BONTEMPI 48 3000, 48 3001 Wireless Headphone Owner’s Manual
- June 8, 2024
- BONTEMPI
Table of Contents
BONTEMPI 48 3000, 48 3001 Wireless Headphone
PRODUCT FEATURES
TECHNICAL SPECIFICATION
- Bluetooth version: V4.2
- Built lithium battery: 3,7V
- Operating distance: 10 m
- Jack socket: Micro USB
- Working time:
- Music & Talk: 3-4 hours
- Charging Time:
- About 1,5 hours
- Charging Voltage: DC 5V
- Speaker: 2 x 30mW
- Impedance: 32 Ω
- Frequency range:
- 20Hz – 20KHz
- Diameter speaker: 40 mm
SUPPLY
This product is powered by a lithium battery that can be recharged using the USB cable provided in the package. To recharge it, insert one end of the cable into the socket g and the other end into the USB socket of a PC or the USB socket of a 5V power supply to be connected to the power mains. The recharge time is approximately 1,5 hours while the use time for the headphone is approximately 3-4 hours
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned here below,
please refer to Council Administration office regarding specialised waste
collection centres.
BATTERY DISPOSAL: At the end of the service life of the product, the battery contained in it must be disposed of separate from general undifferentiated waste.
PACKAGING DISPOSAL: Take the paper, cardboard and corrugated board to the appropriate waste collection centres. Plastic material must be placed in the relevant collection containers.
The symbols indicating the various types of plastic are
Key for the different types of plastic materials
- PET= Polyethylene terephtalate
- PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
- PVC =Polyvinyl chloride
- PP= Polypropylene
- PS= Polystyrene, Polystyrene foam
- O= Other polymers (ABS, Laminates, etc.)
DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates that the product must not be disposed of in the domestic waste at the end of its useful life. Instead, it should be taken to your nearest designated collection point or recycling facility. Alternatively, check with your retailer and return the product when buying a replacement, on a one-to-one basis or as free of charge in case the size is smaller than 25 cm. Appropriate disposal promotes the recycling of parts and materials, as well as helping to protect the environment and human health. Under current legislation, strict penalties are enforced against those disposing of products illegally. For more information about the collection of special waste, contact your Local Authority.
SWITCHING ON/OFF
To switch on the headphones, press and hold button b for 3 seconds. The LED e
blinks blue and red alternately. To switch off repeat the same operation
HOW TO LISTEN TO MUSIC
Using the jack jack cable
- With the 3.5 mm jack jack cable supplied i you can connect an external audio source (MP3 player, smartphone, etc., not supplied) to the headphones.
- Plug one end of the cable into socket h.
- Plug the other end of the cable into the “HEADPHONE” socket of your smartphone.
- Look for a song in your playlist and play it. You can now listen to the song with the headphones.
- To adjust the volume use the “Volume” buttons of your device
Using Bluetooth
These headphones can be paired to a Bluetooth device (smartphone, PC, etc.):
- Turn the headphones on.
- Start Bluetooth in your device and select “Bontempi49” to pair your device to the headphones: a beep and the blinking blue LED e indicate that the connection was successful.
- After connecting the headphones to your device, look for a song in your playlist and play it. You can now listen to the song with the headphones.
- To adjust the volume use buttons V+ or V– c of the headphones or the “volume” buttons of your device.
- To select the previous song press button a ; to select the next song press button
LIGHT EFFECTS
It is possible to disable the light effects while a song is playing by
pressing buttons and at the same time.
TAKING A CALL
When the headphones are connected to a smartphone via Bluetooth, you can take
a call by pressing
MAKING A CALL
When the headphones are connected to a smartphone via Bluetooth, you can call
the last number dialled by pressing twice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>