Trudo 1980 Kitchen Cabinet Instruction Manual
- June 10, 2024
- Trudo
Table of Contents
1980 Kitchen Cabinet
Product Information:
-
Material: Laminated Particle Board and Medium Density Fibre
Board -
Assembled on: Dry, Soft, Smooth and Clean Surface
-
Hardware included: Euro bolt, screw #9 x 1 1/2, wood dowel
MBX25, wood dowel M6X25, screw cap hinges, metal runner screw
M4X12
Product Usage Instructions:
-
Ensure that you have all the required hardware as mentioned in
the user manual. -
Select a dry, soft, smooth and clean surface to assemble the
product. -
Do not use any detergent or chemicals to clean the surface
where the product is going to be assembled. -
Avoid assembling the product in damp or sunlight exposed
areas. -
Follow the step-by-step instructions given in the user manual
to assemble the product. -
Use the Euro bolt, screw #9 x 1 1/2, wood dowel MBX25, wood
dowel M6X25, screw cap hinges, and metal runner screw M4X12 to
assemble the product. Make sure to use them in their designated
locations as instructed in the user manual. -
Once assembled, check the product for stability and ensure that
all parts are securely fastened.
Following these instructions will ensure proper assembly and
usage of the product.
ASSEMBLING INSTRUCTIONS
CAUTION: THIS ITEM IS MADE OF LAMINATED PARTICLE BOARD AND MEDIUM DENSITY
FIBRE BOARD TO BE ASSEMBLED ON A DRY, SOFT, SMOOTH AND CLEAN SURFACE. DO NOT
USE DETERGENT OR CHEMICAL. AVOID DAMP AND SUNLIGHT.
1980
STEP1
CHECK YOUR HARDWARE
HOUSING D:15/12 .5MM HOUSING D:12/9.5MM EURO BOLT
…….. SCREW #9 X 1 1/2″
WOOD OOWEL MBX25
–
®
–
WOOD OOWEL M6X25 SCREWCAP HINGES METAL RUNNER SCREWM4X12
<11111@ SCREW M3.5X 14
HANOLE
“””””° PAN HEAO SCREW#6X22
(i’;l
LEG STUD
–@
©
SCREWM3X20 CORNER BLOCK WEBBING
TOOLS REQUIRED
= = SCREW DRIVER
STEP2
6450A-1
6PCS
5 PCS
11 PCS
26 PCS 30PCS 1 PC 1 3PCS 6SETS 1 SET 12PCS 25 PCS
STEP7
SCREW #9 X 1 1/2″ 15–tp5
7
1
·
·,
STEPS PAN HEAO SCREW #6X22
3PCS
6PCS
BPCS BPCS
STEP9
BPCS 1 PC
CJ== HAMMER
SCREWM4X12
–
! ,
Hole
–
–
‘, )
METAL RUNNER/ , .–_-‘ – ,- –,/,
OETAILA
STEP 10
STEP 14 STEP 15
STEP 19
Hlngas AdJuatment FacilitiH
A.Lateral
B.Vertical
C.Front-to-Beck
adjustment by adjustment by the slacking
screw adjusting via slot in the the hinges arm
mounting platemounting screw
DETAILB
. r rIT·
STEP 3
OETAIL B
STEP 12
DET”ÁILA
STEP4
SCREWM3.5X14
,,,/– ,,,
– · PAN HEAO
i HINGES . —
‘! -,,, ÈrA1’i:
SCREW__X 22 Î
HANDL DÈTAiLB
STEP 1 3
STEP5
szfF9)METAL RUNNER
‘,, ____ 1/
1
DETAIL A
STEP 16
· rL
SCREWM3.5X14 / ,,DÊTÁIL·
STEP20
STEP 17
STEP21
$CREWM3.5X14
,
‘
WEBBINGI” ,,’-,—-,
.. _____,,
DETAIL B
Move fumltura to 118 flnalposHlonthanoonnact to wal.l Seak advlce tromquallfled trades person on how to attachthls to your spacfflc wal.l
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>