SKYDANCE R8-1 Ultrathin RGB-RGBW Touch Wheel RF Remote Controller Instruction Manual
- June 8, 2024
- SKYDANCE
Table of Contents
SKYDANCE R8-1 Ultrathin RGB-RGBW Touch Wheel RF Remote Controller
Model No.: R8, R8-1
1 and 4 zone RGB or RGBW/Touch color wheel/Wireless remote 30m
distance/CR2032 battery
Features
- Apply to RGB or RGBW LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Operate with LED indicator light.
- White & Black available.
Technical Parameters
Input and Output
Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| <5mA
Standby current| <10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certi cation| CE,EMC,LVD,RED
|
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Package
Size| L114 x W65 x H20mm
Gross weight| 0.062kg
Warranty
Warranty| 5 years
Mechanical Structures and Installations
To fix the remote, two options are offered for selection:
Option 1: fix the remote’ back holder on the wall with two screws.
Option 2: adhere the remote’ back holder to the wall with paster.
Note:
- Before the first use, please remove the protective film on the battery.
- If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver.
Operation
- When light is on, touch the color wheel, the indicator will display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use the controller’s Match key
Match: Short press match key, immediately press on/off key (single zone
remote) or zone key (multiple zone remote) of the remote. The LED indicator
fast flash a few times means match is successful.
Delete: Press and hold match key for 5s to delete all match, The LED
indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match: Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 3 times on the remote. The light blinks 3 times means match is
successful.
Delete: Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 5 times on the remote. The light blinks 5 times means all matched
remotes were deleted.
Key function
- R8 4 zone RGB/RGBW remote
On/Off: Short press turn on/off all zone light.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s
turn off zone light. Short press multiple zone key fastly, will synchronous
select multiple zone synchronously.
Color wheel: Touch to change current zone static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode
cycle.
Bright+/-: Static color, adjust brightness, short press 10 levels, long
press 1-6s for continuous 256 levels adjustment.
Speed+/- : Dynamic mode, adjust speed, short press 10 levels, long press
2s get the fastest or slowest speed.
W: For RGB light, short press turn on/off white(RGB mix), long press 1-6s
adjust saturation continuously, namely change current static RGB color to
mixed white slowly.
For RGBW light, short press turn on/off W channel, long press 1-6s adjust W
brightness continuously. Scene: Short press recall the scene, long press 2s
save. the LED indicator will light up longer when save OK.4 zone recall or
save synchronously.
- R8-1 1 zone RGB/RGBW remote
On/Off: Turn on/off light.
Color wheel: Touch to change static RGB color.
Mode: Short press run the next dynamic mode, long press 2s run mode
cycle.
Speed/Saturation: For dynamic mode, adjust speed, short press 10 levels,
long press 2s get the default speed. For static color, adjust saturation,
namely change current static RGB color to mixed white slowly, short press 11
levels, long press 1-6s for continuous 256 levels adjustment.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for
continuous 256 levels adjustment.
R/G/B: Short press get red, green or blue color directly, long press 1-6s
adjust R/G/B brightness continuously to achieve millions of colors.
W+/-: For RGB light, short press turn on/off white(RGB mix), long press
1-6s adjust saturation continuously, namely change current static RGB color to
mixed white slowly. For RGBW light, short press turn on/off W channel, long
press 1-6s adjust W brightness continuously.
Scene: Short press recall the scene, long press 2s save the current color
into the scene. the LED indicator will light up longer when save OK.
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle remote, beware of falling.
-
For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>