BONTEMPI 24 1310, 24 1371 Electronic Rock Guitar with Headset Microphone Owner’s Manual

June 9, 2024
BONTEMPI

BONTEMPI logo24 1310 24 1371BONTEMPI 24 1310 24 1371 Electronic Rock
Guitar with Headset Microphone

Electronic Rock Guitar with headset microphoneBONTEMPI 24 1310 24 1371
Electronic Rock Guitar with Headset Microphone - qr codehttps://gqrc.it/scan/6af1229a-b637-4032-9138-ffddc77aca31

24 1310, 24 1371 Electronic Rock Guitar with Headset Microphone

BONTEMPI 24 1310 24 1371 Electronic Rock Guitar with Headset Microphone -
fig

POWER SUPPLY

Use a screwdriver to open the battery compartment. Insert 3 x 1.5 V batteries R6/AA (not supplied), ensuring correct polarity. Re-fit battery cover. Replace batteries when the quality of sound becomes bad. Use alkaline batteries to obtain a longer duration.

ATTENTION – BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged.

  • Rechargeable batteries must be removed from the product before being charged.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Different types of batteries or new and old batteries are not to be mixed.
  • Use only batteries of the same or equivalent type.
  • Batteries are to be inserted with correct polarity.
  • Remove exhausted batteries to prevent leakage.
  • Do not short circuit supply terminals.
  • Remove batteries during long periods of non-use.

WASTE DISPOSAL STANDARDS

For information regarding the disposal of the items mentioned here below, please refer to Council Administration office regarding specialised waste collection centres.

  1. DISPOSAL OF BATTERIES: Protect the environment by disposing of batteries in the special containers provided for this use.
  2. PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste collection centres. Plastic material must be placed in the relevant collection containers.

The symbols indicating the various types of plastic are:BONTEMPI 24 1310 24
1371 Electronic Rock Guitar with Headset Microphone - icon
1

Key for the different types of plastic materials:

  • PET= Polyethylene terephtalate
  • PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
  • PVC =Polyvinyl chloride
  • PP= Polypropylene
  • PS= Polystyrene, Polystyrene foam
  • O = Other polymers (ABS, Laminates, etc.)

3. DISPOSING OF ELECTRICAL APPLIANCES:
The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end  of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product  when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and  materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally.  For more information about the collection of special waste, contact your Local Authority.

SWITCHING ON/OFF

Turn on the instrument by moving the switch a , at the back of the instrument, to the ON position. To switch the instrument off move the same selector to OFF.

  1. SWITCHING ON / OFF
  2. 1 DEMOSONG
  3. 8 DEMOSONGS
  4. STOP
  5. HEADSET SOCKET
  6. SHOULDER STRAP

CONNECTING THE MICROPHONE HEADSET (supplied)
Insert the microphone plug into the socket e.
Warning!: To avoid “feed back” please place the microphone as far from the speaker as possible. Wear the headset microphone as indicated in the figure and position the  microphone as near to your mouth as possible.

HOW TO PLAY
This keyboard has 8 demosongs. Press the c key in sequence to choose the demosongs. Press the b key to listen to only one song. Press d key (Stop) to interrupt. By touching  continuously at least 2 cords with the fingers j, the melody of the song is played.
N.B.: You may find it difficult to execute this function if the skin on your fingers is dry and chafed.

HOW TO SING ALONG THE MUSIC

With the jack cable g supplied you can connect an external audio source (MP3 player, tablet, smartphone, etc., not supplied.

  1. Insert the cable into the MP3 socket h.
  2. Insert the other end of the cable into the “HEADPHONE” socket i of your music player or other audio source.
  3. Turn on the player, or other music sources and adjust the volume to balance the voice with the music; the reproduction will be monophonic because of the instrument.

TROUBLE SHOOTING GUIDE

Problem| Solution
The instrument doesn’t work or distorted sound| Batteries low – fit new batteries. Batteries incorrectly fitted – check.
If there is an irritating whistling sound| Move the microphone away from the loudspeaker.
No sound can be heard from the external music source| Check that the volume of the external musical.
ATTENTION: in the case of malfunctioning remove and re-insert the batteries

ICOM S.p.A. reserves all rights to modify specifications of this product without notice.
Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances for cleaning. Use a soft cloth dampened in a bland solution of water and neutral detergent.

Cod. 241310241371IM4
ICOM S.p.A.
Sede Legale: Via Caduti del Lavoro, 4 – 60131 Ancona – Italy
Sede Amministrativa: Viale Don Bosco, 35 – 62018 Potenza Picena (MC) – Italy
www.bontempi.com e-mail: info@bontempi.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals