GE 82193LO Color Effects 180-Light 19.6-ft Color Changing Integrated LED Christmas Tape Lights Instruction Manual
- June 9, 2024
- GE
Table of Contents
GE 82193LO Color Effects 180-Light 19.6-ft Color Changing Integrated LED Christmas Tape Lights
THE GUIDELINE FOR LED TAPE LIGHT
MODEL: LT-FCB-WF-5050-4W-30L-6M-Ex-C-RGB-120V
Item No: 82193L0 120V, 60Hz, 0.248A
IMPORTANT SAFETY INSTRUCTIONS
(a)READ AND FOLLOW ALL SAFETY INSTRUCTIONS
(b) Do not cover this product as the covering may cause the flexible
light to overheat and melt or ignite.
(c) Do not operate with the flexible light tightly coiled.
(d) Do not puncture, cut, shorten, or splice the flexible lighting.
(e) Do not route the cord or flexible lighting through walls, doors,
windows or any like part of the building structure.
(f) Do not use if there is any damage to the light or cord insulation.
Inspect periodically.
(g) Do not submerge flexible light in liquids, or use the product in the
vicinity of standing water or other liquids.
(h) Secure this flexible light using only the hangers or clip provided.
Do not secure this product or its cord with staples, nails, or like means that
may damage the insulation or permanently attach to the building structure.
(J) This product has a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock. This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug, if it still does not fit, contact a qualified electrician.
Never use with an ex-tension cord unless plug can be fully inserted. Do not
alter or replace the plug.
(k) All units must be unplugged before adding additional segment.
(I) Use only the same series extension segments model manufactured by the
same manufacturer, .
(m) Ensure all connections and the end cap on the last segment is tightly
secured to preclude the entry of water.
(n) Do not install on gates or doors, where subject to flexing.
(o) Do not mount or secure tape light in a manner that can cut the outer
Jacket or damage the cord insulation. Inspect the tape light carefully before
use and discard any tape light that have broken outer jacket, boss
connections, or frayed wire insulation.
(p) Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the attachment
plug is damaged.
(q) Do not rub or knead the product continuously, the smallest bending
radius is more than 8cm.
(r) Do not operate with the flexible light tightly coiled. To prevent
overheating do not allow contact between flexible light cables and parts of
light cables. Maintain at least 12mm spacing between flexible light cables or
parts of light cables.
(s) Do not install in cabinet, tanks or enclosures of any kind.
WARNING-
Risk of fire and electric shock, uncoil flexible light prior to plugging
into receptacle.
SAVE THESE INSTRUCTIONS WARNING : When using “outdoor’ use portable
lighting products, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury, including the
following: READ ALL INSTRUCTIONS
( a) Ground Fault Circuit Interrupter (GFC I) protection should be
provided on the circuits or outlet b be used for the outdoor use flexible
lighting product. Receptacles are available having built-in GFCI protection
for this measure of safety.
(b) Use only outdoor extension comb, such as type SW, SOW, STW, STOW,
SJW, SJOW, SJTW, or SJTOW. This designation is marked on the wire of the extra
ion cord. (c) Do not install closer than 3 meters from a swimming pool
surfaced
For questions and assistance Call customer service at 1 -877-39 8-7337 or
visit us on the web at
‘,1,7,tivoeticitthfrig.com
PRINTED IN VIETNAM NW
0422 MADE IN VIETNAM ©2022 Nim las Holiday Ltd., 9F, No. 37, Guangiu N. Rd.
Taipei, Taiwan 10560. All rig hts reserved .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>