GE 93123570 Direct Wire 59-Watt EQ 96-in Cool White Linear Type B LED Tube Light Bulb Instruction Manual
- June 9, 2024
- GE
Table of Contents
GE 93123570 Direct Wire 59-Watt EQ 96-in Cool White Linear Type B LED
Tube Light Bulb
INSTALLATION INSTRUCTION
Steps 1-2
-
Ensure power is off to the luminaire by disconnecting the supply voltage.
-
Remove all fluorescent lamps and the ballast, clipping the ballast leads wires about 6 inches away from each lamp holder.
Steps 3-7 -
If two wires come from an existing lamp holder (rapid start type), these two wires should be wired or shunted together.
-
Connect the recommended fuse and fuse holder (not supplied) to the black (hot) wire from the mains,
-
Connect all the lamp holder leads on one side altogether and connect to the other side of the recommended fuse with a suitable wire.
-
Connect together all of the lamp holder leads on the other side of the fixture and connect to the white or neutral wire from the mains
-
Replace the ballast/wiring area cover, and ensure no wires are pinched between the cover and fixture.
Steps 8-10 -
Install the warning label in an easy-to-see location to ensure the user understands the system now uses LED Type B double-ended tubes, and that the use of fluorescent lamps may result in damage or injury.
-
Install Type B double-ended tubes.
-
Re-apply power to the fixture and ensure proper operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>