GENERATION LIGHTING 6231101-12 Vado 1 Light Outdoor Pendant Light with Clear Glass Shade Instruction Manual
- October 30, 2023
- GENERATION LIGHTING
Table of Contents
GENERATION LIGHTING 6231101-12 Vado 1 Light Outdoor Pendant Light with
Clear Glass Shade Instruction Manual
GENERAL PRODUCT INFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. This instruction shows a typical installation.
CAUTION- RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Install the Fixture
- Screw the half ball to the stem which will be on top.
- Determine the wanted height or look of the fixture with the provided stems, then assemble them by screwing them together.
- Feed the fixture wires through the stem assembly, then screw the stem assembly on top of the fixture.
- Feed the fixture wires through the collar nut, canopy, and the half ball assembly, then screw it onto the stem assembly.
- Align and secure the mounting plate to the junction box, then slide the half ball assembly onto the mounting plate.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure it in place by screwing the collar nut tightly onto the mounting plate.
- Place the shade over the socket and secure it in place by screwing the collar nut onto the socket.
- Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>