DELTA MCL63-PC 3-Piece Mclaren Polished Chrome Decorative Bathroom Instruction Manual
- June 9, 2024
- Delta
Table of Contents
DELTA MCL63-PC 3-Piece Mclaren Polished Chrome Decorative Bathroom
WHAT’S INCLUDED
Included
Needed
CARE INTRUCTIONS
Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
BEFORE YOU BEGIN
- For ease of installation, READ through ALL instructions before you begin.
WARNING!
This item is not designed for use as a grab bar. Do not mount in locations
where product is likely to be used as a grab bar.
INSTALLATION INSTRUCTIONS
- Apply provided level to the template.
- Identify the four hole locations on template for your item.
- Peel backing strips from both ends of the template. Ensure template is level prior to sticking to the wall.
- Stick template to the wall by smoothing the paper from middle to ends.
- Mark hole locations and check to make sure marks are on wall. Remove template from wall.
-
Use Phillips head screwdriver to fasten anchor (C) into drywall.
NOTE: Some force may be needed to push anchor tip into drywall. -
Turn/rotate anchor clockwise into wall until the top of the anchor is flat against wall. Repeat for remaining anchors.
- Place the mounting bracket (A) (facing outward) on the wall.
- Insert screws into bracket slots and anchors.
- Turn and rotate screws (B) through bracket into anchors clockwise. Repeat for remaining bracket and screws.
NOTE: Slots in bracket allow for adjustment.
- Use Allen wrench to loosen set screw in both posts.
- Place one post over the mounting bracket with the set screw facing downward. The post must hook over the mounting bracket.
- Use Allen wrench to hand tighten set screw.
- Assemble product (as shown)The post must hook over the mounting bracket. NOTE: It is not necessary to assemble a spring loaded toilet paper holder before mounting posts on wall. Place remaining post over the mounting bracket with the set screw facing downward.
- Use Allen wrench to hand tighten set screw.
References
Read User Manual Online (PDF format)
Loading......