Weiqi M3 Mini BT Speaker User Manual

Weiqi M3 Mini BT Speaker

Product Usage Instructions

Cautionary Note

• Any changes or modifications to this device that are not explicitly approved by the manufacturer could void your authority to operate this equipment.

Compliance with FCC Rules

This device complies with part 15 of the FCC Rules. To ensure proper operation, it must meet the following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Limits

• This equipment complies with FCC radiation exposure limits specified for an uncontrolled environment.
• It is important to install and operate the device with a minimum distance of 0cm between the radiator and your body.

FAQ

(Frequently Asked Questions)

Can I make changes or modifications to the device?

• No, any changes or modifications to the device that are not explicitly approved by the manufacturer can void your authority to operate the equipment.

What are the FCC rules that this device complies with?

• This device complies with part 15 of the FCC Rules, which ensures that it does not cause harmful interference and accepts any interference received.

What are the radiation exposure limits for this equipment?

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Is there a minimum distance requirement when operating the device?

• Yes, it is recommended to maintain a minimum distance of 0cm between the radiator and your body when installing and operating the equipment.

Overview

1. Speaker
2. Color Led indicator
3. Port for mic
4. Charging LED indicator
5. Micro USB socket
6. 0n/off button

Charging the battery

1. Insert the charging cable into the micro USB input port, connect the USB plug into 5V USB terminal. The LED indicator will turn on.
2. After charging completed, the LED indicator will turn off.

Note: when music sound becomes smaller and you hear the warning tone “Di Di”, please charge the speakers in time.

Pairing

BT pairing for music &phone call

1. Turn on both speakers, the speakers will have voice prompt and the indicator will flash, then double click one of them,they will pair with each otherafter 3 seconds( For the second time, both speakers will pair themselves automatically) When successfully paired, both speakers will have voice prompt, one speaker’s indicator will flash and another onet S will keep lightening.
2. Activate the BT Of your devices and search for the pairing name” M3 ‘i, and then click to pair the speakers with your devices.When succeeding in pairing, there will be voice prompt as well. When you re-connect,the speakers will connect with your device automatically.
3. Open the music app in your BT devices to play music and the color LED indicators will keep flashing; one click the button to control play/pause/get through/hang up phone call.
4. Turn of the speakers by pressing the ” ” for 2 seconds

Note: 2bout the speaker’s using environment.

1. BT connection and transmission may be affected by the surrounding environment like trees, metal and some other materials, for they can absorb or block the signal, SO the distance of data transmission may be influenced as well.
2. Please make the speaker fully charged at first time using to make sure it will work well (When the speaker’s power gets lower, the sound Will be not as good as the sound in normal case.)
3. Please do not expose the speaker into the high-temperature environment.

Specification

• Power Rating: 5 W
• Frequency Response: 20HZ-20KHZ
• THD:
• SIN: >-80DB
• Battery: 3.7V/ 300mAh

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>