GENERATION LIGHTING Dearborn Flush Mount Instruction Manual
- June 3, 2024
- GENERATION LIGHTING
Table of Contents
GENERATION LIGHTING Dearborn Flush Mount
GENERAL PRODUCT INFORMATION
- These fixtures are intended to be installed utilizing NEC-compliant junction boxes.
- This product is safety listed for damp locations.
- This instruction shows a typical installation.
CAUTION RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved. Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS
Install the Fixture
- If necessary, screw the shorter end of the threaded nipple tightly onto the mounting plate.
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Properly tuck the wires into the junction box, place the fixture base and washers onto the threaded nipple, and secure them in place by screwing the hex nut onto the threaded nipple. Screw the knurled nut onto the threaded nipple.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
- Install the shade to the fixture and secure it in place using the shade screws.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>