LILLIPUT TK1560 China 15.6 Inch Touch Screen Monitor User Manual

LILLIPUT TK1560 China 15.6 Inch Touch Screen Monitor

Important Safety Instructions

The device has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipment, the device should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

• Please do not place the display screen towards the ground to avoid scratching the LCD surface.
• Please avoid heavy impact.
• Please do not use chemical solutions to clean this product. Simply wipe with a clean soft cloth to maintain the brightness of the surface.
• Please do not block any vent hole.
• Please follow the instructions and trouble-shooting to adjust the product. Internal adjustments or repairs must be performed by a qualified technician.
• Please keep user guide for future reference.
• Please unplug the power if long-term no-use, or thunder weather.

Product Description

Main Features

• 10-point capacitive touch screen
• 1000cd/m² high brightness
• Support multiple video input interfaces: HDMI, VGA, AV
• Support audio input
• Support HDMI 4K 30Hz
• Support Windows XP/7/8/8.1/10, Android, Linux and MAC OS

Rear Case

1. INPUT Button: Switch among of AV, VGA and HDMI signals.
2. MENU Button: Press it to display the menu on the screen when power on. Press it to confirm the option selected.
3. ◁ Button : Press it to decrease volume when power on; Select options upward in the menu.
4. Button: Press it to increase volume when power on; Select options downward in the menu.
5. EXIT Button: Return button for menu
6. FN Button: Can be set by [Menu]-[System]-[FN Conf.]
7. Power Button: Power on/off
8. UPGRADE Interfaces: Only for upgrade firmware
9. HDMI 1.4b Input
10. VGA Input
11. USB Type-A Interface: Only for touch function
12. Video Input (RCA ports)
13. Audio Input (3.5mm)
14. Earphone Jack (3.5mm)
15. Power Input: DC 12-24V
16. Dual Speakers

Supported Mounting Ways

Wall Mount

Menu Setting

Before setting the functions, please make sure the device is connected correctly.

MENU/ ▷ / ◁ Button

• Press MENU button, the menu will pop up on the screen. Then select item as the following sequences via pressing ▷/◁ button: PICTURE / MARKER / FUCTION / VGA / AUDIO / SYSTEM. Press MENU button again to enter into the item you select.
• Press ▷/◁ button to adjust options or values in the selected item. Then press MENU or EXIT button to apply and save the setting.
• When Menu is inactivated, press ▷/◁ button to adjust volume. Then select item as the following sequences via pressing MENU button: Brightness / Contrast /Saturation / Tint / Sharpness and Exit. Press ▷/◁ button again to adjust the value in the selected item.

Menu Operation

PICTURE

Note: Only available when under [User] mode to adjust R/G/B gain and offset.

Green Gain| 0-255
Blue Gain| 0-255
Red Offset| 0-511
Green Offset| 0-511
Blue Offset| 0-511

• Brightness
  Adjust the brightness of the LCD Screen, adjustable range: 0-100.

• Contrast
  Adjust the contrast of image, adjustable range: 0-100.

• Saturation
  Adjust the saturation, adjustable range: 0-100.

• Tint
  Adjust the hue of the image, adjustable range: 0-100.

• Sharpness
  Adjust the sharpness of image, adjustable range: 0-100.

• HDR
  Options: Off / HDR10_300 / HDR10_1000 / HDR10_10000 / HLG.
  After the HDR activated, the display will show a wider dynamic range of brightness,so that the brighter and darker details can be seen more clearly. Improving the overall picture quality Effectively.
  Note: Only available under HDMI mode. It doesnt work for VAG and AV.

• Color Temperature
  Options: 6500K /7500K / 9300K / User. The standard color temperature is 6500K.
  Note: Only available when under [User] mode to adjust R/G/B gain and offset.

MARKER

• Center Marker
  Options: Off/On. When [On], the screen will display “+” Symbol.

• Safety Marker
  Options: Off / 95% / 93% / 90% / 88% / 85% / 80%.

FUNCTION

3:2

| Only available under [Scan]-[Aspect] mode
Display scan| Fullscan / Overscan / Underscan| Only available under [Scan]-[Aspect] and [Zoom] mode
Zoom| X1.5 / X2 / X3 / X4| Only available under [Scan]-[Zoom] mode
Image Flip| Off / H&V / H / V
Freeze| Off / On

• Scan
  Options: Aspect / Pixel To Pixel / Zoom.
  Note: Under [Pixel To Pixel] mode, Aspect, Display scan and Zoom cannot be adjusted. Under [Zoom] mode, Aspect cannot be adjusted.

• Aspect
  Options: Full / 1.85:1 / 2.35:1 / 4:3 / 3:2.
  Note: Only available under [Scan]-[Aspect] mode.

• Display scan
  Options: Fullscan / Overscan / Underscan.

• Zoom
  Options: X1.5 / X2 / X3 / X4
  Only available under [Scan]-[Zoom] mode. Users can select zoom ratio according to different needs.

• Image Flip
  Options: Off / H&V / H / V

• Freeze
  Options: On / Off.
  Activate freeze function to freeze current picture when playing the video.

VGA

• Auto
  Select [On], the monitor can automatically adjust the position of the image. Select [Off], users can manually adjust the position of the image.

• Phase
  Adjust internal phase sequence difference. Adjustable range: 0-100.

• Clock
  Adjust internal oscillation frequency when interference occurs. Adjust this item, the image can be compressed or stretched left or right. Adjustable range: 0-100.

• H-Position
  Horizontally adjust the position of the image on the screen. Adjustable range: 0- 100.

• V-Position
  Vertically adjust the position of the image on the screen. Adjustable range: 0- 100.
  Note: Only available under VGA mode.

AUDIO

• Volume
  Adjust the volume of built-in speaker or earphone. Adjustable range: 0-100.

• Mute
  Stop any audio output.

SYSTEM

Flip / Mute
Reset| Off / On

• Language
  Options: English / Chinese.

• OSD Timer
  Options: 10s / 20s / 30s.

• OSD Trans.
  Adjust the transparency of OSD. Options: Off / Low / Middle / High.

• Backlight Mode
  Manual: Change backlight as required; Auto: Adjust the backlight according to environment.

• Back Light
  Adjustable range: 0-100.

• FN Conf.
  Set shortcut button function, options: Center Marker / Display scan / Scan /Aspect / Freeze / HDR / Image Flip / Mute. （Default: center mark）

• Reset
  If there is any problem unknown, please select [On]. The monitor will restore factory defaults.

Parameters

**Accessories

**

Standard

1. 12V/3A DC Adapter 1 piece
2. HDMI A/A cable 1 piece
3. VGA cable 1 piece
4. USB A/A cable (for touch) 1 piece
5. Audio / Video Cable 1 pair
6. Fixed Screws 4 piece
7. Cable Clamp 4 piece

Trouble Shooting

• Only black-and-white display:
  Check whether the color saturation is properly setup or not.

• Power on but no pictures:
  Check whether the cables of AV, HDMI, and VGA are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.

• Wrong or abnormal colors:
  Check whether the cables are correctly and securely connected or not. Broken or loose pins of the cables may cause a bad contact.

• Other problems:
  Please press MENU button, choose [SYSTEM]→ [Reset]→[On].

Note: Due to constant effort to improve products and product features, specifications may change without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>