BONTEMPI 48 6000 Wireless Amplifier with 2 Microphones Owner’s Manual
- June 8, 2024
- BONTEMPI
Table of Contents
48 6000 Wireless Amplifier with 2 Microphones
Owner’s Manual
https://gqrc.it/scan/87016f8c-
1f86-4d63-83b2-655b4f048e0b
48 6000 Wireless Amplifier with 2 Microphones
POWER SUPPLY
Use a screwdriver to open the battery compartment.
Insert 6 x 1.5 V batteries R6/AA (not supplied), ensuring correct polarity
(+/–). Re-fit battery cover.
Replace batteries when the quality of sound becomes bad. Use alkaline
batteries to obtain a longer duration.
ATTENTION – BATTERY CARE:
Non-rechargeable batteries are NOT to be recharged.
-
Rechargeable batteries must be removed from the product before being charged.
-
Rechargeable batteries are only to be charged under adult supervision.
-
Different types of
batteries or new and old batteries are not to be mixed. -
Use only batteries of the same or equivalent type.
-
Batteries are to be inserted with correct polarity.
-
Remove exhausted batteries to prevent leakage.
-
Do not short circuit supply terminals.
-
Remove batteries during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below, please refer to Council Administration office regarding specialised waste collection centres.
- DISPOSAL OF BATTERIES: Protect the environment by disposing of batteries in the special containers provided for this use.
- PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste collection centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate • PE= Polyethylene, code 02 for PE-HD, 04 for
PE-LD • PVC =Polyvinyl chloride • PP= Polypropylene • PS= Polystyrene,
Polystyrene foam • O= Other polymers (ABS, Laminates, etc.) a b c d
DISPOSING OF ELECTRICAL APPLIANCES:
The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally. For more information about the collection of special waste, contact your Local Authority.
SWITCH ON/OFF
Switch on the device turning the on/off knob d .
USING THE MICROPHONES
To amplify your voice, connect one or two microphones to the mic.1 a or mic.2
c sockets. Adjust the volume with the mic. +/– d knob.
HOW TO SING ACCOMPANIED BY MUSIC
A) Using the jack cable
With the jack cable f supplied you can connect an external audio source (MP3
player, iPod, smartphone, etc., not supplied).
- Insert the cable into the mp3 socket b.
- Insert the other end of the cable into the “HEADPHONE” socket g of your music player or other audio source.
- Turn on the player, or other music sources and adjust the volume to balance the voice with the music; the reproduction will be monophonic because of the instrument.
B) Wireless connection
An external audio source can be connected
(smartphone, tablet, PC, etc. – not supplied) as follows:
- Turn on Bluetooth on your smartphone, tablet, etc. and select “CZ-B003T” to pair it with your amplifier: an audible sound indicates that it is connected.
- Search through the playlist on your smartphone or computer for a song and play it. You can listen to the song through the speaker on your amplifier.
MUSIC VOLUME
You can adjust the volume of the music playing either from your player or by
turning the music volume +/– e knob.
TROUBLE SHOOTING GUIDE
Problem| Solution
The power warning light does not turn on| Check the connection between the USB
port and the charging cable.
The Wireless connection breaks down| Decrease the distance between mobile
phone and amplifier. Remove obstacles.
No sound can be heard from the external music source| Adjust the volume of the
external music source. Properly plug the cable in.
ICOM S.p.A. reserves all rights to modify specifications of this product
without notice.
Read and keep this manual for future reference.
ATTENTION: Do not use alcohol, solvents or similar chemical substances
for cleaning. Use a soft cloth dampened in a bland solution of water and
neutral detergent.
ICOM S.p.A.
Sede Legale: Via Caduti del Lavoro, 4 – 60131 Ancona – Italy
Sede Amministrativa: Viale Don Bosco, 35 – 62018 Potenza Picena (MC) – Italy
www.bontempi.com
e-mail: info@bontempi.com
Cod. 486000IM3
Documents / Resources
|
BONTEMPI 48 6000 Wireless Amplifier with 2
Microphones
[pdf] Owner's Manual
48 6000 Wireless Amplifier with 2 Microphones, 48 6000, Wireless Amplifier, 48
6000 Wireless Amplifier, Wireless Amplifier with 2 Microphones, Amplifier
---|---