UBIQUITI RD-3G26 Rocket Dish User Guide

: June 9, 2024
: UBIQUITI

Table of Contents

UBIQUITI RD-3G26 Rocket Dish
Package Contents
Hardware Installation
INSTALLATION
TOOLS REQUIRED
HOW TO FIXED
Speciﬁcations
Safety Notices
Electrical Safety Information
Limited Warranty
Compliance
Online Resources
Documents / Resources

UBIQUITI RD-3G26 Rocket Dish

Package Contents

Rocket®M3/M3 GPS or RocketM365/M365 GPS (sold separately)
Phillips #1 screwdriver
16 mm or 5/8″ wrench
24 mm wrench
Shielded Category 5 (or above) cabling with drain wire should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable

UBIQUITI-RD-3G26-Rocket-Dish-FIG-1 UBIQUITI-RD-
3G26-Rocket-Dish-FIG-2

Hardware Installation

IMPORTANT: Handle the Dish Reﬂector with care. Deformations in its shape may reduce the antenna’s effectiveness. UBIQUITI-RD-3G26-Rocket-Dish-
FIG-3

IMPORTANT: The Dish Reﬂector and Antenna Feed are keyed so the Antenna Feed can only be installed in a single orientation.
IMPORTANT: Do not handle the antenna by the Antenna Feed once the feed is connected. UBIQUITI-RD-3G26-Rocket-Dish-FIG-4

INSTALLATION

UBIQUITI-RD-3G26-Rocket-Dish-FIG-5 UBIQUITI-RD-
3G26-Rocket-Dish-FIG-6

TOOLS REQUIRED

HOW TO FIXED

UBIQUITI-RD-3G26-Rocket-Dish-FIG-9 UBIQUITI-RD-
3G26-Rocket-Dish-FIG-10

Speciﬁcations

RocketDish RD-3G26

Dimensions| 650 x 650 x 300 mm

(25.59 x 25.59 x 11.81″)

(125 mph)

Wind Loading| 787 N @ 200 km/h

(177 lbf @ 125 mph)

Polarization	Dual Linear
Cross-Pol Isolation	35 dB Min.
Mounting	Universal Pole Mount, Rocket Bracket, and Weatherproof RF Jumpers

Included

Safety Notices

Read, follow, and keep these instructions.
Heed all warnings.
Only use attachments/accessories speciﬁed by the manufacturer.

WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those speciﬁed may result in improper operation, damage to the equipment or pose a ﬁre hazard if the limitations are not followed.
There are no operator serviceable parts inside this equipment. Service should be provided only by a qualiﬁed service technician.

Limited Warranty

ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.

Compliance

RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. For the speciﬁc separation distance, refer to the Quick Start Guide for your Rocket device (transmitter).
WEEE Compliance Statement

Declaration of Conformity