ALOGIC CD2 Dual 4K Universal Compact Docking Station User Guide

ALOGIC CD2 Dual 4K Universal Compact Docking Station

Package Contents

1. CD2 Docking Station
2. USB-C to USB-A Adapter
3. User Manual

Connect

1. USB-C PD Power input
2. SD Card Slot
3. USB-A Port
4. USB-C Port (Data only)
5. Power Indicator
6. USB-C (to computer)
7. Gigabit Ethernet Port
8. DisplayPort Video (to Monitor)
9. Security Lock

Setting

Specification

• Model                     DUCD2

• Dimensions            120 x 120 x 26mm (LX WX H)

• Weight                   320g

• Output                  2x DisplayPort
  1x USB-C 3.2 Gen 2 (10G)
  1x USB-A 3.2 Gen 2 (10G,BC 1.2 and Apple Charging Support)
  1x Full Size SD Card Slot (SD 4.0, UHS-I)
  1x RJ45 Ethernet 1Gbps

• Input                     1x Integrated USB-C cable (adapter included for USB-A computers)
  1x USB-C power input; supports USB Power Delivery (USB PD) power sources up to 100W

• Power                     Dock can be powered from the host computer or by connecting a USB-C Power Delivery (USB PD) power adapter (not included). Dock can accept up                                to 100W of power froma suitable USB PD power adapter to power the dock and charge the computer

• Max Resolution      Up to 2 x 4K UHD (2x 3840×2160 60Hz maximum)

• Audio Support       Supports DisplayPort audio output

• Device Compatibility  Windows, MacOS, Chrome OS Computers

• Compliance            FCC, CE

• Warranty                2 Years

Warning This device is designed for indoors use only. Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions. Disassembling or failing to properly use and care for your device will void the warranty on the product. ALOGIC bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care and is not liable for repair/replacement of the device or other damages in these circumstances.

Congratulations on purchasing this quality ALOGIC product.
The ALOGIC DUCD2 docking station allows you to connect two external monitors, USB devices and wired network while charging your laptop over a single cable.

Instructions

(Refer to the images on the previous pages)

1. Installing the Drivers
   The dock uses DisplayLink technology to provide universal support for a wide range of computers and operating systems. The latest DisplayLink software should be
   installed following these steps:
   Download the DisplayLink driver for your operating system from www.displaylink.com/downloads
   Run the installer once downloaded and follow the prompts
   Restart your machine

2. Connecting a Power Adapter (Optional)
   The dock can operate using power from the computer USB port that it is connected to or trom an external USB Power Delivery (PD) power adapter (not included).
   When a USB PD power adapter is connected to the USB-C PD inputthe dock will accept up to 100W of power, securing 22W to power the dock and making any
   remaining power available to charge the computer.
   The USB PD power adapter chosen for use with the dock should be rated at least as high as the Wattage of the laptop’s original charger plus 22W. Using a 10OW PD
   power adapter with the dock is recommended and will provide adequate power to charge most laptops.
   Note that the computer must support USB PD charging for passthrough charging to work and USB PD charging will only work when the dock is connected to a
   USB-C port on the computer. UsB PD charging does not work with USB-A ports (such as when the USB-A adapter is used with the dock).
   Some high performance laptops require more power than the 78W maximum that this dock can provide; the original laptop charger for these computers should
   be connected directly to the laptop. There is no risk of damage to the laptop if separate USB PD power adapters are connected to the dock and the computer at
   the same time.

3. Connecting the Dock to the Laptop
   Connect the USB cableattached to the dock to your computer.It is recommended that the dock be connected to a USB-C port if the computer has one however a
   USB-A adapter is provided to connect the dock to older computers that do not have UsB-C ports.
   The dock will be detected and configured by your computer automatically when connected. This process will take a few seconds the first time you plug the device into
   your laptop. You may receive a notification that it has been installed and is ready for use.
   Not every USB-C port on notebook computers Supports charging. f your computer doesnt start charging when a power supply is connected to the device and
   the device is connected to your computer, try a different USB-C port on your machine or consult the computer’s manual to determine which ports accept power
   from UsB PD power sources.

4. Connecting Devices to the Dock
   Once the device has been recognised and set up by your computer it is ready for use and you can connect other devices as desired. Connect external devices such as
   monitors, USB devices, and an Ethernet network cable to the dock, as necessary. Refer to Page 5 of these instructions for an outline of the available ports and their functions.
   USB ports on computers provide limited power. When the dock is operating without an external power adapter connected the USB-C port on the front of the
   dock is disabled due to power constraints.

Resolution Support Table
This dock provides universal support for the following maximum resolutions on all computers.

Troubleshooting

ALOGIC recommend the use of ALOGIC cables to ensure reliable,

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interterence, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link: www.alogic.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>