SKYDANCE R Series Ultrathin Touch Slide RF Remote Controller Instruction Manual
- June 8, 2024
- SKYDANCE
Table of Contents
SKYDANCE R Series Ultrathin Touch Slide RF Remote Controller
Features
- Apply to single color, dual color ,RGB, RGB+W or RGB+CCT LED controller.
- Ultra sensitive color adjustment touch slide.
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be easily stuck on back holder or any metal surfaces.
- White & Black available
Technical Parameters
Input and Output
Output signal
| RF(2.4GHz)
Working voltage|
3VDC(CR2032)
Working current
| <5mA
Standby current|
<10μA
Standby time
| 1 year
Remote distance|
30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)|
EN 62368-1:2020+A11:2020
Radio Equipment(RED)
| ETSI EN 300 328 V2.2.2
Certifcation|
CE,EMC,LVD,RED
Package
Size| L156 x W48 x H22mm
Gross weight|
0.075kg
Environment
Operation temperature|
Ta: -30 OC ~ +55 OC
Warranty
Warranty|
5 years
Mechanical Structures and Installations
To fix the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote’ back holder on the wall with two screws.
Option 3: adhere the remote’ back holder to the wall with paster.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes were
deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Key function
-
R11 1 zone dimming remote
-
R12 1 zone CCT remote
-
R13 1 zone RGB remote
-
R10 1 zone RGB+CCT
-
R14 1 zone RGBW remote
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle remote, beware of falling.
-
For indoor and dry location use only