PROJECT SOURCE 4767235 Biscuit Gloss Tub and Tile Chip Repair Kit User Manual

PROJECT SOURCE 4767235 Biscuit Gloss Tub and Tile Chip Repair Kit

INTRODUCTION

Thank you for purchasing this Project Source product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-389-8827, 8 a.m. – 8 p.m., EST, Monday – Sunday. You can also contact us at partsplus@lowes.com.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 2 Hours

TOOLS REQUIRE

FEELING CONFIDENT? START YOUR NEXT PROJECT

• Visit www.lowes.com for more information.

PRODUCT APPLICATIONS

IDEAL FOR:

• Chips
• Scratches
• Gouges
• Cast Iron
• Enameled Steel
• Vitreous China
• Porcelain
• Ceramic
• Gel Coat Fiberglass

USE ON:

Acrylic Paint and painted surfaces such as:

• Appliances
• Sinks
• Tubs
• Showers
• Stoves
• Refrigerators
• Washers
• Dryers
• Antiques
• and more!

SAFETY INFORMATION

• Flammable liquid and vapor.
• Causes skin irritation. Causes serious eye irritation.
• Harmful if inhaled.
• Suspected of causing genetic defects.
• Suspected of causing cancer.
• May damage fertility or the unborn child.
• Causes damage to organs.
• Causes damage to organs through prolonged or repeated exposure.
• Toxic to aquatic life.

Please read and understand this entire manual before attempting to assemble, operate or install the product.

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
• Keep container tightly closed.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Do not breathe dust/fume/gas/mist/vapors/spray.
• Avoid breathing dust/fume/gas/mist/vapors/spray.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Avoid release to the environment.
• Wear protective gloves/protective clothing/eye protection/face protection.

PACKAGE CONTENTS

• .5 oz. Touch-Up Paint
• Brush lid

APPLICATION DETAILS

• PREPARATION: In the event metal areas are exposed and rust (oxidation) is present, sand the area with 220 grit sandpaper to remove rust to bare metal. Clean the application area using a clean cloth and isopropyl alcohol for best adhesion of the product.
• VENTILATION: Open a window or place a fan for proper ventilation during application and clean up with solvents.
• PROTECTION: Wear nitrile gloves to prevent contact with skin.
• CLEAN UP: Use Isopropyl alcohol or lacquer thinner to clean up spills or overage.

INSTALLATION OVERVIEW

1. Sand with 400 grit sandpaper
2. Clean with acetone or nail polish remover.
3. SHAKE WELL
4. Using the supply brush apply the mixture color to the chipped or damaged area in layers.
5. Allow to tack dry for 7-10 minutes between layers.
   *A handheld blow dryer can be used to apply moderate heat between layers.
6. Apply several layers to build up the product for the desired fill or color.
7. Continue until paint is even with surface.
8. Keep dry until cured (2 hours)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>