LILLIPUT 7 Inch Android Tablet User Manual

June 9, 2024
LILLIPUT

LILLIPUT-logo

LILLIPUT 7 Inch Android Tablet

LILLIPUT-7-Inch-Android-Tablet-product

Important Safety Instructions

Read these safety instructions carefully:

  • It should avoid the humidity and extreme temperature when being used.
  • Avoid prolonged exposure of the unit to direct sunlight or strong ultraviolet light.
  • Do not drop the unit or let it be in any place with severe shock / vibration.
  • Please avoid the collision as the LCD screen is very easy to be scratched. Do not use any sharp object to touch the screen.
  • Please turn off the power and unplug the power cable before cleaning the device, then wipe it with a moist and soft cloth.
  • Never attempt to disassemble or repair the machine, otherwise the unit may be damaged.
  • Do not place your unit or accessories together with other flammable liquids, gases, or other explosive materials, to avoid danger.
  • Please unplug the power plug and remove the built-in battery If the device won’t be used for a long time, or under thunder and lightning.
  • It is suggested that the built-in battery will be charged once every three months to keep the battery power more than 70%. The battery will be charged and discharged with the three complete cycles to maximize battery performance. (A cycle of a complete charge and discharge means to run out of the battery power and to recharge the battery to full.)

Product Description

Brief Introduction

  • 7″ 16:10 capacitive touch wide screen, 1280×800 high resolution, with rich color;
  • Comply with IP67 rating Waterproof and Dustproof Standard;
  • Android 9.0 operating system;
  • Nano SD (TF) card and SIM card storage, reliable data reading and convenient daily expansion;
  • Speaker, Microphone;
  • RS232×4/RS232×3+RS485×1/RS232×3+RS422×1(Optional)

Optional Functions

  • GPS (external / built-in)
  • Wi-Fi 802.11 b/g/n/ac (built-in)
  • 4G (built-in)
  • Bluetooth 5.0 (built-in)
  • CAN BUS×1(default one CAN as standard, the another one as optional)
  • 3500mAh Li-ion battery (built-in)
  • NFC
  • Front Camera

Basic Parameters

Specifications

CPU| NXP i.MX 8M Mini, ARM® Cortex®-A53 Quad-Core 1.6GHz
GPU| 3D GPU (1xshader, Open GL®ES 2.0) 2D GPU
OS| Android 9.0
RAM+ROM| 2GB LPDDR4+16GB Flash
4GB LPDDR4+64GB Flash (optional)
Video Decode| 1080p60 (H.265, VP9, H.264, VP8)
Video Encode| 1080p60 (H.264)
Sensors| Light Sensor and Proximity Sensor, Gyroscope, Compass, Gravity, Accelerometer
Display
LCD| 7 inch IPS, 1280×800 resolution, 800 nit
Touch| Capacitive touch screen
Interface

LAN| 1000M
GPIO| ×8 (The software is free to define inputs or outputs)
CAN| ×1(Default one CAN as standard, the another one as optional)



COM

| RS232×4
RS232×3+RS485×1/RS232×3+RS422×1 (optional)
The optional Bluetooth will occupy COM0; optional external GPS will occupy COM2; Optional built-in GPS doesn’t occupy COM2.
Nano SIM Card Slot| ×1
Nano SD Card Slot| ×1
USB| USB Type-C OTG x 1, USB 2.0 Host x1
Earphone Jack| 3.5mm
Microphone| Built-in
Optional Functions
Cellular Network| 3G / 4G


WIFI

| IEEE 802.11 a/b/g/n/ac;
2.4GHz / 5GHz
Support MCS 0-7 for HT20 and HT40


BT

| Version:5.0

Standard:GFSK、DQPSK、8DPSK、LE(1Mbps)(2LE2Mbps) Frequency Band:2402~2480 MHZ



GNSS

| Installation Method:Built-in or external

◆ untethered dead reckoning (UDR)

◆ Max navigation update rate 30HZ GPS L1C/A, GLONASS L1OF, BeiDou B1I

NFC| ×1
ACC| ×1
Camera| 5.0MP (Front camera for optional)
WWAN


North America

| LTE-FDD:B2/B4/B5/B12/B13/B14/B66
WCDMA:B2/B4/B5
GNSS:GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS (Optional)



EMEA/South Thailand/India

| LTE-FDD:B1/B3/B5/B7/B8/B20
LTE-TDD:B38/B40/B41
WCDMA:B1/B5/B8
GSM/EDGE:B3/B8
GNSS:GPS/GLONASS/BeiDou (Compass)/ Galileo/QZSS (Optional)


Latin America

/Australia/New Zealand

| LTE-FDD:B1/B2①/B3/B4/B5/B7/B8/B28
LTE-TDD:B40
WCDMA:B1/B2/B4/B5/B8
GSM/EDGE:B2/B3/B5/B8
GNSS:GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS (Optional)



Janpan

| LTE-FDD: B1/B3/B8/B18/B19/B26
---|---
LTE-TDD:B41
WCDMA:B1/B6/B8/B19
GNSS:GPS/GLONASS/BeiDou (Compass)/ Galileo/QZSS (Optional)
Power
Power Supply| DC 9-36V (DC 11-36V with built-in battery)
Power Consumption| ≤10W (≤18W with built-in battery)
Battery(optional)| Built-in 3.7V 3500mAh
Others
Speaker| ×1
Dimension| 221×139.7×29.5mm
Weight| 910g





Environment

| Dust resistance test: IP6x Water resistance test: IPx7
Without battery operating temperature:

-20℃~65℃(-4℉~149℉)

0℃~50℃ (32℉~122℉)(Built-in battery)
Storage temperature:-20℃~70℃(-4℉~158℉)

Icon BarLILLIPUT-7-Inch-Android-Tablet-fig 1 LILLIPUT-7
-Inch-Android-Tablet-fig 2

Applied

Swipe up the“ ” icon in the lower left corner of the screen to see all the apps on the deviceLILLIPUT-7-Inch-Android-Tablet-fig 3LILLIPUT-7-Inch-Android-Tablet-fig 4

Structure ExplanationLILLIPUT-7-Inch-Android-Tablet-fig
5 LILLIPUT-7-Inch-Android-Tablet-fig 6

NFC Usage Demo

After activating NFC function, put the NFC card close to the sensing area. If the card is successfully recognized, there will be a beep. If the card contains some information. (such as manufacturer’s information), the interface will pop up, as shown in the figure below. If the card has been recognized, tahe interface will not always pop up, but there will be a beep.LILLIPUT-7
-Inch-Android-Tablet-fig 7 LILLIPUT-7
-Inch-Android-Tablet-fig 8

System Root Switch Usage Guide

  1. Refer to the following figure to enter the Root authority (on/off) function setting interface.LILLIPUT-7-Inch-Android-Tablet-fig 9
  2.  The root switch setting interface is as follows. In the figure, “1” is the Root permission (on/off) switcher. In the figure, “2” is the dialog for password modify function.LILLIPUT-7-Inch-Android-Tablet-fig 10
  3. Please enter the password (The initial password is qwertyuiop).LILLIPUT-7-Inch-Android-Tablet-fig 11
  4. Dialog for modifying the password required for the root permission (on/off) statusLILLIPUT-7-Inch-Android-Tablet-fig 12

Note! If the device is restored to the factory setting, the state of the root access will be reset to off, and the password will be restored to the initial password.

Extended Cable Definition

LILLIPUT-7-Inch-Android-Tablet-fig
13

No. Item Specification
1 Converter To connect with device cable

2

| COM 1 serial

port

| ****

RS232/Print port


3

| COM 2 serial

port

| ****

RS232/External GPS(Optional)


4

| COM 0 serial

port

| ****

RS232/Bluetooth function



5

| ****

COM 3 serial port

| RS232/RS485/RS422,TX–RS422_B,RX–RS422_A(COM3 fails

when RS422 and RS485 is available)

6| USB host port| For data transmission/USB 2.0
7| LAN port| For network connection/LAN 1000M
8| Power| Connect with power adapter/DC 9-36V


9

| ****

GPIO port

| 1/Black| 2/Green| 3/Blue| 4/Purple| 5/Grey
GND| common| GPIO 8| GPIO 7| GPIO 6
No.| Item| Specification
---|---|---
 | |

6/White

| ****

7/Pink

| 8/Light

green

| ****

9/Mono

| 10/Brown and

white

GPIO 5| GPIO 4| GPIO 3| GPIO 2| GPIO 1





10

| ****

CANBUS /RS 485







| 1/Green and

white

| ****


2/Green

| 3/Orange and

white

| ****


4/Orange

| ****


5/Blue

| 6/Blue and

white



CAN1H

| ****


CAN1L

| ****


CAN2H

| ****


CAN2L

| RS485+

/RS422

_Z

| RS485-/ RS422_

Y


11

| ****

ACC

| Ignition switch input : Trigger voltage: 6-30V,

Non-trigger voltage: 0-3V.

Introduction Of The Hardware Operation

Manage Device Power Supply

  1. Power on: Long press the power button, start the system after running the LOGO display. Short press the power button to wake up the system in deep sleep
  2. Power off: When the device is turned on, in non-sleep state, long press the power button for 2s, the optional menu will pop up. Select “Power off” to shut down the device, and then shut down the screen.
  3. Restart: When the device is turned on, in non-sleep state, long press the power button for 2s, the optional menu will pop up. Select “Restart” to restart the device, then the device will be shut down and restarted.
  4. Automatic sleep: Sleep time can be set in Setting; Press short to enter hibernation mode.
  5. Device Wake up: Short press the power button to wake up the sleeping device.
  6. The correct operation of the power button will help to ensure the stability of the system, and the color of the indicator light indicates the device status, as shown in the following table:
Indicator color Device Status(Charging/Discharging)
Green light on Uncharged or Full charged
Red light on Charging

Instructions SIM Card &TF Card
Before installing the SIM card, please turn off the device in advance. And insert the required card into the machine in the direction indicated in the figure below. Finally, press the power button to start the machine.
Note! TF card support hot plugging, SIM card doesn’t support.LILLIPUT-7
-Inch-Android-Tablet-fig 14

Installing & Replacing The Battery

  1. Rechargeable Battery for optional
    Due to transportation reasons, the battery will be partially depleted when you receive the device. And charging for the first time, be sure to fully charge the battery. Please keep the DC in a charged state when working. DC input power can be used prior to the internal battery when using the device so that the batteries can be stored after being fully charged. This excellent design is very helpful to extend the service life of the equipment battery and ensure safe use.

  2. Replacing the Battery
    The tablet battery is installed in a removable way, which greatly facilitates the user’s use of disassembly and installation.
    ( Note: Please shut down before removing the battery.)

  3. Installing the battery
    To install a new battery, orient the new battery so that the contact pins are aligned correctly, and assemble the battery cover and secure the retaining screws by using a screwdriver with flat head. Note! In order to ensure the life and performance of the battery, if your tablet has been stored in the warehouse for more than three months, it is suggested to charge the battery every three months.

ACC Setting Path
ACC settings are located in ACC options under Android OS Menu Settings. Automatically control screen brightening, hibernation and shutdown after ACC is disconnected. Please refer to below figure.

Click go to Settings and select “ACC Settings” as shown.

After enter the ACC setting interface, the following options are displayed:LILLIPUT-7-Inch-Android-Tablet-fig 19

  • Mark 1: The main switch of ACC setting, the current ACC function is off.
  • Mark 2: The switch of close screen function controlled by ACC.
  • Mark 3: Set the screen-off delay time after the ACC is powered off, click to enter the delay setting interface.
  • Mark 4: Set the delay time you need, the current delay is 1 s.
  • Mark 5: The switch of Trigger to shut down function by ACC outage. Current display is: when the ACC is powered off, the tablet will automatically shut down.
  • Mark 6: Set the tablet shutdown delay time.
  • Mark 7: You can set the delay time you need, the current delay shown in the figure is 300s
GPIO Setting

GPIO Tail Lines Instruction
Regarding the definition diagram of GPIO interface, please see the details in Chapter three “Extension Cable Define”.

GPIO Typical Connection
The following figure is a typical connection method of GPIO. In order to ensure communicate normally, please connect the GPIO interface of PC-7108 as shown in the following figure.LILLIPUT-7-Inch-Android-Tablet-fig
20

GPIO Interface

Double-click“ ” to enter the GPIO interface:

  • Name: GPIO pin number.
  • Direction: GPIO state. You can choose GPIO as the input state or output state. As shown in figure “1”.
  • State: HIGH of high level, LOW of low level
  • Operation: Read whether the current mode is high or low, displayed in the status bar.
  • READ_ALL: GPIO is the state of the level at input.
  • SET_ALL_LOW: GPIO is the state of the level at output.

Note!

  1. Each port of GPIO1~8 can be set as as an output or input port separately by GPIO APP or other software measures.
    GPIO must not be directly connected to the power supply without any current limitation if it has been set as an output port, otherwise the interface will be damaged by overcurrent.

  2. When any port of GPIO1~8 is set as an output port and is connected with a inductive load, an diode of at least one ampere rating current is required to parallel
    connected with the external load.

  3. GPIO 0~7 on the software interface correspond to GOIP1~8 in the interface diagram.

Accessories

Standard:LILLIPUT-7-Inch-Android-Tablet-fig 23

1. Extended cable 1 Piece
2. DC12V adapter 1 Piece
3. Mini USB cable 1 Piece
4. User manual 1 Piece

Optional:

1. 3500mAh Li-ion battery 1 Piece
2. Mounting bracket 1 Piece

Trouble Shooting

Problem Problem description Solution





Unable to boot

| ****



Wrong cable connection

| Connect Extended cable with device first, and connect the AC end of DC adapter with DC input port of Extended cable, then the other end of DC adapter connect with power plug socket.



Bad connection

| Check every connection and socket of power source







Display Problem

| The application reaction time is too long and cannot be

activated when clicked.

| ****





Please restart your system if the device has any problem as described.

The screen switching process is delayed and stagnant, causing the screen to fail to switch

smoothly

Not picture on screen




Blurred display

| Check whether there is dust on the surface of the display. If yes, please wipe the dust on the surface with a soft cloth that does not drop cotton chips.

Due to constant effort to improve products and product features, specifications may change without notice.

Documents / Resources

| LILLIPUT 7 Inch Android Tablet [pdf] User Manual
7 Inch Android Tablet, 7 Inch Tablet, Android Tablet, Tablet
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals