SKYDANCE VP + R8-1 RGW LED Strip Controller Kit Instruction Manual

SKYDANCE VP + R8-1 RGW LED Strip Controller Kit

RGBW LED Strip Controller Kit

Model No.: VP+ RB-1 4 channels constant voltage/Touch cob- “Wheel/Step- less dimming/Wireless remote 30m distance

Features

• Mini style controller with 4 channel constant volloge output
• Ultra sensitive color adjustment touch wheel.
• Smooth dimming and switch without any flickering
• Built in 10 dynamic mode, include jump or gradual change style
• Independent dimming function of each R, G, B, W channel to achieve millions of colors
• Auto-transmitting function: Controller automaticfy transmit signal to another controller with 30m control distance.
• Synchronize on multiple number of controllers.
• Light on/off fade time 3s selectable.

Technical Parameters

Mechanical Structures and Installations

Wiring Diagram

Remote function

• Tum on/off light
• Color wheel: Touch to change static RGB color.
• Mode: Short press run the next dynamic mode, long press 2s run mode cycle
• Speed/Saturation: For dynamic mode, adjust speed, short press l O levels, long press 2s get the default speed For static color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
• Bright+/-: Adjust brightness, short press l O levels, long press l-6s for continuous 256 levels adjustment.
• R/G/B: Short press get red, green or blue color diredy, long press l-6s adjust R/G/B brightness continuousfy to achieve millions of colors
• W+/-: Short press turn on/off whitelRGB mix), long press 1-6s adjust saturation continuously, namely change current static RGB color to mixed white slowly.
• Scene: Short press recall the scene, long press 2s save the current color into the scene.
• When light is on, touch the color wheel, the indicator will display red.
• To extend lxittery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state

Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options ore offered for selection:

Use the controller’s Match key

• Match:
  Short press match key, immediately press on/off key (single zone remote) or zone key (multiple zone remote) of the remote.

• Delete:
  Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted

Use Power Restart

• Match:
  Switch off the power, then switch on power, repeat again. Immediately short press on/off key 3 times on the remote The light blinks 3 limes means match is successful

• Delete:
  Switch off the power, then switch on power, repeat again Immediately short press on/off key 5 times on the remote. The light blinks 5 times means all matched remotes were deletecd.

Application notes

All the receivers are matched with one RF remote.

RF remote

• Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m, as long as there is a receiver within 30m, the remote control distance can be extended Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote, under same dynamic mode and with same speed. Receiver placement may offer up to 30m communication distance. However, we recommend for indoor applications that receiver placements should be no further apart than 15m

Dynamic mode list

Light on/off fade time

Long press match key 5s, then short press match key 3 fimes, the light on/ott time will be set to 3s, the indicator light blink 3 times. Long press match key 10s, restore tactory detault parameter, the light on/off time also restore to 0.5s.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>