nedis KAPC175SS LED Display Party Cooler User Guide

nedis KAPC175SS LED Display Party Cooler

For more information see the extended manual online: ned.is/kapc175ss

Intended use

• This product KAPC175SS is a mobile cooler with a capacity of 75 L.
• The product is not intended for professional use.
• Any modification of the product may have consequences for safety, warranty and proper functioning.
• The product is intended for indoor use only.

Specifications

Main parts

1. Lid
2. Basket
3. Thermostat button
4. Display
5. Power button
6. Wheels

Safety instructions

• Contains one or more (extremely/highly) flammable components.
• Contains one or more (extremely/highly) flammable components

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
• Only use the product as described in this document.
• Close supervision is necessary when the product is used by or near children, animals or infirm persons. Do not allow children to play with it or touch it.
• Do not unplug the charger by pulling on the cable. Always grasp the plug and pull.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• Do not block ventilation openings and make sure that there is enough space around the product.
• Do not use electrical products inside the food storage compartment, unless recommended by the manufacturer.
• Do not puncture or heat any part of the refrigerant circuit.
• Do not store explosive substances, such as aerosol cans, with a flammable propellant in this product.
• Before cleaning or moving, switch off the product and disconnect the power.
• Do not use the product where splashing of water might occur, e.g. bathroom, swimming pool or close to a washbowl.
• Do not expose the product to direct sunlight, naked flames or heat.
• Ensure the power cable is not trapped or damaged when placing or installing the product.
• Do not disconnect the product by pulling on the cable. Always grasp the connector and pull.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Store the unit indoors.

Installing the product

1. Place the product on a stable and flat surface.
2. Clean the product with a damp cloth.
3. Dry thoroughly before use.

Using the product

If the product has been tilted, allow it to stand upright for 20 to 30 minutes before plugging it in.

1. Plug the power cable into a power outlet with power.

2.  Press A5 to switch on the product.

3. Press A3 to adjust the cooling temperature.

   • 4A4 flashes during the adjustment.

   • 4The temperature in the product depends on the temperature in the surrounding area, the contents of the product and how often
     and how long the lid is opened.

   • 4Keep the lid closed for better cooling.

ABOUT COMPANY

• Nedis BV
• De Tweeling 28, 5215 MC ’s-Hertogenbosch
• The Netherlands

References

• Smart solutions for your daily needs | Nedis

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>