hzgamer GBT01 Tri Mode Connection Headset User Manual
- June 14, 2024
- hzgamer
Table of Contents
hzgamer GBT01 Tri Mode Connection Headset
What’s included in the box
- HZGAMER GBT01 Tri-Mode Connection Headset
- USB Receiver
- Type-C Charging Cable
- Detachable Microphone
- User Manual
System requirements
- Operating system: Windows XP/7/8/10/11: MAC OS
- One USB 2.0/3.0 port
- Devices with Bluetooth audio capability
Instruction manual
Thank you for purchasing HZGAMER GBTO1 Connection Headset.
Easily switch to BT or StrikeSpeed connection. Lift your limitations and enioy
the audio from Fantech HZGAMER headset. Move freely with lightweight design
packed with performance and uninterrupted high-qualitysound.
Technical specification
- 3 Mode Connection ( BT5.0, StrikeSpeed, Wired)
- Effective Range: 10m
- Driver Unit: 40mm
- Speaker Sensitivity: 106dB‡3dB
- Speaker Frequency Response: 20-20kHz
- Speaker Impedance: 17‡15% 2
- Microphone Dimension: 6mm * 2.7 mm
- Microphone Sensitivity: -42‡3 dB
- Microphone Impedance: 2.2K
- Battery Life: Up to 18 hours
- Charging Time: Approx 2 hours
- Weight: 170g
Headset Overview
LED indicator description
How to use
Power Switch
Long press for 3 seconds, then the headset will turn on. After powering on,
the audio will prompt “Power ON”. Long press again for 3 seconds, the headset
will turn off. and audio will prompt “Power OFF”
Double click the button to switch between 2.4Ghz & BT mode. When switching the
mode the audio will prompt according to the current mode.
Volume Switch
Volume control: Long press + and – to control volume
Music control: Double click + to skip to the next song
Double click – to rewind to the previous song
notes: Music control only works on several music media player.
Microphone Switch
Press the button to switch ON/OFF the microphone. Double click the button to
switch 7.1 surround sound and 2.0 stereo sound.
notes: Switch mode only works in StrikeSpeed & Wired mode.
How to connect
BT Connection
When turn ON the headset, it will automatically enter BT mode, long press the
Power button to start the pairing mode. When pairing blue LED will flash
quickly in the indicator light.
When successfully paired, the indicator light will light steady Blue LED.
Strike Speed Connection
Switch to StrikeSpeed mode by double click the Power button, long press the
Power button to start the pairing mode. When pairing blue LED will flash
slowly in the indicator light.
When successfully paired, the indicator light will light steady Blue LED.
Wired Mode
After plugging in the Type-C cable, the headset will power off and switch into
“Wired” mode, where music can be played through the cable.
In wired mode, the headset is automatically in charging state. In charging
state, the indicator will light steady red color.
Warm tips
- Please charge the headset with 5V IA/5V 2A charger, high voltage may damage the headset
- When the headset has not been used for more than 3 months, it needs to be charged before using.
- When the headset has not been used for a long time, we suggest you to charge every 3 months to provide good protection for the battery.
- We suggest you fully charged the headset for the first time use.
Attentions
- Please keep or use the headset in normal temperature, avoid direct sunlight.
- Please keep the headset away from fire or other hot object.
- Please keep the headset away from damp place or submerged in liquid, keep dry.
- Please don’t try to use other method for charging other than the USB charging cable we provide.
- Please don’t disassemble, repair or modify.
Warning
- If the battery is replaced improperly, there is a danger of explosion. It can only be replaced with a battery of the same type or equivalent. The battery (battery pack or assembled battery) must not be exposed to the conditions such as sunlight, fire, or similar overheating environment.
- The device should not be exposed to water droplets or water splashes. It should not be placed in objects such as vases or similar objects filled with liquids.
- This device is not a children’s toy. Children under the age of 14 need to be accompanied by parents to use.
- Using headphones for a long time at high volume may cause damage to your hearing.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliancecould void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>