SEAWAY G1 JingBao Kid Smart Eyeglasses Instruction Manual

SEAWAY G1 JingBao Kid Smart Eyeglasses

Packing details

1. JingBao Kid Smart Eyeglasses G1
2. Instruction manual
3. Charging cable

Basic parameters

Wireless communication|

Wireless communication

---|---

Reminder

|

Vibrating motor

Touch sensor

| Touch the spectacle leg to start
TOF distance Sensor| 0-4m range, 1mm accuracy
Light intensity sensor| Measure ambient light

intensity 4Klux

Ambient light

intensity

| Light intensity ranges

from 0.01 to 64Klux

Charging

|

Magnetic contactor

LED light

|

Charge indicator flashing

Working temperature|

(-20℃) to 55℃

Lithium battery

|

60mAH

Basic functions

• Touch the spectacle Leg to start the device.
• The user’s reading posture is detected by high precision 6-axis sensor.
• The user’s reading distance is detected by a high-precision distance sensor.
• The user’s reading light intensity is detected by the wide-ranged light sensor.
• The reading information listed above is analyzed synthetically when users are watching TV or computer screen, reading, doing outdoor sports, etc.
• Correct poor reading habits in children through vibrating reminders.
• Check the eye care habit on the mobile app.

APP download

Scan the QR code to download the glasses app

• Glasses function detection small program
• Scan the code to understand the APP

How to charge

• Charge the battery by connecting the USB end of the cable to the computer or any USB power adaptor.
• Connect the magnetic end of the cable to the magnetic contactor on the inner side of the spectacle leg.
• Make sure both ends of the charging cable are connected safely.
• The LED light of the spectacle leg flashes repeatedly every second during charging.
• The LED light flashes quickly for three times before battery drain, please charge in time. A full load of AI glasses usually takes half an hour.

How to start

Power on:
Touch the sensing area on the right spectacle leg, and the LED light flashes quickly for three times when the device is on.

Power off:
The glasses go into sleep mode 2 minutes after putting on the table. Touch the spectacle leg to restart.

Introduction

Device binding

Open the Bluetooth on a mobile phone, click “bind AI glasses” on APP, and then choose “bind device” (Note: Each app can only be bound to one set of AI glasses. Please unbind the old device in the APP before a new one is replaced.)

1. Within 7 days from the date of your receipt, the product has the performance failure listed in the “Product problems in warranty”. It is determined by the After-sales Service Department that you can return or exchange service free of charge;
2. From the 8th to the 15th day after the signing of the next day, the product has the performance failure listed in the “Product problems in warranty”. It is determined by the After-sales Service Department that you can have the replacement or maintenance service free of charge;
3. Within 12 months from the date of your receipt, the product has the performance failure listed in the “Product problems in warranty”. It is confirmed by the After-sales Service Department and can have the maintenance service free of
4. Please show the valid purchase records which are consistent with AI glasses before maintenance.

Guarantee exclusion

1. Unauthorized maintenance, misuse, collision, immersion Liquid, accident, modification, incorrect use of nonproduct accessories;
2. The validity of the guarantees has exceeded;
3. Damage caused by force majeure;
4. Problem isn’t listed in “product problems in warranty”;
5. “Product problems in warranty” of AI glasses caused by human factors.

Product problems in warranty

1. Bluetooth connection failure.
2. Abnormal on/off problem.
3. Abnormal sensor problem.
4. Battery, motor, or LED-related problems.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>