SKYDANCE V1-N Mini Size Rf2.4g Wireless 75w Push-dim LED Controller User Manual
- June 8, 2024
- SKYDANCE
Table of Contents
Size Rf2 4g Wireless 75w Push-dim LED Controller
User Manual
RF Push Single Color LED Mini Controller
Model No.: V1-N
1 channel constant voltage/Push-Dim/Max 75W/Step-less dimming/Wireless remote
control
Features
- 1 channel constant voltage single color LED mini RF controller.
- 3A per channel, output connect with 5 meters single color LED strip, max output power 75W.
- Connect with push switch to achieve on/off and 0-100% dimming function.
- Match with RF 2.4G single zone or multiple zone dimming remote control optionally.
- One RF controller accept up to 10 remote control.
- 4096 levels 0-100% dimming smoothly without any ash.
- Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
- Synchronize on multiple number of controllers.
Technical Parameters
| Input and Output | Dimming data | Safety and EMC |
|---|---|---|
| Input voltage | 12-24VDC | Input signal |
301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Output voltage| 12-24VDC| Control distance| 30m(Banierfree space)
Output power| Max. 75W| Dimming gray scale| 409612^121 levels| Safety
standard(LVD)| EN 62368-1:2020+A11:202C
Output type| Constant voltage| Dimming range| 0 -100%| RadioEquipment(RED)|
ETSI EN 300 328 V2.2.2
Environment 1| | Dimming curve| Logarithmic| Certification| CE,EMC,LVD,RED
Operation temperature| To: -30°C – +55°C| PWM Frequency| 500Hz (default)|
Package L ala|
Case temperature (Max.)| To: +85°C| Warranty| 5 years| Size| 190x H 130mm
4| | | 4.| Gross weight a| 0.013kg
Dimension
Wiring Diagram
Push Dim function:
| Click | ON/OFF |
|---|---|
| Double Click | Turn on at 100% or 10% (night light) and vice-versa |
| Long press(>1s) from OFF | Dimming UP/DOWN |
| Long press(>1s) from ON | Dimming UP/DOWN |
Match Remote Control
Match:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Another way to match:
The receiver is power on for five consecutive times, the LED strip light start
blinking slowly for 10s, Immediately short press on/off key (single zone
remote) or zone key (multiple zone remote) on the remote. The light blinks 3
times means match is successful.
Dimming Curve
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|---|---|
| No light | 1. No power. | |
| 2. Wrong connection or insecure. | 1. Check the power. |
2. Check the connection.
Malfunctions No light| 1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the remote.| 1. Replace battery.
2. Reduce remote distance.
3. Re-match the remote.
Installation Precautions
- The products shall not be stacked, the distance should be ≥ 20cm, so as not to affect lifespan of the products due to poor heat dissipation.
- The product shall not be installed close to the switching power supply with an interval of ≥ 20cm to avoid the radiation interference of the switching power supply.
- The installation height shall be ≥ 1m from the oor to avoid shortening the remote control distance due to too weak reception signal.
- The products are not allowed to be close to or covered by metal objects, with an interval of ≥ 20cm to avoid signal attenuation and shorten the remote control distance.
- Avoid installation at the corner of the wall or the corner of the beam, with an interval of ≥ 20cm to avoid signal interference.