FEELWORLD FW-W1000H Wireless Transmission System User Manual

FEELWORLD FW-W1000H Wireless Transmission System

INSTALLATION INSTRUCTION

PORT INSTRUCTION

Transmitter

1. Antenna Ports
2. Power OFF/ON
3. Type-C Power Input/Upgrade
4. DC Power IN
5. OLED Screen
6. UP button
7. OK button
8. DOWN button
9. HDMI Signal Output
10. HDMI Signal Input
11. SDI Signal Input（optional）
12. 3.5mm Earphone Port
13. 1/4 Screw Hole

Receiver

1. Antenna Ports
2. Power OFF/ON
3. Type-C Power Input/Upgrade
4. DC Power IN
5. OLED Screen
6. UP button
7. OK/MENU button
8. DOWN button
9. HDMI Signal Output1
10. HDMI Signal Output2
11. SDI Signal Output(optional)
12. 3.5mm Earphone Port
13. 1/4 Screw Hole

UI INSTRUCTION

1. Startup
   The startup screen is as above. When the device runs, the main menu will display.

2. Main Menu
   Main menu including channel, device type(TX/RX), link status, signal strength, video format, intercom mode, battery level, temperature, fan status, etc. information.

3. Channel switch: press“△”or“▽”to change channels. Press“□”to confirm the channel.

4. Long press“△”on the transmitter, the screen will display device name and password. Long press“△”on the receiver, the screen will also display device name and password if it is connected to transmitter.

5. Secondary Menu
   Long press“□”for 2 seconds to enter into the secondary menu. Long press“□”for 2 seconds again to back to the secondary menu. Press“△”or“▽”to switch the options in secondary menu and press“□”to confirm selection.

• Device (transmitter only): device type
  Switch TX (transmitter) and RX (receiver) manually.

• Source (transmitter with SDI port only): signal source
  Switch the signal source between HDMI and SDI on transmitter. SDI input is selected by default if both HDMI and SDI sources are connected.

• FAN status
  Turn on or off the fan manually

• Intercom
  Switch between Full Duplex, TD mode(TD speak, Cameraman listen), OFF(turn off intercom)

• WPS: pairing
  To pair transmitter and receiver. One Transmitter allows to pair 4 receiver maximum. Turning on WPS both for transmitter and receiver at the same time, then turn off the receive which finished pairing. Using the same pairing method to add next one receiver. Last, turning on all of the paired devices.

• Priority
  Choose high image quality prior or low latency prior.

• WIFI_SSDI
  Showing device name and password

• Version
  Showing the device’s version number

• Web

• Telephone

• Language

• IP: IP address (only the receiver has this menu)

STREAMING INSTRUCTION

After the receiver links to transmitter and receives the video, plug the Type-C to Ethernet adapter to receiver’s Type-C port. The Type-C to Ethernet adapter will flash red light.

Static IP setting

1. The receiver’s default mode is static IP. It can be selected in the secondary menu IP->staticIP:
2. As the picture shown above, connect the Type-C to Ethernet adapter with computer via LAN cable.
3. The receiver’s static IP address is 192.168.11.111. It can be found on the receiver’s secondary menu. The computer also has to be set to static IP. Set the computer’s static IP to be 192.168.11.xxx, xxx can be replaced by any number between 2 and 254 not include 111. After the settings completed, run CMD->ping 192.168.11.111 on computer to check if it works.
4. Use the URL rtsp://192.168.11.111:554/test.264 on up streaming software such as VLC or OBS.

RouteIP setting

1. 1. Enter into the secondary menu on the receiver’s IP. Then select routeIP:
2. Connect a monitor to the receiver. Then connect the receiver to the router via the Type-C to Ethernet adapter. If the blue light flashes on the adapter, it indicates that the connection is good. The monitor will show the IP address.
3. Connect the computer to the router. Push streaming with the url: rtsp://IP address shown on the monitor/test.264

APP OPERATION INSTRUCTION

APP Download

• iOS APP Download

• Android APP Download (APP name: Feelworld Wireless)
  Search “feelworld wireless” on Google Play to get

• Scan the QR code to download

Connect smart devices to transmitter
After the transmitter is powered on, go to Setting-Wireless & networks on smartphone/tablet, select the transmitter’s name and input the password to connect the devices. Please find the transmitter’s name and initial password as below. Then go to APP home page and click “Video” to monitor.

( Note: No need to input password again if it was saved on smart phone/tablet)
Device name: FEELWORLD_5G_XXXXX
Password: 12345678

APP Operation ( e.g. Android System)

• a. Click “Video” on home page to enter into monitoring mode.
• b. Click “∨” at the bottom of screen. It will show SAVE IMAGE, RECORD ( only available for Android at present), MATERIAL, CONFIGURATION.
  • Long press the screen to show up the professional monitoring menu. Monochrome, False Color, Center Marker are available at present, more features are developing.
• c. Click “Material”to check the images and videos saved on smartphone/tablet.
• d. Click “ Configuration”to access configuration screen.
• e. Click 英文版/Chinese Version at the bottom of home page to change language.

PARAMETER

1  HDMI input, 1 HDMI output

2  *Antenna port （RP-SMA Male）

DC power input, 3.5mm headphone jack , Type-C

| 2* HDMI output

1* SDI output (optional)

2 *Antenna port （RP-SMA Male）

DC power input, 3.5mm headphone jack, Type-C

Power Supply Way/Voltage Range| F970 battery , Type-C: 5V/1.5A DC adapter: 6-16V

Note: Due to the actual output of some batteries will be greater than 16V, it may burn out. Please make sure that the actual output voltage

of the battery used is less than 16V.

| F970 battery , Type-C: 5V/1.5A DC adapter: 6-16V

Note: Due to the actual output of some batteries will be greater than 16V, it may burn out. Please make sure that the actual output voltage of the

battery used is less than 16V.

Power Consumption| <7.5W| <6.5W
HDMI Input/Output Video Format| 480P60, 576P60     720P60/59.94/50

1080P60/59.94/50/30/29.97/25

/24/23.98       1080I60/59.94/50

HDMI Type A

| 480P60, 576P60        720P60/59.94/50

1080P60/59.94/50/30/29.97/25

/24/23.98            1080I60/59.94/50

HDMI Type A

SDI Input/Output Video Format| 480P60, 576P60     720P60/59.94/50

1080P60/59.94/50/30/29.97/25/24/

23.98            1080I60/59.94/50

1*BNC

| 480P60, 576P60          720P60/59.94/50

1080P60/59.94/50/30/29.97/25/24/

23.98         1080I60/59.94/50

1*BNC

Frequency| 5.1-5.9GHz| 5.1-5.9GHz
Modulation Mode| OFDM| OFDM
Transmission Power| Maximum 17dBm| /
Receiving Sensitivity| /| -87dBm
Band Width| 20MHZ| 20MHZ
Latency| Min0.08S| Min0.08S
Intercom Frequency

Response Range

| 20Hz~20KHz|

20Hz~20KHz

Operating Temperature| 0℃ ～ 40℃| 0℃ ～ 40℃
Storage Temperature| -20℃ ～ 60℃| -20℃ ～ 60℃
Unit Size(mm)| 67L24W118H (excluding antenna）| 67L24W118H （excluding antenna）
Unit Weight| 128g| 128g

FREQUENCY CHART

Common Problem

1. The screen appears mosaic or the signal connection is unstable It means that there is a WIFI signal close to the transmission frequency, you can re-select another channel. (Note: only the receiver is allowed to adjust the channel)
2. When the transmitter and receiver cannot be connected. Please turn off the transmitter and receiver, then turn them on again at the same time, and turn on the WPS mode to pair again.
3. When signal frequency is weak Please try to choose another channel with a wider frequency span. (For ins tance, the signal of channel 10 is weak, please choose channel 1 or 6, but not channel 9 or channel 11).
4. The poor WIFI reception of the mobile phone It is related to the brand and model of the mobile phone. Please try different mobile phones.

As we are improving product features and product performance, so if there is any change on the specification without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>