LILLIPUT China 10.1 Inch Full HD Capacitive Touch Monitor Instruction Manual

June 3, 2024
LILLIPUT

LILLIPUT China 10.1 Inch Full HD Capacitive Touch Monitor

LILLIPUT-China-10-1-Inch-Full-HD-Capacitive-Touch-Monitor-
PRODUCT

IMPORTANT SAFETY INSTRUCTIONS

The device has been tested for conformance to safety regulations and requirements and has been certified for international use. However, like all electronic equipment, the device should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and minimize the risk of damage to the unit.

  • Please do not place the display screen towards the ground to avoid scratching the LCD surface.
  • Please avoid heavy impact.
  • Please do not use chemical solutions to clean this product. Simply wipe with a clean soft cloth to maintain the brightness of the surface.
  • Please do not block any vent hole.
  • Please follow the instructions and trouble-shooting to adjust the product.
  • Internal adjustments or repairs must be performed by a qualified technician.
  • Please keep user guide for future reference.
  • Please unplug the power and remove the battery if long-term no-use, or thunder weather.

PRODUCT DESCRIPTION

Overview

The 10.1″ monitor utilizes a full HD 1920*1200 LED-backlit LCD panel which is housed in a lightweight case. It is compatible with HDMI and VGA signals which can be controlled by USB touch. The monitor is widely used in various environments, i.e. commercial public display, external screens, industrial operations, and so on.

Main Features

  • Supports multiple video input interfaces: HDMI, VGA
  • High resolution of 1920×1200 pixels
  • High contrast: 1000:1
  • Adopt the unique Glass+Glass technology
  • A capacitive touch screen is optional
  • F1&F2 user-definable buttons to custom auxiliary functions as a shortcut
  • Individual adjustments of Brightness, Contrast, Brightness, Saturation, Sharpness Color Temp, etc.
  • Support Scan, Check Field, Zoom, Freeze, and Image Flip functions
  • Equipped with 75mm VESA holes
  • Compatible with sunshades, that can be used under sunlight
  • Built-in high-level components to support 7 to 24V power supply voltage
  • Working safely with the ultra-low current in any situation

CONNECTIONS AND CONTROLS

LILLIPUT-China-10-1-Inch-Full-HD-Capacitive-Touch-Monitor-
FIG-1LILLIPUT-China-10-1-Inch-
Full-HD-Capacitive-Touch-Monitor-FIG-2

  1. Power Indicator
  2. The green light is powered on.
  3. Menu Dial
  4. FN function: Dial left or right to adjust the volume when powered on.
  5. Menu function: Press to activate the menu displayed on the screen when powered on.
  6. Option function: Select the option by dialing to the left or right.
  7. Confirm function: Press to confirm after the option is selected.
  8. Exit
  9. Return.
  10. Exit.
  11. F1,F2 User-definable Buttons
  12. F1: Scan.
  13. F2: Mute.
  14. /Input
  15. Power.
  16. Switch input signal. after power on.
  17. VGA Input Interface
  18. Video input from a VGA device.
  19. Mini USB Port
  20. Only for system upgrade
  21. HDMI Input Interface
  22. Video and audio input from an HDMI device.
  23. USB Port
  24. Only for the touch function
  25. Earphone Jack
  26. 3.5mm headphone socket. The internal speaker circuit will automatically mute when the earphone jack is connected.
  27. DC Power Input
  28. DC In socket for connecting power supply.

Before setting the functions, please make sure the device is connected correctly.

Shortcut Keys

Dial: Dialing to the left or right when powered on, the volume will appear at the bottom of the screen. Then press the dial to switch between volume, brightness, contrast, saturation, tint, sharpness, and exit. Users can adjust the value of the selected option via dial.

F1-F2

Slide and press the dial to select System->F1&F2 configuration. Slide the dial to select the option and press again to confirm it.The user-definable functions can be customized: Scan, Aspect, DSLR, Freeze, Image flip, Mute and Check field

Menu Operation

When power on, press the dial on the device to activate the menu setting. Dial left or right to choose menu option and press it to confirm. The selected one will be green highlighted.

Picture

ITEMS OPTIONS
Brightness 0 – 100
Contrast 0 – 100
Saturation 0 – 100
Tint 0 – 100
Sharpness 0 – 100
Color Temp. 6500 K/7500K/9300K/USER
--- ---
Red gain 0 – 255


Note: Only available when under “User” mode to choose the color value needed.

Green gain| 0 – 255
Blue gain| 0 – 255
Red offset| 0 – 511
Green offset| 0 – 511
Blue offset| 0 – 511

  • Brightness

Adjust the general brightness of the LCD. For example, if the user is outside in bright conditions, increase the LCD brightness to make it easier to view.

  • Contrast

Increases or decreases the range between the bright and dark areas of the image. High contrast can reveal detail and depth in the image, and low contrast can make the image appear soft and flat.

  • Saturation

Adjust the color intensity. Turn the knob right to increase the color intensity and turn left to decrease it.

  • Tint

**** Use this setting to choose the tint from 0 to 100.

  • Sharpness

**** Increase or decrease the sharpness of the image. Increase the sharpness to make the image clearer when the image sharpness is insufficient.

  • Color

** Adjust the color temperature to make the image warmer (Yellow) or colder (Blue). Increase the value to make the image be warmer, and decrease the value to make the image be colder. Users can use this function to strengthen, weaken or balance the image color according to requirements. The standard white light color temperature is 6500K.
Note: Only available under “User” mode to adjust Color Bias and Gain.**

Function

ITEMS OPTIONS
Scan Aspect, Pixel to Pixel, Zoom
Aspect Full/16:9/1.85:1/2.35:1/4:3/3:2/1.3X/

2.0X/2.0X MAG

| Only available under

Aspect Mode.

Display Scan| Fullscan, Underscan, Overscan| Only available under

Aspect and HDMI Mode.

Check Field| Off, Mono, Red, Green, Blue
Zoom| X1.5/X2/X3/X4| Only available when the Scan

is under Zoom mode.

Freeze| Off, On

  • Scan

Use this menu option to choose Scan mode. There are three modes preset.

  • Aspect:

Select Aspect under Scan option, then use Aspect option to switch between several aspect ratio setting. Users can select related aspect ratio according to different signal input to meet the best viewing experience.

For example: In 4:3 mode, images are scaled up or down to fill the maximum 4:3 portion of the screen. In 16:9 mode, images are scaled to fill the entire screen.

  • Pixel to Pixel

The pixel to pixel is a monitor set to 1:1 pixel mapping with native fixed pixels, which avoids loss of sharpness due to scaling artifacts and normally avoids incorrect aspect ratio due to stretching.

  • Zoom

The image can be enlarged by X1.5/X2/X3/X4 ratios. To select the “Zoom” under Scan, choose the times under Zoom option which underneath the Check Field option.

  • Freeze

Freeze or unfreeze the current image on the screen.

Audio

ITEMS OPTIONS
Volume 0-100
Mute Off, On
  • Volume

Adjust the volume for the built in speaker and earphone jack audio signal.

  • Mute

Open or close the audio.

PC (Only for connecting to the computer)

ITEM OPTIONS
Auto On, Off
Phase 0-100
Clock 0-100
H-position 0-100
V-position 0-100

Note: Only available under PC mode.

System

ITEM OPTION
Language English/中文
OSD timer 10s, 20s, 30s
Image flip Off, H/V, H, V
Back light 0-100
F1 Conf. See the details as below.
F2 Conf. See the details as below.
Power state Memory boot, Power down, Power up
Reset Off, On
  • Language

Switch between English, Chinese.

  • OSD Timer

It supports setting the exit time of OSD. For example, the OSD will be closed automatically after 10s if without any operation when selected 10s. It can be selected among 10s, 20s, and 30s.

  • Image Flip

Use this setting to activate or deactivate the Image Flip function. It has three modes to be chose: H/V, H, V

  • Back Light

Adjust the back light of display panel from 0-100.

  • F1 &F2 Configuration

Select the user-defined shortcut button.

  • Power State

Support Memory boot, power down and power up modes.

  • Reset

If there is any problem unknown, press to confirm after selecting. The monitor will return to the default setting.

PARAMETERS

Display Screen 10.1 inch 8bits
Physical Resolution 1920×1200
Brightness 320cd/㎡
Contrast 1000:1
Viewing Angle 175°/175° (H/V)
Input Signal HDMI, VGA
Touch Function Capacitive (Optional)
Input Voltage DC 7-24V
Power Consumption ≤ 10W
Operating Temperature 0℃~50℃
Storage Temperature -20℃~60℃
Dimension(LWD) 252×157×25mm
Weight 535g

ACCESSORIES

Standard

  • 12V DC Adapter: 1pc
  • VGA Cable: 1pc
  • HDMI A/A: 1pc
  • Manual: 1pc
  • USB Cable (For touch function): 1pc

Optional

  • 75MM VESA Fold Mount: 1pc
  • Sunshade: 1pc

TROUBLESHOOTING

Only black-and-white display:

Check whether the color saturation is properly set up or not.

  • Power on but no pictures:

Check whether the cables of HDMI, and VGA are correctly connected or not. Please use the standard power adapter coming with the product package. Improper power input may cause damage.

  • Wrong or abnormal colors:

Check whether the cables are correctly and properly connected or not. Broken or loose pins of the cables may cause a bad connection.

  • When on the picture shows size error:

Press “Menu → Display → Underscan” to zoom in/out pictures automatically when receiving HDMI signals

  • Other problems:

Please press the button and choose “Menu→System→ Reset →ON”.

Note: Due to constant efforts to improve products and product features, specifications may change without notice.

Documents / Resources

| LILLIPUT China 10.1 Inch Full HD Capacitive Touch Monitor [pdf] Instruction Manual
China 10.1 Inch Full HD Capacitive Touch Monitor, HD Capacitive Touch Monitor, China 10.1 Inch Full Touch Monitor, 10.1 Inch Full Touch Monitor, Full Touch Monitor, Monitor
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals