SILVERSTONE MILO 12 Slim & Compact Mini-ITX Enclosure Installation Guide

MILO 12
Slim & compact Mini-ITX enclosurewww.silverstonetek.com

Accessory Content

Mounting for fans| | Riser card mounting screws|
---|---|---|---
Foot pads| | PCIe Riser card|
Mounting for motherboard| | Vertical orientation stand|
Mounting for 2.5″ SSD| | Mounting for PSU|
Mounting for slim ODD| | Warranty card|
Cable ties| | |

Installation Guide

Follow the direction of the arrow to remove all four panels

Remove front panel

Install PSU

1. Install motherboard I/O shield
2. Install motherboard then secure with screws
   *We recommend connecting the motherboard power and front I/O cables

Install 2.5″ SSD

Install front panel

Install 9.5mm slim ODD
Please skip this step if 9.5mm slim ODD is not to be installed

Connect the PCIe riser card to the motherboard, secure with screws

1. Remove PCI slot covers
2. Install graphics card
   If the graphics card is too wide causing difficulties when installing, the beam on the top chassis can be removed in order to fit the graphics card in

Install the all four panels back to complete installation

Install foot pads for vertical or horizontal orientation

Optimal Cooling Solution

Installing an 80mm fan at the front can improve heat dissipation by drawing out the heat accumulated for 3-fan graphics cards

If the installed graphics card has an open design, installing a 140mm fan on the front and back can help extract air to improve heat dissipation

Component Restrictions

CPU cooler limitations
CPU cooler height limit: 77mm; Cooler is allowed to protrude the edge of the motherboard by 12mm

PSU depth limitation
PSU depth limit is 160mm
If 9.5mm slim ODD is to be installed, PSU form factor is limited to SFX or SFX-L

GPU length limitations
Graphics card length limit is 345mm
If an 80mm fan is installed at the front, the overall length of GPU and the thickness of the fan comes to 355mm.
Thickness limit is 160mm (including the height of the connectors when plugged in)
Front of PCB thickness is 62mm
Back of PCB limit is 6mm (thickness of the graphics card PCB is 1.6mm)

UPGRADES & MAINTENANCE

Dust filter removal
Dust filters are located at the left and right side panels, please clean directly with a vacuum cleaner

Warranty terms & conditions

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
   a. Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.
   b. Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
   c. Product is not modified or components replaced resulting in out of spec. operation.
   d. Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.
   Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com. for the latest updates.

Additional info & contacts
For North America usasupport(at)silverstonetek.com
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. http://silverstonetek.com/contactus.php

For Australia only support(at)silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply)

For Europe support.eu(at)silverstonetek.de
For China support(at)silverstonetek.com.cn
For Japan support_jp(at)silverstonetek.co.jp
For all other regions support(at)silverstonetek.com

Please refer to SilverStone website for latest specifications updates.

SilverStone Technology Co., Ltd.
www.silverstonetek.com
support@silverstonetek.com

References

• 無標題文件
• Support.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>