BONTEMPI 24 5872 Electronic Rock Guitar Owner’s Manual
- June 3, 2024
- BONTEMPI
Table of Contents
BONTEMPI 24 5872 Electronic Rock Guitar
ICOM S.p.A. reserves all rights to modify specifications of this product
without notice. Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances
for cleaning. Use a soft cloth dampened in a bland solution of water and
neutral detergent. Dip the cloth in the solution and then wring it until it is
nearly dry.
ASSEMBLY INSTRUCTIONS
- Place the microphone rod as shown in the figure (A-B-C).
- Connect the microphone cable to the plug b.
POWER SUPPLY
Use a screwdriver to open the battery compartment. Insert 2 x 1.5V batteries R6/AA (not supplied), ensuring correct polarity. Re-fit battery cover. Replace batteries when the quality of sound becomes bad. Use alkaline batteries to obtain a longer duration.
ATTENTION – BATTERY CARE:
- Non-rechargeable batteries are NOT to be recharged.
- Rechargeable batteries must be removed from the pro-duct before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Different types of batteries or new and old batteries are not to be mixed.
- Use only batteries of the same or equivalent type.
- Batteries are to be inserted with correct polarity.
- Remove exhausted batteries to prevent leakage.
- Do not short circuit supply terminals.
- Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council Administration office regarding specialised waste collection centres.
- DISPOSAL OF BATTERIES – Protect the environment by disposing of batteries in the special containers provided for this use.
- PACKAGING DISPOSAL – Take the paper, cardboard and corrugated board to the appropriate waste collection centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
- PET= Polyethylene terephtalate
- PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
- PVC =Polyvinyl chloride
- PP= Polypropylene
- PS= Polystyrene, Polystyrene foam
- O= Other polymers (ABS, Laminates, etc.)
DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally. For more information about the collection of special waste, contact your Local Authority.
SWITCHING ON/OFF
To turn on the instrument, move the selector f to ON, located behind the
instrument itself; to turn it off, move it to OFF. When the instrument is not
used for a few moments, it will turn off automatically.
- RHYTHM SELECTIONS
- MICROPHONE SOCKET
- PICKGUARDS
- METAL CHORDS
- SHOULDER STRAP
CONNECTING THE MICROPHONE
Insert the microphone plug into the socket b. Warning!: To avoid “feed back” please place the microphone as far from the speaker as possible.
ROCK DEMOSONGS
5 rock demosongs can be played by touching at least two cords with your
fingers at the same time d.
N.B.: This function does not activate easily if you have dried skin on your
fingers.
MUSICAL INTERLUDES
By touching the pickguard c in sequence, 3 rock guitar musical interludes are played.
RHYTHMS SELECTIONS
You can select one of the 5 rhythms by pressing a buttons.
TROUBLE SHOOTING GUIDE
Problem| Solution
The instrument doesn’t work or distorted sound| Batteries low – fit
new batteries. Batteries incorrectly fitted – check.
If there is an irritating whistling sound| Move the microphone away
from the loudspeaker.
ATTENTION: in the case of malfunctioning remove and re-insert the
batteries
ICOM S.p.A. Sede Legale: Via Caduti del Lavoro, 4 – 60131 Ancona – Italy Sede
Amministrativa: Viale Don Bosco, 35 – 62018 Potenza Picena (MC) – Italy
www.bontempi.com e-mail:
info@bontempi.com
Cod. 245832245872IM1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>