SOMOGYI NGA 02 Grounded Double Socket Instruction Manual
- June 8, 2024
- SOMOGYI
Table of Contents
SOMOGYI NGA 02 Grounded Double Socket
Instruction
GROUNDED DOUBLE SOCKET WITH STRAIGHT CABLE LEAD-ING
Installation:
Installation can only be carried out by qualified personnel, in voltage-free
state! Unscrew the bolts, then stretch the rubber cover. Pull the cover onto
the cable. Unscrew the wire strain relief. Remove the outer insulation 4 cm
long. Strip down the grounding-, neutral- and phase wires 10 mm long. Connect
the grounding (green / yellow) wire to the middle, to the terminal marked with
mark, and then connect the neutral (blue) and phase (brown or black) wires as
well. Fix the part of cable with outer insulation with the cable strain
relief. Pull back the cover to its place. Fasten both screws and check if the
cover is fixed in its place. Otherwise the inner part can slip out during use.
Warnings: It can only be used with rubber cable, e.g.
- H05RN-F. IP44: Protected against splashing water from all direction.
- Temperature range: -10 – +40 °C.
- Cross section of applicable wire: 1,0 mm2, up to 1,4 – 2,0 m wire length / 1,5 mm2, up to 1,4 – 5,0 m wire length. Strain relief must be fixed only on sheated part of wire!
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazard-ous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distribu-tor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
Producer
www.somogyi.hu