LILLIPUT TK701 7 Inch HDMI Capacitive Touch Monitor User Manual

LILLIPUT TK701 7 Inch HDMI Capacitive Touch Monitor

Important Safety Instructions

The device has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the device should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Please do not place the display screen towards the ground to avoid scratching the LCD surface.
• Please avoid heavy impact.
• Please do not use chemical solutions to clean this product. Just wipe with a clean soft cloth.
• Please do not block any vent hole.
• Please unplug the power if it is not used for a long time or during thunderstorms.
• Please follow the instructions to use the product. Once any issue, further testing must be performed by a qualified technician.

Product Introduction

Highlights

• 10-point capacitive touchscreen (for optional).
• 1000cd/m² high brightness.
• Support multiple video input interfaces : HDMI, VGA, AV.
• Support HDMI 4K 30Hz signal input.
• Support audio input.
• Support Windows XP/7/8/10/11, Android, Linux and MAC OS.
• Support Wall mounting.

Parts of the Device

1. MENU Button
   Press it to display the menu on the screen when power on. Press it to confirm the option selected

2. ▷ Button
   Press it to turn up the volume when power on and no menu; Select options in the menu.

3. ◁ Button
   Press it to turn down the volume when power on and no menu; Select options in the menu.

4. EXIT Button : Return button for the menu.

5. INPUT Button : Switch among of AV 1, AV2, VGA and HDMI signals.

6. POWER Button : Power on/off.

7. Mini USB port : For touch.

8. Micro USB port : For upgrade.

9. HDMI 1.4b input.

10. VGA input.

11. Video input.

12. Video input.

13. AUDIO-INPUT (3.5mm): Audio input under VGA, AV1 and AV2 signal.

14. Earphone jack (3.5mm).

15. Power input : support DC 12-24V.

16. Speaker.

Wall Mounting Demo

Specifications

Menu Setting

Before setting the functions, please make sure the device is connected correctly.

MENU/ ▷ / ◁ Button

• Press MENU button, the menu will pop up on the screen. Then select item as the following sequences via pressing ▷/ ◁ button: PICTURE / FUCTION / AUDIO /VGA / SYSTEM. Press MENU button again to enter into the item you select.
• Press ▷/◁ button to adjust options or values in the selected item. Then press MENU or EXIT button to apply and save the setting.
• When Menu is inactivated, press ▷/◁ button to adjust volume. Then select item as the following sequences via pressing MENU button: Brightness / Contrast /Saturation / Tint / Sharpness. Press ▷/◁ button again to adjust the value in the selected item.

Menu Operation

PICTURE

• Brightness
  Adjust the brightness of the LCD Screen, adjustable range: 0-100.

• Contrast
  Adjust the contrast of image, adjustable range: 0-100.

• Saturation
  Adjust the color intensity, adjustable range: 0-100.

• Tint
  Adjust the hue of the image, adjustable range: 0-100.

• Sharpness
  Adjust the sharpness of image, adjustable range: 0-100.

• Color Temperature
  Options : 6500K / 7500K / 9300K / User.

Note : R/G/B gain and offset only can be adjusted under [User] mode.

FUNCTION

• Scan
  Options : Aspect / Zoom.

• Aspect
  Options : Full / 16:9 / 1.85:1 / 2.35:1 / 4:3 / 3:2.
  Note : Only available under [Scan]-[Aspect] mode.

• Overscan
  To activate or deactivate overscan function.

• Zoom
  Options : ×1.5 / ×2 / ×3 / ×4
  Only available under [Scan]-[Zoom] mode. Users can select zoom ratio according to different needs.

• Freeze
  Activate freeze function to freeze current picture when playing the video.

AUDIO

Volume
Adjust the volume of built-in speaker or earphone. Adjustable range: 0-100.

VGA (Only available under VGA mode)

• Auto
  Select [On], the monitor can automatically adjust the position of the image. Select [Off], users can manually adjust the position of the image.

• Phase
  Adjust internal phase sequence difference. Adjustable range: 0-100.

• Clock
  Adjust internal oscillation frequency when interference occurs. Adjust this item, the image can be compressed or stretched left or right. Adjustable range: 0-100.

• H-Position
  Horizontally adjust the position of the image on the screen. Adjustable range: 0-100.

• V-Position
  Vertically adjust the position of the image on the screen. Adjustable range: 0-100.

SYSTEM

• Language
  Options: English

• OSD Timer
  Options: 10s / 20s / 30s.

• Image Flip
  Options: Off / H / V / H/V.

• Back Light
  Adjustable range: 0-100.

• Reset
  If there is any problem unknown, please select [On]. The monitor will restore factory defaults.

Accessories

Standard:

1. DC 12V 2A power adaptor 1pcs
2. HDMI A to A cable 1pcs
3. VGA cable 1pcs
4. USB cable for touch (for optional) 1pcs
5. Audio input cable 1pcs
6. AV input cable 2pcs
7. Fixed screw 4pcs
8. User manual card 1pcs

Troubleshooting

• Only black-and-white display:
  Check whether the color saturation is properly set or not.

• Power on but no pictures:
  Check whether the cables of AV, HDMI, and VGA are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.

• Wrong or abnormal colors:
  Check whether the cables are correctly and securely connected or not. Broken or loose pins of the cables may cause a bad contact.

• Other problems:
  Please press MENU button, choose [SYSTEM]→ [Reset]→[On].

Note : Due to constant effort to improve products and product features, specifications may change without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>