PHILIPS BY480P GentleSpace Gen 3 LED High-Bay Instruction Manual
- June 9, 2024
- Philips
Table of Contents
PHILIPS BY480P GentleSpace Gen 3 LED High-Bay
WHAT IS IN THE BOX
SPECIFICATION
DIMENSION
INSTALLATION
It is required to use special Gripple suspension set No. 3 with different then express fastener system
Aisle orientation for High Rack Optic (HRO)
Mounting bracket set content
16Nm
tightering torgue for all Mounting Bracket screws in standard applications
The following versions of the luminaires should be positioned so that prolonged staring into the luminaire at a distance closer than the indicated value in the table is not expected!
All other standard luminaire types classified to Risk Group 1.
Inrush current
LED130S,
LED250S, LED170S LED350S
Electrical characteristics
Imax (A) 5,1 15,3
Tref (μs) 2300 61
MCB No. of luminaire max.
B-10 A| 8| 5
B-16 A| 12| 8
C-10 A| 12| 8
C-16 A| 20| 13
The luminaire shall be installed by a qualified electrician and wired in
accordance with the latest IEE regulations or the national requirements.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person
If the external flexible cable or cord of this luminaire is damaged, it shall
be exclusively replaced by the manufacturer or his service agent or similar
qualified person in order to avoid hazard.
During the installation or maintaining the luminaire please use gloves to
avoid spots on the cover
To remove dirt spots use the following: – Dust: use micro fiber cloths
To get an overview of all spare parts for a luminaire,please refer to detailed instructions in the service manual available via the Signify Service tag apps (Android and ios).
Disconnect before servicing
- Luminaire has basic insulation between Low Voltage supply and control conductors.
- The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembledbolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
- This product contains a light source of energy efficiency class: see table or label.
444316026312
09/2022 Signify Holding. All rights reserved
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>