AcuityBrands P6300 Trac Adapter Installation Guide

AcuityBrands P6300 Trac Adapter

Product Information

The Juno Trac Adapter is a component that allows you to install fixtures onto Juno Trac systems. It is designed to be easy to install and compatible with various sizes and styles of Juno Trac adapters.

Installation Instructions

Fixture Installation

1. Find the latch and the polarity line on the adapter box.
2. Align the latch and polarity line as shown in Fig. 1.

Fig. 1: Latch and Polarity Line Alignment

1. Insert the adapter box into the track.
2. Pull down the latch while rotating the adapter box 90 degrees clockwise (Fig. 2).

Fig. 2: Rotating the Adapter Box

1. The latch should snap into place between the extrusion rails, with the arrows on the latch pointing towards the polarity line(Fig. 3).

Fig. 3: Final Position of the Latch

Second Circuit Positioning:

1. Raise the contact marked P (on switch side) by inserting a thin screwdriver blade under the contact and pulling it up into position (Fig. 4).

Fig. 4: Raising the Contact

1. Insert the contact support (supplied with 2-circuit Trac section) by tilting and snapping it into position under the P contact (Fig. 5).

Fig. 5: Inserting the Contact Support

1. Ensure that the contact support is securely snapped and locked into position (Fig. 6).

Fig. 6: Final Position of the Contact Support

Troubleshooting

If you encounter any issues with the installation or operation of the fixture, refer to the following troubleshooting guide:

• Ensure track has power

• Ensure the power switch on the track fixture adapter is in the On
  position

• Ensure fixture is installed correctly, with the arrows on the latch pointing towards the polarity line (refer to Fig. 3)

P Contact adjusted incorrectly| P contact bent from adjusting incorrectly
Bent contact from adjusting the wrong contact| Ensure P contact isn’t bent from adjusting incorrectly (refer
to Fig. 8) Follow the proper adjustment method shown in Fig. 4, 5, and 6

Note: The correct circuit position and compatibility information is provided in Fig. 8 and Fig. 9.

Fig. 8: Correct Circuit Positions Fig. 9: Move Switch to On Position

Make sure to follow these instructions carefully to ensure proper installation and operation of your Juno Trac Adapter.

WARNING: Read all of these installation instructions before installing.

SAVE THESE INSTRUCTIONS

FIXTURE INSTALLATION

1. Step 1 Find the latch and the polarity line. Align parts as shown and insert the adapter box into the track. (Fig. 1)

2. Step 2 Pull down the latch while rotating the adapter box 90 degrees clockwise. (Fig. 2)
   

3. Step 3 Final Position: Latch snaps into place between extrusion rails. Arrows on latch point toward the polarity line. (Fig. 3)

SECOND CIRCUIT POSITIONING

1. Step 1 Raise the contact marked “P” (on switch side) by inserting a thin screwdriver blade under contact. Pull up into position as shown. (Fig. 4)
   

2. Step 2 Insert contact support (supplied with 2-circuit Trac section) by tilting and snapping into position under the “P” contact as shown. (Fig. 5)

3. Step 3 Ensure contact support is snapped and locked into position. (Fig. 6) Follow instructions for inserting into track.
   

• Juno Trac adapter size and style may vary.

TROUBLESHOOTING

fixture adapter is in the “On” position, see Fig. 9
Fixture installed incorrectly| Ensure fixture is installed correctly, with the arrows on the latch pointing towards the polarity line as shown in Fig. 3
Ensure contacts aren’t bent from installing the fixture incorrectly, see Fig. 7
“P” Contact adjusted incorrectly| Ensure “P” contact isn’t bent from adjusting incorrectly, see Fig. 8
Bent contact from adjusting the wrong contact, see Fig. 4, 5, & 6 for proper adjustment method

One Lithonia Way Conyers, GA 30012
1-800-705-SERV (7378)
www.acuitybrands.com
©2020 Acuity Brands Lighting, Inc.
P6300
Rev 10/2022

References

• Acuity Brands | Lighting, Controls, and Building Management Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>