, when Output 1 connects to a display with 4K@30Hz, LPCM 5.1CH as default EDID, Output 2 connects to a display with 1080p@60Hz, LPCM 2CH, and Output 3 connects to a display with 720p@60Hz, LPCM 5.1, then the source will output 720p@60Hz, LPCM 2CH to all displays.

Troubleshooting

Most problems that occur are due to simple issues. If you have trouble, please check the list of simple fixes below.

SPLITTER TROUBLESHOOTING

PROBLEM| SOLUTION
POWER LED OFF| Ensure that the splitter is powered on.
Check that the cables are qualified andconnected properly.

NO PICTURE

| Verify that all the devices are powered on, and that all the cables are qualified and connectedproperly.
Verify that the display devices work properly and that the source device hasnormal signals output.
Check the length of HDMI cable. Themaximumlength is 10 meters.

Limited Warranty

1. Limited Warranty
   a. General Subject to the terms and conditions of this Limited Warranty, from the date of sale through the period of time for product categories specified in Section 1
   (b), ADI warrants AVARRO branded products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted. Except as required by law, this Limited Warranty is only made to Buyer and may not be transferred to any third party. ADI shall have no obligation under this Limited Warranty or otherwise if:

2. The product is improperly installed, applied or maintained;

3. The product is installed outside of stated operating parameters, altered, or improperly services or repaired;

4. Damage is caused by outside natural occurrences, such as lightning, power surges, fire, floods, acts of nature, or the like.

5.  resulting from unauthorized modification, misuse, vandalism, or other causes unrelated to defective materials or workmanship, or failures related to batteries of any type used in connection with the products sold hereunder. ADI only warrants those products branded AVARRO and sold by ADI. Any other products branded by third parties are warranted by the third-party manufacturer for a period as defined by the third-party manufacturer, and ADI assigns to Buyer those warranties and only those warranties extended by such third-party manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.
   b. Specific Warranties for product categories are as follows:

6. Product Categories	Warranty Period
   HDMI Distribution	2 years

7. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED, OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. Any product description (whether in writing or made orally by ADI or ADI’s agents), specifications, samples, models, bulletin, drawings, diagrams, engineering sheets, or similar materials used in connection with the Buyer’s order are for the sole purpose of identifying ADI’s products and shall not be construed as an express warranty or condition. Any suggestions by ADI or ADI’s agents regarding use, applications or suitability of the products shall not be construed as an express warranty or condition unless confirmed to be such in writing by ADI. ADI does not represent that the products it sells may not be compromised or circumvented; that the products will prevent any personal injury or property loss by burglary, robbery, fire or otherwise, or that the products will in all cases provide adequate warning or protection. Buyer understands and will cause its customer to understand that a properly installed and maintained product is not insurance or guarantee that such will not cause or lead to personal injury or property loss. CONSEQUENTLY, ADI SHALL HAVE NO LIABILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING. However, if ADI is held liable whether directly or indirectly for any loss or damage with respect to the products it sells, regardless of cause or origin, its maximum liability shall not in any case exceed the purchase price of the product, which shall be fixed as liquidated damages and not as a penalty and shall be the complete and exclusive remedy against ADI.

8. Limitation on Liability to Buyer’s Customers.
   Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer acknowledges that ADI shall only be deemed to give consumers of its products such statutory warranties as may be required by law and at no time shall Buyer represent to its customers and/or users of ADI products that ADI provides any additional warranties. By accepting the products, to the fullest extent permitted by law, Buyer assumes all liability for, and agrees to indemnity and hold ADI harmless against and defend ADI from, any and all suits, claims, demands, causes of action and judgments relating to damages, whether for personal injury or to personal property, suffered by any person, firm, corporation or business association, including but not limited to, Buyer’s customers and/or users of the products because of any failure of the products to detect and/or  arn of the danger for which the goods were designed or any other \failure of the products whether or not such damages are caused or contributed to by the sold or joint concurring negligence or fault of ADI.

9. Returns
   Subject to the terms and conditions listed below, during the applicable warranty period, ADI will replace Product or provide a credit at purchase at its sole option free of charge any defective products returned prepaid. Any obligations of ADI to replace Limited Lifetime warranty products pursuant to this warranty which result from defect are limited to the availability of replacement product. ADI reserves the right to replace any such products with the then currently available products, or provide a credit in its sole discretion. In the event Buyer has a problem with any ADI product, please call your local ADI branch for return instructions:
   For US call 1-800-233-6261
   For Canada call 877-234-7378
   For Puerto Rico call 787-793-8830
   Be sure to have the model number and the nature of the problem available. In the event of replacement, the return product will be credited to Buyer’s account and a new invoice issued for the replacement item. ADI reserves the right to issue a credit only in lieu of replacement. If any AVARRO branded products are found to be in good working order or such product’s inability to function properly is a result of user damage or abuse, the product will be returned to Buyer in the same condition as received and Buyer shall be responsible for any return freight changes.

10. Governing Law
    The laws of State of New York apply to this Limited Warranty.

11. Miscellaneous
    Where any term of this Limited Warranty is prohibited by such laws, it shall be null and void, but the remainder of the Limited Warranty shall remain in full force and effect.

References

• AVARRO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>