SHENZHEN FISE TECHNOLOGY HOLDING CO LTD G2PLUS Smart Watch User Manual
- June 1, 2024
- SHENZHEN FISE TECHNOLOGY HOLDING CO LTD
Table of Contents
SHENZHEN FISE TECHNOLOGY HOLDING CO LTD G2PLUS Smart Watch
Product Information
Specifications:
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power: 120V, 60Hz
- Material: Stainless Steel
Product Usage Instructions
Setup:
Place the product on a flat, stable surface near a power outlet.
Power On:
Plug the product into a 120V, 60Hz power source.
Operation:
Follow the control panel instructions to set the desired settings.
Cleaning:
Ensure the product is unplugged before cleaning. Use a damp cloth to wipe
the exterior.
Frequently Asked Questions (FAQ):
-
Q: How do I adjust the temperature settings?
A: Use the temperature control knob on the front panel to adjust the temperature settings. -
Q: Can this product be used for outdoor purposes?
A: No, this product is designed for indoor use only. -
Q: What should I do if the product malfunctions?
A: Unplug the product immediately and refer to the troubleshooting section in the user manual or contact customer support.
Notes:
- The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in certain versions of software.
- Please charge this product with the configured cable for no less than 2 hours before using it.
- Before using the product, you need to connect the APP synchronization time and set your personal information.
- This product supports IP68 rank waterproof, not suitable for deep sea diving. Hot water, tea and other corrosive liquids are destructive to the watch, and will not be able to enjoy the product warranty and free maintenance services.
How to wear
Please wear the device on your wrist correctly, about one finger from the
carpal and adjust it to comfortable position.
Tip: Please wear the device a bit little tighter when heart rate
monitors.
How to download & connect to APP
Long press the button to power on, slide down from the top from watch face home page, go to “Settings–About–Download QR code” , scan QR code to download and install “GIroryFit” APP. You can also scan below “GIroryFit” QR code to download and install “GiroryFit” APP.
Go to app “GIroryFit” and select “Add Device” on the device page, then follow the instructions on the screen.
How to connect to BT call feature:
-
Android phone: After the APP and the watch are successfully bound, it will automatically prompt whether to pair with the audio Bluetooth KW212 (ID-xxxx), please click to pair it
directly. -
IOS phone (IOS model system version 13 and above supports one-key connection prompt) and some Android mobile phones: After the APP is successfully bound to the watch, when asidio Bluetooth K212 (ID-oe Ock to pair e audio setooth 212 (D-year and the phone function can be used normally only after the pairing is successful.
Tips:
- Please upgrade the app to latest version to get a better experience.
- Andorid 5.0 and IOS 9.0 or above system are compatible with the App.
- For the first time connection with iphone, “Pair” reminder will pop-up, click to pair, then incoming calls and instant messages will be pushed.
- For the first time connection with android, “Permissions” reminder will pop-up, please follow up the guidance and allow permissions to ensure all functions working properly.
- To connect successfully, please turn on mobile phone’s bluetooth, GPS and network.
- If the device cannot be searched or connected during use, please reset or turn off the watch to try again.
Operating Instructions
- Setting page: Slide down from main page, go to shortcut page.
- Information page: Slide up from main page.
- Main Menu Page: Slide right from the main page. You can change the menu styles by double click on button or change on setting paqe.
- Shortcut page: Slide left from main page.
- Quick access to change watch faces: Long press the watch face on main page, slide left or right to choose watch faces.
- Power on/off: Press and hold the button for 5 seconds on the dial interface.
- Normal operation: press the button to return back to previous page; On main page, press the button to turn on/off the screen.
- Rotate button function: It can be realized by rotating the button to slide up and down. to be able to switch different menu styles, and switch to different watch face. when it is in celluar menu style, rotate button can zoom in or zoom out the display area.
Function
Workout: 100+ sport modes are supported. More details can be viewed in APP.
Status: Record the number of steps, distance, and calories for the day. More detailed information analysis and data records can be viewed in the APP.
SOS: You can add contacts in “SOS call” on the APP side.
Phone:
Dial: Connect the phone to dial out, you can make a call on the watch.
Call History: Record your call history.
Contacts: Contacts can be added synchronously on the APP.
Switch: BT Bluetooth switch, control phone call and media audio function.
Heart rate monitoring: Measure the current heart rate value; the watch
can record and display the heart rate value for 24 hours throughout the day,
and automatically monitor
the heart rate every 10 minutes. More detailed information analysis and data
records can be viewed in the APP. (The value is for reference only and cannot
be used as a medical basis).
Sleep: Record and display the total sleeping hours, deep sleep and light sleep of the previous night. More detailed information analysis and data records can be viewed in the APP.
Blood pressure: Test the current blood pressure value, more detailed information analysis and data records can be viewed in the APP. (The value is for reference only and cannot be used as a medical basis).
Blood oxygen: Test the current blood oxygen value; it monitors blood oxygen throughout the day, more detailed information analysis and data records can be viewed in the APP. (The value is for reference only and cannot be used as a medical basis).
Weather: Display the current weather conditions and the weather for the
next 3 days.The weather information will be displayed once connecting to the
APP. If the connection is
disconnected for a long time, the weather information will not be updated.
Music control: After connecting to the mobile phone, you can click “play/pause/previous/next song” on the smart watch to control the music from mobile phone, and the volume can be adjusted.
Message: Message reminders, sync notification push from your phone, save 8 latest message reminders.
Alarm: 8 alarm reminders can be set, the watch will vibrate and the screen will be bright.
Raise to wake: When the screen is off, raise your wrist 90 degrees/180 degrees and the screen will light up.
Pressure: Measure the current pressure, the watch can record and display the pressure value 24 hours a day. More detailed information analysis and data records can be viewed in the APP. (Values are for reference only and cannot be used as medical basis).
Mood: Test the current mood. More detailed information analysis and data records can be viewed in the APP. (The values are for reference only and cannot be used as medical basis).
Respiratory rate: Measure the current respiratory rate. (Values are for reference only and cannot be used as medical basis).
Breathing training: You can set the breathing rhythm and time, and follow the training prompts to complete the breathing training.
Voice assistant: Click on the screen, according to the voice assistant “word” of phone (such as: Xiaoai, Xiaoyi) to wake up the phone function. ( (note: the watch needs to be connected to the phone with Bluetooth to use it).
Games: Bird game. Help kill your spare time.
Other functions: Flashlight/Timer/Find phone/Calculator
Setting: Dail/Menu view/ Brightness/Sound settings/About/Power off/Reset/App Download/Password lock.
Sound settings:
Turn off the entertainment sound: play music/swipe Douyin/watch WeChat Moments
videos, watch TV/movies, the watch will not play sound, but the phone will
play sound. Turn on the entertainment sound: play music/swipe Douyin/watch
WeChat Moments videos, watch TV/movies, the watch will play sound, and the
phone will not play sound. (The main control is
the third-party playing sound) Mute: Control the watch’s incoming call sound
switch.
Other functions
Find watch, 12/24h time system, sedentary reminder, low battery reminder,
incoming call reminder, online dial/custom dial, unit setting, raise to wake,
female menstrual period reminder, goal achievement reminder.
Charging
- Attach the charging cable to the watch charging port, ensuring the metal pins fully connected.
- Please use the correct charging adapters which are 5V 0.5A above.
Note: If smart watch can not be powered on after being left unused for long time, please clean up the charging metal pins to make sure connecting well, Avoid sweat or moisture residue.
Warranty
- One year warranty for default hardware defectives, half of year for battery and charging cable.
- Below reasons cause to defectives are not included in free warranty service:
- Personal assemble or disassemble.
- Falling damage during use.
- All man-made damage or due to the third party’s fault, improper use(such as: water in the smart watch, external force shattering, scratch during use etc.
- Please provide a warranty card with the details filled when request for after selling service.
- Please contact with direct dealers for warranty service.
- Please note all functions of the product are based on physical objects.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in
portable exposure condition without restriction.
Warranty Cetificate
Client Info
Product Type| | Vendor| (Stamp)
Client Name| | Contact Info|
Vendor’s Contact| | Purchase Date|
Product IMEI Code|
Client’s Address|
Warranty Record
Date| Problems| Diagnosis| More Info
| | |
| | |
| | |
| | |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>