GENERATION LIGHTING 88132-12 Herrington One Light Outdoor Wall Lantern Instruction Manual
- June 9, 2024
- GENERATION LIGHTING
Table of Contents
GENERATION LIGHTING 88132-12 Herrington One Light Outdoor Wall Lantern
IMPORTANT SAFETY INSTRUCTIONS
- Be sure the electricity to the system you are working on is turned of other the fuse towed or the circuit breaker set at ft
- Use of other manufacturers’ components avoid warranty, sting and create a potential safety hazard.
- If you are under how to proceed, contact a qualified electrician.
- We don’t need special tools to install this fixture
- Be sure to follow the steps in the order guide.
- Flead instructions carefully.
- Save these instructions.
NOTE: This glass is handcrafted, the slght imperfections in the glass add
to the authenticity of the foxtrot.
NOTE FOR FIXTURES THAT ARE SOUND BRASS
NOTE: TO KEEP YOUR SOLID PUSHED BRASS TEXTURE LOOKING
NEW FOR YEARS T0 COME, REGULARLY APPLY A GOOD QUALITY NON-ABRASIVE CAR WAX TO
ALL METAL SURFACES, GANG THE FIXTURE AN EXTRA PROTECTIVE COATING.
BEFORE YOU BEGIN
Carefully remove the fixture from the carbon and check that all parts are included, as shown in figure 1. Be caretul not to misplace any of the screws or pars which are needed to install this fixture.
CLEANING
- To dean, wipe fixture ith a soft don. Clean glass with a mikd soap.
- Do not use abrasive materials such as scouring pads or powders, steel wool or abrashe paper.
ORDERING PARTS
Keep this sheet for tuxture eferance, and in case you need to order replacement parts. Pats for this fixture can be ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts
WET LOCATION
NOTE FOR FIXTURES LABELED FOR WET LOCATION AND USED OUTDOORS
CAUTION: To reduce he risk of electrica ahock, provide a watertight seal
between the fixture and the mounting surface by using a elcone or smla
caulking.
INSTALLATION INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>