CRYSTORAMA 5026-VB-GT-MWP Six Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #5026-VB-GT-MWP
5026-VB-GT-MWP Six Light Chandelier
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 6- Candelabra Base Bulb 40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE The fixture is Damp rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
-
Attach the Center column kit to the fixture body kit using the coupling and finial.
-
Attach the mounting plate onto the outlet box.
-
Decide the desired hanging height and adjust the chain to the correct length.
-
Raise the fixture up and do the wire connection.
Attach the canopy over the mounting plate and secure with fixture loop. -
Put the candle sleeve onto the socket.
-
Dress the crystals as illustrated.
Crystal Sets
A. 6 Sets. (3)14mm + (1)Square + (3)14mm + AS9-2″
B. 12 Sets. (18)14mm
C. 30 Sets. (1)14mm + AS9-2″
D. 6 Sets. (1)Square + (1)14mm + AS9-2″
E. 6 Sets. (13)14mm
WARNING: This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive harm.
For more information go to
www.p65warnings.ca.gov
Part Number
A.| (1)| Mounting Hardware Wire Connector x 2
Mounting Plate x 1
Hex Nut x 1
Screw x 4
---|---|---
B.| (1)| Canopy (W5″ x H1″); XSN5024VBCAN5IN
C.| (2)| Ball Nut
D.| (1)| Fixture Loop; XSN5024VBTOLOOP
E.| (1)| Chain (4mm x 72″); XSN5026VBCHA4MM
F.| (1)| Center Column Kit Loop; XSN5026VBBOLOOP
G.| (1)| Center Column Kit
Threaded Nipple; H12 3/8″
Top Bobeche ; Ø4″, 6pin, 10.3mm center hole
XSN5026VBBOB6IN
Vase ; H8 1/4″.
Column Kit Parts; H3 3/4″
H.| (1)| Fixture Body Kit
Coupling
Distributor Box Cover x 2; Ø5″,10.3mm center hole
Distributor box ; Ø5″ ,10.3mm center hole
I.| (6)| Candle Sleeve; H4 1/8″
XSN5026VBCDL4.125IN
J.| (6)| Bobeche; Ø4″,4pin,10.3mm center hole
XSN5026VBBOB4IN
K.| (6)| 9 1/2″ Arms
L.| (1)| Finial; XSN5024VBFIN