Lorelli 1005056 0001 Zippy Children Tricycle Instruction Manual

: June 4, 2024
: lorelli

Table of Contents

1005056 0001 Zippy Children Tricycle
( SAFETY REQUIREMENTS )
( CLEANING AND CARE )
( ASSEMBLY )
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZIPPY
children tricycle

Lorelli 1005056 0001 Zippy Children Tricycle

MANUAL INSTRUCTION
designed in EU Lorelli 1005056 0001 Zippy Children Tricycle -
fig

1005056 0001 Zippy Children Tricycle

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device. SRB/HR/ME/BIH Lorelli 1005056 0001 Zippy Children Tricycle -
fig1

IMPORTANT! KEEP IT FOR FUTURE REFERENCE! READ CAREFULLY!

( SAFETY REQUIREMENTS )

WARNING! Do not leave the child unattended!
WARNING! Protective equipment should be worn! (helmet, gloves, knee pads, and elbow pads).
WARNING! Protective equipment should be worn. Not to be used in traffic. 20 kg maximum.
WARNING! After unpacking the tricycle parts, throw away all packages and plastic bags.
WARNING! The child needs to have special skills to use the tricycle and avoid falls or collisions causing injury to the child or third parties!
WARNING! It is suitable for children aged 12-36 months.
WARNING! Not to be used by children over 36 months due to insufficient strength.
WARNING! This product shall be assembled by an adult only.
WARNING! Before the child ride the tricycle, teach her/him how to step on the footrests, how to control the steering wheel, how to pedal, and how to get on and off. If the child can’t ride the tricycle by herself/ himself, support the tricycle by using parental control. Teach the child not to dangle her/his legs aside.
WARNING! The tricycle should be ridden on even ground. It is forbidden to ride on stairs, bridges, puddles, roads, highways, and uneven surfaces. It is forbidden to push the child while she/he is riding.
WARNING! The maximum weight of the child is 20 kg and the product is only for one child. The overloading is forbidden, otherwise, the child may be injured.
WARNING! Read the instruction for use carefully and keep them for future reference. The non-observance of the instructions may harm your child.
WARNING! Make sure the safety belt is fixed correctly.
WARNING! Before use check, if all components are connected.
WARNING! Keep small parts out of children’s reach.
WARNING! This toy has no brake! Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
EN 71-1, 2, 3

( CLEANING AND CARE )

Before use inspect if the tricycle is in good condition. If there are broken or damaged parts change them immediately. Regularly check for loose bolts/ screws.
Do not keep the tricycle in wet, very hot, or very cold places.
Clean the tricycle with a wet cloth.

WARNING! If the tricycle has been used on the beach, clean it to remove the sand and the salt from the moving parts and from the wheels.
PARTS
Picture 1

A. Handlebars
B. Rear basket
C. Safety guard
D. Brakes mechanism
E. Rear wheel
F. Pedals| – 1 pc
– 1 pc.
– 2 pcs.
– 2 pcs.
– 2 pcs.
– 2 pcs.| G. Canopy
H. Protection cap of the parent handle
I. Front wheel
J. Front basket
K. Frame
L. Seat
M. Parent handle
N. Screw| – 1 pc.
– 1 pc.
– 1 pc.
– 1 pc.
– 1 pc.
– 1 pc.
– 1 pc.
– 1 pc.
---|---|---|---

( ASSEMBLY )

ASSEMBLY OF TRICYCLE

Install the front wheel with the fender (I) to the frame (K) with the handlebars locking mechanism facing forward. Picture 2
Fit the front basket (J). Picture 3
Install the handlebars (A) on the tube of the front wheel and apply pressure until the locking mechanism engages. Picture 4. When pulling up the handlebars, it should not come out on its own without pressing the red button at the front.
Assemble the brake mechanisms (D) on both sides of the rear of the frame, making sure that the mechanism engages correctly in the grooves of the frame. Picture 5
Install the rear wheels (E) by inserting their axles into the holes of the brake mechanisms until you hear a click and the wheels lock. Picture 6
Place the seat (L) on the frame and tighten it with the screw (N) at the bottom. Picture 7
Insert the left and right parts of the safety bar © into the holes located in the back of the seat, first pushing the locking mechanisms inwards. Picture 8, after which the two parts of the fender shall pass through the opening of the foot divider, which is part of the upholstery of the seat, and fasten them at the front.
Assemble the canopy (G) to the backrest, by inserting it into the places indicated in Picture 9 until a click is heard and the canopy is locked up.
Install the rear basket (B) to the rear of the frame and secure it with the screw. Picture 10
Install the parent handle (M) to the rear of the frame until the locking mechanism clicks. Picture 11
Insert the foot pedals into the holes under the seat, making sure that the locking thumb of the pedal fits exactly into the channel of the hole. Picture 12

USE OF TRICYCLE

Activate and deactivate the brakes by depressing and releasing the pedals towards the rear wheels. Photo 13/14. Do not step on the brake while driving, as this may cause damage.
To fold and unfold the step, push the plastic ring down and move it forward or backward. Picture 15
Turn the front wheel knob counterclockwise to lock the wheel pedals. Picture 16
Turn the front wheel knob clockwise to release the pedals from the wheel. Picture 16
Adjust the backrest by pressing the red button located on its back. Photo17
Turning the seat – to turn the seat, pull the red button under it and turn it 180 degrees. Photol8
To adjust the canopy, pull the buttons on the side. Photol9
The height of the parent handle can be adjusted in two positions by releasing the locking mechanism of the tube and moving it up or down.
Pushing option. Photo 20A Warning: Attempts to overcome obstacles and apply excessive force to the handle will result in damage to the handle, which is not subject to warranty refund’1ttt1
Riding option. Photo 20B. When the safety seal and parent handle have been removed, place the protective cap (H) on the axis of the tube. Attention! When the push handle (parent handle) is removed, the freewheeling mechanism of the front wheel must be deactivated, otherwise, there is a risk of the child losing control, falling, and injuring himself/herself!
CAUTION: To avoid serious injury, always use the seat belt!
CAUTION: Always inflate the tires to a maximum pressure of 0.8 BAR (0.8 ATM) (11.6 PSI) (80 kPa)
CAUTION! The volume of the tire is very small and it inflates very quickly! Do not exceed the maximum tire pressure indicated in the instructions! This can lead to its destruction, which is not subject to a warranty refund!
Observe the maximum tire pressure indicated in the instructions, not the one marked on the tire!