DORMAN 674-694 Passenger Side Exhaust Manifold Kit Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 674-694 Passenger Side Exhaust Manifold Kit
Product Specifications
- Model Number: 674-694
- Category: Tech Notes – Installation
- Compatibility: Refer to the appropriate shop manual for vehicle-specific service procedures
- Installation Skill Level: Requires a qualified technician if lacking necessary skills
Pre-Installation Preparation
Before starting the installation process, ensure you have the] appropriate
shop manual for your vehicle.
Skill Assessment
Evaluate your skills to determine if you can successfully install the part. If
uncertain, seek the help of a qualified technician.
Safety Precautions
Pay close attention to all cautions and warnings provided in the shop manual
before proceeding with the installation.
Frequently Asked Questions (FAQ):
Q: Can I install this part without a service manual?
A: It is recommended to refer to the appropriate shop manual for specific
service procedures to ensure correct installation.
TECH NOTES: INSTALLATION
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
Ford 2010–04, Lincoln 2009–05
This Tech Note shows the torque sequence and specifications for these Ford
manifolds. NOTE: Left position is shown, the right position is similar.
Install 16 new exhaust manifold studs. Tighten to 12 Nm (106 lb·in).
Position a new gasket and
the left hand exhaust manifold and tighten the 8 nuts in the sequence shown.
Tighten to 25 Nm (18 lb·ft).
Disclaimer :
Even though every attempt is made to ensure this information is complete and
accurate, it is impossible to account for all possible circumstances or
situations. Please consult with a qualified auto technician before attempting
to perform any work you are not qualified to do. Automobiles can be hazardous
to work on; be sure to take all necessary safety precautions. Failure to do so
may result in property damage or personal injury. Certain motor vehicle
standards and performance requirements may apply to your motor vehicle (such
as Federal Motor Vehicle Safety Standards by the National Highway Traffic
Safety Administration). Be sure that your work is performed in accordance with
such standards and that you do not disable any motor vehicle safety feature.
©2018 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.