SKYDANCE R6, R6-1 Ultrathin Dimming Touch Wheel RF Remote Controller User Guide
- June 9, 2024
- SKYDANCE
Table of Contents
Ultrathin Dimming Touch Wheel RF Remote Controller
Model No.: R6, R6-1
User Guide
R6, R6-1 Ultrathin Dimming Touch Wheel RF Remote Controller
1 and 4 zone dimming/Touch brightness wheel/Wireless remote 30m
distance/CR2032 battery
Features
- Apply to single color LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receiver.
- CR 2032 attery powered.
- Operate with LED indicator light.
- White & Black available.
Technical Parameters
Technical Parameters
Input and Output
Output signal| RF GH (2.4 GHz)
Working voltage| 3VDC (CR2032)
Working current| <5mA
Standby current| <10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certi| CE,EMC,LVD,RED
Environment
Operation temperature| Ta: -30 ºC ~ +55 ºC
Package
Size| L114 x W65 x H20mm
Gross weight| 0.062kg
Warranty
Warranty| 5 years
Mechanical Structures and Installations
To fix the
remote, two options are offered for selection:
Option 1:
fix the remote’ back holder on the wall with two screws.
Option 2:
adhere the remote’ back holder to the wall with paster.
Note: 1. Before the first use, please remove the protective film on the
battery.
2. If the LED indicator is not on when press key, it is due to dead battery
or bad contact caused by multiple plugging, please replace the battery, or
raise the battery shrapnel with a screwdriver.
Operation
- When light is on, touch the color wheel, the indicator will display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered
for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key (single zone remote) or
zone key (multiple zone remote) of the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times means all matched remotes were
deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote) or zone key (multiple
zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Key function
● R6 4 zone dimming remote
On/Off: Short press turn on/off all zone light.
1,2,3,4 zone: Short press select and turn on zone light, long press 2s
turn off zone light.
Short press multiple zone key fastly, will synchronous select multiple zone
synchronously.
Bright wheel: Touch to change current zone brightness.
Bright+/-: Adjust brightness for current selected zone, short press 10
levels, long press 1-6s for continuous 256 levels adjustment.
3 Scene: Short press recall the scene, long press 2s save the current
state into the scene.
the LED indicator will light up longer when save OK.
4 zone recall or save synchronously.
The remote can be used as 4 zone dimming remote or single zone 4 channel
dimming remote.
On/Off + 4: Long press 2s set as 4 channel dimming remote, only match
with one or multiple receiver of 4 channel, such as V4 or C4 controller.
On/Off + 1: Long press 2s set as 4 zone dimming remote, each zone match
with one or multiple receivers.
When set ok, the red indicator will light on longer.
● R6-1 1 zone dimming remote
On/Off: Turn on/off light.
Bright wheel: Touch to change brightness.
Bright+/-: Adjust brightness, short press 10 levels, long press 1-6s for
continuous 256 levels adjustment.
100%,75%,50%,25%: Get 4 kinds brightness directly.
3 Scene: Brightness memory.
Short press recall the scene, long press 2s save the current brightness into
the scene.
the LED indicator will light up longer when save OK.
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle remote, beware of falling.
-
For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>