GENERATION LIGHTING 990W4187201-BKR Baker Wall Light Instruction Manual
- June 13, 2024
- GENERATION LIGHTING
Table of Contents
Installation Instructions for
Baker Wall
990W4187201-BKR
4187201
1.1
WALL
GENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer. LED
version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
SAVE THESE INSTRUCTIONS!
CAUTION RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°C supply conductors.
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
- Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting plate and secure it in place using the fixture screws.
- Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
- Install the shade by placing it onto the lamp.
©2022 Visual Comfort & Co., L.L.C. All rights reserved. The Visual Comfort &
Co. logo is a registered trademark of Visual Comfort & Co.
Visual Comfort & Co. reserves the right to change specifications for product
improvements without notification.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
Visual Comfort & Co.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>