Hanwha Vision SBO-126B Bullet Backbox Instruction Manual
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBO-126B Bullet Backbox
Bullet Backbox
SBO-126B
Package
Product Overview
This product is an adapter used in installation that provides a space to
install a bullet camera and connect cables (for compatible models, please
visit our website).
Installation Precautions
- Install the product in a place that can sufficiently withstand at least 4 times the weight of the SBO-126B camera.
- If installing it outdoors, use fastening parts made of stainless steel (screws enclosed are made of stainless steel).
Installation
-
Fix the camera product you purchased using the screws attached to the top of the case.
At this time, take careful note of the direction of the assembly bump. -
Place the case bottom on the desired location and fix it. You can use any of the 6 fixing screw holes you wish.
-
When laying the cable through the center of the back box, insert the cable through the screen in the central section before fixing the case bottom.
This product supports a single type, double type or octagon type gang box. -
Fix the case bottom firmly and hook the safety strap connected to the top cover to the arrow-shaped clamp.
With the cable firmly hung, connect the cable. -
After completing the cable connection, fasten the 3 screws that connect the case top to the case bottom.
Using the PAN/TILT fixture, adjust the camera to face in direction you want to monitor (refer to the camera manual).
Product Outline
Product Specifications
- Weight : 330g
- Material : ALUMINIUM
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
PT01-005298B
Documents / Resources
|
Hanwha Vision SBO-126B Bullet
Backbox
[pdf] Instruction Manual
SBO-126B, SBO-126B Bullet Backbox, Bullet Backbox, Backbox
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>