allgood Electromagnetic Hold Open Device Instruction Manual
- June 9, 2024
- allgood
Table of Contents
allgood Electromagnetic Hold Open Device
Fixing instructions for Electro-magnetic hold open device for:
9133NE/9134NE concealed closers when used with the approved 2mm thick
intumescent kit for fire-rated doors. Dimensions in brackets refer to the
9134NE EN3-6 model. Please disregard channel fixing instructions/dimensions
supplied with mechanical door closers if this Electromagnetic hold-open
version is being used. Issue 01-02/22.
Dimension
Installation Instruction
Adjust the pull-off force to suit the door width and size of the door closer. Notice, if the pull-off force is set too high, it may damage the hinges and the fixing of the door closer system.
1155 states that the release torque at 90° door opening angle should be between 40 and 120 Nm.
References
Read User Manual Online (PDF format)
Loading......