BONTEMPI 54 1810 Interactive Musical Playmate Owner’s Manual

BONTEMPI 54 1810 Interactive Musical Playmate

CONTROL PANEL

1. Sound selections

2. Back to stand-by;

3. To regulate the general volume;

4. DEMO
   Selection of demosongs;

5. ON/OFF
   Switching On/Off;

6. ONE KEY ONE NOTE
   To play a demo song by pressing any key on the keyboard;

7. PLAY
   To stop the demosong;

8. RECORD
   To record the notes played;

9. PLAYBACK
   To listen to the latest recording;

10. Battery compartment

BATTERY SUPPLY

Use a screwdriver to open the battery compartment. Insert 3 x 1.5 V batteries R6/AA (not supplied), ensuring correct polarity (+/–). Re-fit battery cover. Replace batteries when the quality of sound becomes bad. Use alkaline batteries to obtain a longer duration.

ATTENTION – BATTERY CARE

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Different types of batteries or new and old batteries are not to be mixed.
• Use only batteries of the same or equivalent type.
• Batteries are to be inserted with correct polarity.
• Remove exhausted batteries to prevent leakage.
• Do not short-circuit supply terminals.
• Remove batteries during long periods of non-use.

WASTE DISPOSAL STANDARDS

For information regarding the disposal of the items mentioned here below, please refer to Council Administration office regarding specialised waste collection centres.

1. DISPOSAL OF BATTERIES:
   Protect the environment by disposing of batteries in the special containers provided for this use.

2. PACKAGING DISPOSAL:
   Take the paper, cardboard and corrugated board to the appropriate waste collection centres. Plastic material must be placed in the relevant collection containers.
   The symbols indicating the various types of plastic are:
   
   Key for the different types of plastic materials:

   • PET = Polyethylene terephtalate
   • PE = Polyethylene, code 02 for PE-HD, 04 for PE-LD
   • PVC =Polyvinyl chloride
   • PP = Polypropylene
   • PS = Polystyrene, Polystyrene foam
   • O = Other polymers (ABS, Laminates, etc.)

3. DISPOSING OF ELECTRICAL APPLIANCES
   The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally. For more information about the collection of special waste, contact your Local Authority

SWITCHING ON/OFF

To switch on the instrument move selector (5) to ON. To switch off move the same selector to OFF.
If the instrument is not used it switches itself off after a few minutes. Press (2) to reactivate it.

DEMOSONGS

This keyboard has 10 demosongs. To choose the prerecorded tracks, press the DEMO key (4) in succession. Press PLAY (7) to interrupt.

VOLUME CONTROL

Adjust volume to desired level by using the VOLUME button to increase or VOLUME  to reduce (3).

SOUND SELECTIONS

You can select one of the 8 sounds by pressing the related button (1).

RECORD/PLAYBACK FUNCTION

This function enables you to record and playback a tune played on the keyboard. Press RECORD (8) before playing a tune. When you have finished press PLAYBACK (9) to listen to the tune.

OKON – Learning function

The O ne K ey O ne N ote function allows easy playing of the melody of one of the pre-recorded songs.
Press OKON (6) to hear the first notes of the melody you want to play; to perform the melody press any of the keys in succession.

TROUBLE SHOOTING GUIDE

batteries. Batteries incorrectly ­tted – check
ATTENTION: in the case of malfunctioning remove and re-insert the batteries

ICOM S.p.A. reserves all rights to modify specifications of this product without notice.
Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances for cleaning. Use a soft cloth dampened in a bland solution of water and neutral detergent.

CUSTOMER SERVICE

ICOM S.p.A.
Sede Legale: Via Caduti del Lavoro, 4 – 60131 Ancona – Italy
Sede Amministrativa: Viale Don Bosco, 35 – 62018 Potenza Picena (MC) – Italy
www.bontempi.com
e-mail: info@bontempi.com

SCAN ME

References

• neutro.nl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>